4FDQ - From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
YUAN, Y. - University of Leeds
15:05 - 15:10Young Tribologist Elevator Pitches
4F6X - Effect of Surface Texturing on Plasto Hydrodynamic Lubrication of Coated Forming Tools
OLIVEIRA, E. Y. G. - Universidade Federal de Pelotas
15:10 - 15:15Young Tribologist Elevator Pitches
4EKZ - Development of a Computational and Experimental Framework for Tool Surface Texture Design in Sheet Metal Forming
GUINEA, A. - Universidad de Mondragon Mondragon Unibertsitatea
15:15 - 15:20Young Tribologist Elevator Pitches
4EGF - Elasto-hydrodynamic Analysis of Non-Conformal Lubricated Contact
NASCA, L. - Politecnico di Bari
15:20 - 15:25Young Tribologist Elevator Pitches
4EMJ - Multiscale surface engineering enhances multifunctionality in wet environments
ROGKAS, N. - National Technical University of Athens
15:25 - 15:30Young Tribologist Elevator Pitches
4EJD - Using Guided Waves to Understand Liquid Film Thickness in Journal Bearings
YANG, S. - Imperial College London
15:30 - 15:35Young Tribologist Elevator Pitches
4EK2 - Role of Nanoparticles on Liquid Superlubricity across Lubrication Regimes of Non-Conformal Contacts
DANĚK, L. - Brno University of Technology
15:35 - 15:40Young Tribologist Elevator Pitches
4EYS - Water-Lubricated Superlubricity of SiC/YAG–RHA Coatings Produced by SPS
CASTRO, F. D. D. - Universidade Federal de Pelotas
15:40 - 15:45Young Tribologist Elevator Pitches
4EYE - From Friction Reduction to Friction Orchestration: Toward Sustainable Superlubricity
ZUBIETA-LABORDE, P.m - Centrale Lyon
15:45 - 15:50Young Tribologist Elevator Pitches
4FBC - Design of Novel Space Environment-Adaptive Lubricating Films Inspired by In-Orbit Exposure Findings
HE, J. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
15:50 - 15:55Young Tribologist Elevator Pitches
4FAX - Modification of load capacity property on a lubricant grease railway system contaminated with water
Ruiz R.R - Instituto Politécnico Nacional
15:55 - 16:00Young Tribologist Elevator Pitches
4DTP - Impact of water contamination on greases used in railway systems
PEREZ, J. A. G. - Instituto Politécnico Nacional
16:00 - 16:05Young Tribologist Elevator Pitches
4EEH - Exploring How Atomic-Scale Tribochemistry Establishes the Paradigm for Wafer-Scale Global Planarization of Advanced Integrated Circuits
ZHANG, L. - Tsinghua University
16:05 - 16:10Young Tribologist Elevator Pitches
4EHD - Tribochemistry of iron oxide and DBP interactions in electrified environments.
MENEZES, L. R. - Universidade Federal de Uberlândia
16:10 - 16:15Young Tribologist Elevator Pitches
4EPJ - Modeling in Tribology under Electrification
ZHU, Z. - Imperial College London
16:15 - 16:20Young Tribologist Elevator Pitches
4F46 - Geometrical properties of asperities on real contact area
KUZMAN, M. - Univerza v Ljubljani
16:20 - 16:25Young Tribologist Elevator Pitches
4FAW - EXPERIMENTAL STUDY FOR OBTAINING TRACTION CURVES IN THE RUNNIN ZONE ON RAILWAY RAIL TEXTURES
CALDERON L. A. S. - Instituto Politecnico Nacional
16:25 - 16:30Young Tribologist Elevator Pitches
4E2P - Tribo-AID Kit: An Open-Hardware, Portable Tribometer for Education and Reproducible Testing
ORGELDINGER, C. - University of Bayreuth
16:30 - 16:35Young Tribologist Elevator Pitches
4EHJ - Numerical approach of different tribological wear tests
SILVA, J. V. R. S. E. - Universidade Federal do Espírito Santo
16:35 - 16:40Young Tribologist Elevator Pitches
4EJM - Tribology in hydrogen environments: development of experimental methodologies, analysis of mechanisms and evaluation of the influence of microstructure and surface
AYERDI, A. - Universidad de Mondragon Mondragon Unibertsitatea
16:40 - 16:45Young Tribologist Elevator Pitches
4EHM - Slurry Erosive Wear of DLC (a-C) Coatings
OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
16:45 - 16:50Young Tribologist Elevator Pitches
4EY6 - DLC Coatings for Erosion and Scaling Resistance
CAMPOREZ, R. M. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
16:50 - 16:55Young Tribologist Elevator Pitches
4F4Y - Wear and fretting resistance of gas nitride layers on 3D-printed titanium alloys
LAVRYS, S. - Vytautas Magnus University
16:55 - 17:00Young Tribologist Elevator Pitches
4DSB - Ultrahigh Thermally Conductive Ag-Coated Basalt Fibers with Hierarchical Nanostructured Interfaces for Improved Anti-Wear Properties of Self-Lubricating Fabric Composites
ZHU, C. - Donghua University
17:00 - 17:05Young Tribologist Elevator Pitches
4F4Z - Plasma surface alloying: enhancing the tribological performance of automotive tooling materials through surface engineering
PIGOSSO, T. - Universidade Federal de Santa Catarina
17:05 - 17:10Young Tribologist Elevator Pitches
4EPM - EVALUATION OF ZINC ADHESION ON CAST IRON TOOL MATERIALS
BASTOS, P. P. B. - Universidade Federal de Santa Catarina
17:10 - 17:15Young Tribologist Elevator Pitches
4FBJ - Influência do pré-tratamento da superfície na adesão de pátinas formadas em um novo aço resistente às intempéries.
MENDES, H. E. G. - Universidade Federal do Rio Grande
17:15 - 17:20Young Tribologist Elevator Pitches
4EBZ - Tribological Analysis of Drill Rig Jaws: A Proposal for Wear Mechanism Characterization
SILVA, K. F. C. - Instituto Tecnológico Vale
17:20 - 17:25Young Tribologist Elevator Pitches
4EWS - Reproduction of Wear Mechanisms in Chute Lining Plates: A Tribological Study Supported by Machine Learning Classification
A.R. Cárdenas - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
17:25 - 17:30Young Tribologist Elevator Pitches
4EVA - ACCELERATING THE DEVELOPMENT OF HIGH-PERFORMANCE PM COMPOSITES: A MACHINE LEARNING APPROACH
SOUZA, E. M. - Universidade Federal de Santa Catarina
17:30 - 17:35Young Tribologist Elevator Pitches
4EWK - Polymer Based Composites for Tribology
MENDONÇA, A. S. D. - Universidade Federal de Santa Catarina
17:35 - 17:40Young Tribologist Elevator Pitches
4ETT - Engineering Interfacial Adhesion of Thin Polymer Films with Nanoscale Heterogeneities
MAJHI, C. - Indian Institute of Technology Kanpur
17:40 - 17:45Young Tribologist Elevator Pitches
4EBK - Titanium, hydroxyapatite, and bioglass coatings for enhancing the PEEK orthopaedic implants performance
SANTOS, M. G. - Universidade Tecnológica Federal do Paraná
17:45 - 17:50Young Tribologist Elevator Pitches
4ETZ - What activities are beneficial for the knee joint?
ASHIK, A. K. - Imperial College London
17:50 - 17:55Young Tribologist Elevator Pitches
4EXS - The Potential of Solid Lubricants as Friction and Wear Modifiers in Restorative Materials for Dentistry
RODZIEWICZ-WEREMCZUK, M. - Bialystok University of Technology
17:55 - 18:00Young Tribologist Elevator Pitches
4FDR - Multiscale Numerical Approach for Subject-Specific Wear Prediction of Total Knee Replacements
FEILE, K. - Friedrich-Alexander-Universität Erlangen-Nürnberg
18:00
19:30
18:0019:30
18:00 - 19:30
18:00 - 19:30
W - Welcome Reception
09:00
09:45
09:0009:45
09:00 - 09:45
09:00 - 09:45
O - Opening Ceremony
09:50
10:50
09:5010:50
EUROPA III-IV
09:50 - 10:50
Plenary
09:50 - 10:50
Chair: José Daniel Biasoli Mello (UFU) - Brazil
4FCD - Enabling the Electric Vehicle Revolution: Overcoming Materials and Tribological Challenges for a Green and Sustainable Transportation Future
ERDEMIR, A. - Texas A&M University
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
EUROPA III-IV
11:30 - 12:30
Plenary
11:30 - 12:30
Chair: Fernando Lázaro Freire Junior (PUC) - Brazil
4FCG - Advances of Solid-Liquid Combined Superlubricity (SLCS)
LUO, J. - Tsinghua University
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:50
12:4013:50
12:40 - 13:50
12:40 - 13:50
SL - Sponsor Lecture
14:00
14:40
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
Chair: Nicholas Spencer
4DY2 - Harmonious Tribo-Interfaces Enabled by Soft Matters
ZHOU, F. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
14:40
16:00
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 01
14:40 - 16:00
14:50 - 15:20Keynote Speaker
4FDG - Keynote talk - Mohamed El Mansori
MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
15:20 - 15:40Oral presentation
4DMG - How to understand the influence of ammonia on piston ring-liner tribology system?
MA, X. - Harbin Engineering University
OCEANIA-VIII
14:40 - 16:00
Surface Metrology and Contact Mechanics - Session 01
14:40 - 16:00
14:55 - 15:20Invited Speaker
4EBF - Active Bio-Contact Mechanics and Regenerative Rehabilitation of Osteoarthritic Joints
POPOV, V. L. - Technische Universität Berlin, Tsinghua University
15:20 - 15:40Oral presentation
4DNP - Linking Current Density to Wettability and Tribological Properties of Anodized 5083-Aluminum Alloys
ABID, M. - Université de Technologie de Tarbes
15:40 - 16:00Oral presentation
4DTJ - Efficient characterization of extreme pressure properties of lubricants using advanced 4-ball test methodology
KHOSLA, T. - Rtec Instruments Inc.
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 01
14:40 - 16:00
14:50 - 15:20Keynote Speaker
4FCA - Bridging Lab and Factory: Practical Applications of Ultra High Vacuum Tribology
BROITMAN, E. - Sentys Inc
15:20 - 15:40Oral presentation
4DNX - Ultra-low energy, temperature field measurement (TFM)-based early failuredetection of plain bearings
BASZENSKI, T. - RWTH Aachen University
15:40 - 16:00Oral presentation
4DT2 - Calorimetric analysis of cracking under fretting loading: endurance curve and cumulative damage method
Bruno BERTHEL - École Centrale de Lyon
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 01
14:40 - 16:00
14:50 - 15:20Keynote Speaker
4FBY - Friction and Wear Control of Key Components in Marine Power System
YUAN, Chengqing - Wuhan University of Technology
15:20 - 15:40Oral presentation
4DMD - A Path Towards Superlubricity in Real EHL Contacts
HABCHI, W. - Lebanese American University
15:40 - 16:00Oral presentation
4EKX - Boundary lubrication performance of pure glycerol on steel-bronze contact
POKHAREL, N. - Luleå University of Technology
OCEANIA III
14:40 - 16:00
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 01
14:40 - 16:00
Chair: Max Marian (LUH) - Germany (Deutschland)
14:50 - 15:20Keynote Speaker
4FD2 - Keynote talk - Prof. Taylor Sparks
Sparks, T. - University of Utah
15:20 - 15:40Oral presentation
4DPC - A Data-Driven Framework Using Bayesian Optimization and Surrogate Models for the Accelerated Multi-Objective Design of Tribological Components
César Pastor - Robert Bosch GmbH
15:40 - 16:00Oral presentation
4DQH - Physics-Informed Neural Network Framework for Static and Dynamic Performance Prediction of 3D Hydrodynamic Journal Bearings
ADESH KUMAR TOMAR - Pontificia Universidad Católica de Chile
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 01
14:40 - 16:00
14:50 - 15:20Keynote Speaker
4FDC - Keynote tal - prof. Seong H. Kim
KIM, S. H. - Pennsylvania State University
15:20 - 15:40Oral presentation
4DPS - Effect of PIB Succinimide Dispersant on the Stability and Tribological Performance of MoS₂ Nanoparticle Dispersions in PAO
Fabrice Dassenoy - École Centrale de Lyon
15:40 - 16:00Oral presentation
4DWX - Film Formation Behavior of Nanoparticles under Rolling Contact Lubrication
SUNAGAWA, Y. - Idemitsu Kosan Co.,LTd.
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 01
14:40 - 16:00
Chair: Ramin Aghababaei
14:50 - 15:20Keynote Speaker
4E6F - Multiscale Contact Mechanics with Applications
PERSSON, B. - Forschungszentrum Jülich, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
15:20 - 15:40Oral presentation
4DMS - Assessment of Electrically Induced Bearing Damage in EV Powertrains
MANJUNATH, M. - Ghent University / Universiteit Gent
15:40 - 16:00Oral presentation
4DNZ - Prognosis of Thermal Critical Conditions of Planetary Plain Bearings in Wind Turbine Gearboxes
Benjamin Lehmann - RWTH Aachen University
OCEANIA VII
14:40 - 16:00
Nanoscale Mechanisms of Friction and Lubrication - Session 01
14:40 - 16:00
Chair: Martin Dienwiebel (TC) - Germany (Deutschland)
14:55 - 15:20Invited Speaker
4FAG - Hydration Superlubricity: The Mechanism and Application
ZHANG, C. - Tsinghua University
15:20 - 15:40Oral presentation
4DME - Hydrated Ions and Hydration Superlubricity
HAN, T. - Tsinghua University China
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 01
14:40 - 16:00
14:50 - 15:20Keynote Speaker
4ESE - Atomic-level design for tribo-materials: a brief overview
MA, T. - Tsinghua University
15:20 - 15:40Oral presentation
4DMK - Laser Surface Texturing for Enhanced Tribological Performance of Polyetheretherketone (PEEK)
Laura Peña Parás - Universidad de Monterrey
15:40 - 16:00Oral presentation
4DMN - Optimization of Cutting Tool Life Through Laser Surface Texturing and Extreme Pressure Lubricants
Demófilo Maldonado Cortés - Universidad de Monterrey
14:50
16:00
14:5016:00
OCEANIA IV
14:50 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 01
14:50 - 16:00
Chair: Ian Sherrington (UNIVERSITY OF LANCASHIRE) - United Kingdom (Great Britain)
14:50 - 15:20Keynote Speaker
4DNS - Long Life Liquid-Like Solid Lubricants for Extreme Space Environments
Christopher DellaCorte - University of Akron
15:20 - 15:40Oral presentation
4DMV - A self-adaptive supramolecular gel lubricating material for space applications
Meirong Cai - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
15:40 - 16:00Oral presentation
4DNB - Time accumulation effect on multiscale contact transient modeling to piston pump with in mixed lubrication
Jian FU - Beihang University (Beijing University of Aeronautics and Astronautics)
OCEANIA V
14:50 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 01
14:50 - 16:00
Chair: Markus Wimmer (Rush University Medical Center) - United States
4DMZ - Towards Understanding the Protective Lubrication Mechanisms of Mucous Layers
GAMANIEL, S. S. - University of Twente / Universiteit Twente
15:40 - 16:00Oral presentation
4DNN - Bio-Inspired Hierarchical Laser Texturing for Enhanced Tribological Performance of Aluminum Alloys
Mohamed Abid - Université de Technologie de Tarbes
16:00
16:40
16:0016:40
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:40
18:00
16:4018:00
OCEANIA IV
16:40 - 18:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 02
16:40 - 18:00
Chair: Peter Lee (SWRI) - United States
16:40 - 17:00Oral presentation
4DNJ - Special Lubricants and Technologies for Space Science
Weimin Liu - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
17:00 - 17:20Oral presentation
4DNK - From the Shenzhou-7 Manned Spaceship to the China Space Station: The Tribological Journey of Solid Lubricating Films in Low-Earth Orbit
HE, J. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
17:20 - 17:40Oral presentation
4DSD - Tribological behavior of Inconel 718 and Cr2O3 coatings in high-temperature steam environments for gas turbine engine applications
Matheus da Silva Pinto - Concordia University
17:40 - 18:00Oral presentation
4DSE - Evaluation of Al- and Cu-based sacrificial abradable coatings for aerospace applications
Bruno Edu Arendarchuck - Concordia University Montreal
16:40
18:20
16:4018:20
EUROPA III-IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 02
16:40 - 18:20
16:40 - 17:00Oral presentation
4DN2 - Integration of Electric Arc Furnace (EAF) Steel Slag into Friction Materials: Tribological Properties, Wear, and Emissions
Giovanni Straffelini - University of Trento
17:00 - 17:20Oral presentation
4DPD - Surface analysis deployment for automotive brake system assessment
Ana Paula Gomes Nogueira - Brembo NV
17:20 - 17:40Oral presentation
4DPG - Influence of Residual Cobalt Distribution on the Tribological Performance of PDCs Treated by Ultrasonic-Electrochemical and Acid-Leaching Methods
Ying Yang - China University of Geosciences
17:40 - 18:00Oral presentation
4DV2 - Atomic Level Material Removal Mechanism of Chip Surface
QIAN, L. - Southwest Jiaotong University
18:00 - 18:20Oral presentation
4DV4 - Influence of steel cleanliness on the sliding wear resistance of railway wheels
João Vitor Raimundo Silva e Silva - Universidade Federal do Espírito Santo
OCEANIA II
16:40 - 18:20
Sustainable Tribology - Green Tribology and Energy Transition - Session 02
16:40 - 18:20
16:40 - 17:00Oral presentation
4DPQ - A Novel Triple-row Roller Bearing Test Rig for Evaluation of Grease Performance in Wind Turbines
Yonggang Meng - Tsinghua University
17:00 - 17:20Oral presentation
4DPR - Friction and wear behaviour of PLA-based bio-composites reinforced with oleaginous flax shives
MATHIAS, L. - Université de Technologie de Tarbes
17:20 - 17:40Oral presentation
4DPV - Impact of oil reconditioning on physico-chemical properties and tribological performance of lubricating oils.
Myrna Carolina Cortes Morales - Lulea University of Technology / Luleå tekniska universitet, SKF RecondOil
17:40 - 18:00Oral presentation
4DQX - Impact of Electrical Current on the Tribological Performance of MoDTC Additives
Zhengyuan PENG - Centre de Mise En Forme de Matériaux
18:00 - 18:20Oral presentation
4DRC - Investigating the Surface Fatigue Behaviour of Water-Based Lubricants in Applications Pertinent to EV Drive Units
Haochen Yao - Imperial College
OCEANIA III
16:40 - 18:20
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 02
16:40 - 18:20
Chair: Nick Garabedian (DATIN) - Germany (Deutschland)
16:40 - 17:00Oral presentation
4DR2 - A machine learning based approach for the estimation of the global energy losses of cylindrical roller bearings
Felix Pfister - Friedrich-Alexander-Universität Erlangen-Nürnberg, Engineering Design
17:00 - 17:20Oral presentation
4DR6 - Machine-Learning Potentials for First-Principles Prediction of Tribochemical Reaction Rates
Wilfred T Tysoe - University of Wisconsin-Milwaukee
17:20 - 17:40Oral presentation
4DRQ - Reproduction of Wear Mechanisms in Chute Lining Plates: A Tribological Study Supported by Machine Learning Classification
Adrián Ricardo Cárdenas Flórez - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
17:40 - 18:00Oral presentation
4DT6 - Multi-Scale Insight into Green Lubrication: Coupling ML-driven Molecular Dynamics and Experiments for Bio-derived Additives
Sophie Loehlé - TotalEnergies
18:00 - 18:20Oral presentation
4EZC - Data-Centric Investigation of Galling
KUPELIOGLU, A. - University of Southampton
OCEANIA V
16:40 - 18:20
Biotribology, Biomimetics and Food Tribology - Session 02
16:40 - 18:20
Chair: Wuge Briscoe (BRIS) - United Kingdom (Great Britain)
16:40 - 17:00Oral presentation
4DNV - Investigation of tactile perceptual descriptors by vibrotactile rendering
Livia Felicetti - Institut national des Science Appliquées de Lyon, Università degli Studi di Roma La Sapienza
17:00 - 17:20Oral presentation
4DPP - A Customized Tribometer for Assessing Cartilage Tribological Behavior Under Physiologically Representative Knee Joint Loading
Haytam Kasem - Azrieli College of Engineering
17:20 - 17:40Oral presentation
4DQP - Tribological Performance of Extruded vs. 3D-Printed PEEK in Saliva for Dental Implant Applications
PRABAKARAN SARAVANAN - Birla Institute of Technology and Science Pilani Hyderabad Campus
17:40 - 18:00Oral presentation
4DRG - Exploring the Application of Nonlinear Analysis Methods in Studying Friction in Dental Glass-Ionomer Cements
Magdalena Lepicka - Bialystok University of Technology
18:00 - 18:20Oral presentation
4DRW - Numerical Simulation of Third-Body Wear in Total Knee Replacements
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 02
16:40 - 18:20
Chair: Bo Persson (LICP, CAS) - China
16:40 - 17:00Oral presentation
4DPH - Stochastic process model of elastoplastic rough surface contact with scale-dependent hardness
Yang Xu - Hefei University of Technology
17:00 - 17:20Oral presentation
4DQE - In-situ Observation of High-Temperature Polymer Transfer Films
Shouyi Yin - Imperial College London
17:20 - 17:40Oral presentation
4DRJ - A multiscale approach for the contact and gas flow rate through flat circular large contact
Mihai ARGHIR - Université de Poitiers
17:40 - 18:00Oral presentation
4DSY - Truncation effects in the roller-end on flange contact
Patrigeon Tristan - Laboratoire de Mécanique des Contacts et des Structures
18:00 - 18:20Oral presentation
4F66 - Topography Evolution Across Grain Boundaries During Directional Scratching of Crystalline Metals
AGHABABAEI, R. - Aarhus University / Aarhus Universitet
OCEANIA VII
16:40 - 18:20
Nanoscale Mechanisms of Friction and Lubrication - Session 02
16:40 - 18:20
Chair: Martin Dienwiebel (TC) - Germany (Deutschland)
16:40 - 17:00Oral presentation
4DNR - Carbon Dot-based Ionic Liquids: A Novel Additive for Lubrication and Corrosion Inhibition Application
Songwei Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
17:00 - 17:20Oral presentation
4DPM - Projection-based Hyper Reduction for the Full-System Finite Element Solution of the Mixed Thermal Elastohydrodynamic Lubrication Line Contact Problem
Alain El Hajj - École Nationale Supérieure des Arts et Métiers
17:20 - 17:40Oral presentation
4DPT - Direct Observation and Quantification of the Lubrication Mechanism of Metal Disulfide Nanoparticles by In Situ TEM Nano-Friction Tests
Fabrice Dassenoy - École Centrale de Lyon
17:40 - 18:00Oral presentation
4DRS - Frictional Properties and Energy Dissipation Mechanisms at Layered Material Interfaces
Xiang Gao - University of Science & Technology of China
OCEANIA X
16:40 - 18:20
Surface Engineering - Session 02
16:40 - 18:20
16:40 - 17:00Oral presentation
4DMX - Humidity-Driven Tribological Mechanisms of Ground Micro-Arc Oxidation Coatings on Aluminium Alloy
Karl Delbé - Université de Technologie de Tarbes
17:00 - 17:20Oral presentation
4DNM - Tribologically Modified Tooth Geometries of Worm Wheels using AutomatedOptimization Algorithm
Luis Haug - Technical University of Munich, Gear Research Centre
17:20 - 17:40Oral presentation
4DP2 - Wear and dielectric breakdown behavior of DLC coatings with different electrical properties under DC voltage lubrication environments
Young-Jun Jang - Korea Institute of Materials Science, University of Science and Technology
17:40 - 18:00Oral presentation
4DPJ - Molybdenum Coatings for Extreme Environments: Tribological Study of PVD and APS Coatings
Ricardo Alves da Silva Crespo Martins - Leibniz University Hannover
18:00 - 18:20Oral presentation
4DPW - A bioinspired approach using hierarchically structured DLC multilayer coatings for tribological applications
Markus Polzer - Friedrich-Alexander-Universität Erlangen-Nürnberg
16:40
18:40
16:4018:40
OCEANIA-VIII
16:40 - 18:40
Surface Metrology and Contact Mechanics - Session 02
16:40 - 18:40
16:40 - 17:00Oral presentation
4DWN - Multimode Visible Optical Force Microscopy for Characterization of Two-Dimensional Materials and Nano Through-Silicon Vias
TAN, X. - Tsinghua University
17:00 - 17:20Oral presentation
4DZB - The Λ*-ratio for circular EHL contacts: robustness, sensitivity, and validity
HANSEN, J. - Lulea University of Technology / Luleå tekniska universitet, TRATON Group
17:20 - 17:40Oral presentation
4E2E - Analyzing an entire scratch cross-sectionally in a TiN film
WU, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
17:40 - 18:00Oral presentation
4E4M - Angle-Resolved and Feature-Based Approaches to Surface Texture Analysis - A Correlation Study
EIFLER, M. - IU International University of Applied Sciences
18:00 - 18:20Oral presentation
4F4E - Sliding contact temperature determination using acicular grindable thermocouple and inverse heat conduction
NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
18:20 - 18:40Oral presentation
4F6E - Partial Slip in Tangential Contact of an Elastic Quarter-Space
LI, Q. - Technische Universität Berlin
OCEANIA I
16:40 - 18:40
Tribomechadynamics, Tribotests and Monitoring - Session 02
16:40 - 18:40
16:50 - 17:20Invited Speaker
4DYT - Advancements in Triboacoustics and its Integration in Tribological Practices:A Case Study with the Triboacoustic Pin
SCHIRRU, M. - Austrian Centre of Competence for Tribology - AC2T research GmbH
17:20 - 17:40Oral presentation
4EXP - Investigations of lubricated parallel sliding contacts on a ring on disc tribometer
Poll, G. - Leibniz University Hannover
17:40 - 18:00Oral presentation
4EXY - Lab-scale testing and performance screening of gear oils
KIND, N. - German Aerospace Center
18:00 - 18:20Oral presentation
4F4R - Low-Speed Lubrication Behaviour of Greases for Wind Turbine Main Shaft Bearings Assessed by EIS
MANJUNATH, M. - Balasubramaniam Vengudusamy, Dieter Fauconnier, Ghent University / Universiteit Gent
18:20 - 18:40Oral presentation
4DZY - Experimental study of friction-induced vibrations in sliding rough contacts
LE BOT, A. - Centrale Lyon
OCEANIA IX
16:40 - 18:40
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 02
16:40 - 18:40
16:40 - 17:00Oral presentation
4DRD - Evolution of the tribofilm and wear state transition mechanism of cylinder liner and piston ring
Chang Ge - Harbin Engineering University
17:00 - 17:20Oral presentation
4DRK - Reducing friction and wear of stainless steels during food cleaning processes using sodium hydrogen carbonate
Kaouthar BOUGUERRA - Centre Technique des Industries Mécaniques
17:20 - 17:40Oral presentation
4DS2 - Mechanochemistry of Ashless Antiwear Additive
Chung Yan Leung - Imperial College London
17:40 - 18:00Oral presentation
4DSP - Tribological response of ceramic–graphene composites under ASTM G133: role of counterface, carbon content and environment
Céline TREVISIOL - Centre Technique des Industries Mécaniques
18:00 - 18:20Oral presentation
4DTH - Bridging the Gap Toward Sustainable Tribology: Environmentally Friendly Bonded MoS2-Based Solid Lubricants
Parastoo Fallah - Concordia University
18:20 - 18:40Oral presentation
4EDN - Influence of the environment on the tribological properties of a solid lubricant transfer film containing MoS2
REY, T. - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
18:20
19:20
18:2019:20
18:20 - 19:20
18:20 - 19:20
YRT - Forum Young Tribologists - Roundtable Meentoring
19:30
21:30
19:3021:30
19:30 - 21:30
19:30 - 21:30
FYT - Forum Young Tribologists - Evening
08:30
09:30
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
Chair: Marcelo Braga dos Santos (UFU) - Brazil
4FCJ - Biolubrication: from basics to applications
KLEIN, J. - Weizmann Institute of Science
09:30
10:50
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 03
09:30 - 10:50
09:30 - 09:50Oral presentation
4DPN - Heat-Treatment Effects on Microstructure and Wear of L-PBF 316L Stainless Steel
German Omar Barrionuevo - Universidad San Francisco de Quito
09:50 - 10:10Oral presentation
4DQ6 - Predicting as-built surface topography in laser powder bed fusion using in-situ thermography and thermal simulations
RAEYMAEKERS, B. - Virginia Polytechnic Institute and State University
10:10 - 10:30Oral presentation
4DQF - Integrating Morphology, Grain Size, and Concentration in PredictingSlurry Abrasiveness.
Adilson Rodrigues da Costa - Universidade Federal de Ouro Preto
10:30 - 10:50Oral presentation
4DQG - Sustainable Mineral Logistics: Advances in Slurry Pipeline Technology in Brazil
COSTA, A. R. - Universidade Federal de Ouro Preto
OCEANIA-VIII
09:30 - 10:50
Surface Metrology and Contact Mechanics - Session 03
09:30 - 10:50
09:40 - 10:10Keynote Speaker
4FD6 - Keynote talk - Prof. Tevis Jacobs
JACOBS, T. - University of Pittsburgh
10:10 - 10:30Oral presentation
4EAR - A Review of Asperity Persistence, Fully Plastic Real Contact Pressure and Hardness
JACKSON, R. L. - Auburn University
10:30 - 10:50Oral presentation
4EAY - Can we trust optical profilometry for tribofilm topography measurements? A polymer transfer film case study
YAP, K. K. - Imperial College London
OCEANIA I
09:30 - 10:50
Tribomechadynamics, Tribotests and Monitoring - Session 03
09:30 - 10:50
09:30 - 09:50Oral presentation
4DNE - From Mechanisms to Lifetime: New Insights into Grease Lubrication
GREBE, M. - Technical University Mannheim
09:50 - 10:10Oral presentation
4DRV - Oil performance loss in wet brakes and clutches
WIRKNER, J. - Technical University of Munich, Gear Research Center
10:10 - 10:30Oral presentation
4ECH - Oil Level Effects on Kinematics and Hydraulic Losses in Spherical and Full-Complement Roller Bearings Under Low Load to Prevent Smearing
BRILL, K. M. - RPTU University Kaiserslautern-Landau
10:30 - 10:50Oral presentation
4EPR - An investigation into the efficacy of relubrication cycles in reducing wear in grease lubricated pitch bearings
BARTRAM, M. - University of Sheffield
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 03
09:30 - 10:50
09:45 - 10:10Invited Speaker
4FD4 - Invited Talk - Dr. Arup Gangopadhyay
Gangopadhyay, Arup - Ford Motor Co.
10:10 - 10:30Oral presentation
4DRF - Effect of Methanol Engine Environment on Oil Degradation and Tribological Behavior of the Cylinder Liner
Yufan Zhu - Harbin Engineering University
10:30 - 10:50Oral presentation
4DRH - Thermo-Mechanical and Tribological Behaviour of Epoxy–Based Composites for Lined Rock Cavern Hydrogen Storage
Gustavo Nogueira Lopes da Silva - Lulea University of Technology / Luleå tekniska universitet
OCEANIA III
09:30 - 10:50
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 03
09:30 - 10:50
Chair: Wilfred T Tysoe (UWM) - United States
09:30 - 09:50Oral presentation
4DVN - Predicting DLC Coating Wear: Role of Material Descriptors in Deep Learning and Physics-Constrained Models
Imène Lahouij - École des Mines de Paris
09:50 - 10:10Oral presentation
4DVS - A Generalised Bearing Fault Diagnosis Model Based on Advanced Signal Processing Techniques and Multimodal Self-Supervised Learning
Amirmasoud Kiakojouri - University of Southampton
10:10 - 10:30Oral presentation
4DXP - Simulation and Performance Prediction of Gas Foil Bearings Using AI-Augmented Models
SAWICKI, J. T. - Cleveland State University
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 03
09:30 - 10:50
09:45 - 10:10Invited Speaker
4FDF - Invite talk - prof. Leonardo Israel Farfán Cabrera
FARFAN-CABRERA, L. I. - Tecnológico de Monterrey
10:10 - 10:30Oral presentation
4DTX - Influence of AC and DC Currents in Reciprocating Tribological Tests – A Novel Method for Evaluating Electrical Transmission Fluids
Ameneh Schneider - Optimol Instruments
10:30 - 10:50Oral presentation
4DW2 - Tribo-chemical analysis of a next-generation, fire-resistant, hybrid silicone-based oil
Thomas LUBRECHT - Centrale Lyon, NYCO Research Laboratory
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 03
09:30 - 10:50
Chair: Nicola Menga (POLIBA) - Italy
09:40 - 10:10Invited Speaker
4DR4 - Modelling of friction in wet grinding processes
Michael Müller - Technische Universität Braunschweig
10:10 - 10:30Oral presentation
4DT4 - From Parametric Asperity Model to Local Micropitting Risk Map for Gears
MARZOUG Abdellah - Institut national des Science Appliquées de Lyon
10:30 - 10:50Oral presentation
4DTC - MD simulations of rough contacts: Aqueous vs. oil-based lubrication
Shubham Agarwal - Universität des Saarlandes
OCEANIA VII
09:30 - 10:50
Nanoscale Mechanisms of Friction and Lubrication - Session 03
09:30 - 10:50
Chair: Thomas Reichenbach (FRAUNHOFER IWM) - Germany (Deutschland)
09:45 - 10:10Invited Speaker
4EQA - Multiscale modeling of capillary adhesion and friction
PASTEWKA, L. - Universität Freiburg
10:10 - 10:30Oral presentation
4DSG - Fracture Initiation and Crack Propagation in Linear Viscoelastic Materials
Giuseppe Carbone - Nanjing University of Science & Technology, Politecnico di Bari
10:30 - 10:50Oral presentation
4DVF - Ultrafast dynamics of electronic friction energy dissipation in defective semiconductor monolayer
Huan Liu - Tsinghua University
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 03
09:30 - 10:50
09:35 - 10:00Invited Speaker
4DVW - Design of macroscale solid superlubricating surface on steel substrate
Li Ji - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
10:00 - 10:20Oral presentation
4DPY - Defect-controlled hydrogenated tetrahedral amorphous carbon with enhanced corrosion and wear resistance in NH4OH dilute environment
Jae-Il Kim - Korea Institute of Materials Science
10:20 - 10:40Oral presentation
4DQW - Transition Metal Carbo Chalcogenides (TMCCs): a novel family of 2D solid lubricants
Edoardo Marquis - Technische Universität Wien
09:40
10:50
09:4010:50
OCEANIA IV
09:40 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 03
09:40 - 10:50
Chair: Hong Liang
09:45 - 10:10Invited Speaker
4FDH - Invited talk - Amir Kadiric
KADIRIC, A. - Imperial College, Imperial College London
10:10 - 10:30Oral presentation
4DSK - Spatially Heterogeneous Superwettability in Groove Surfaces: Anchored Plastron for Underwater Drag Reduction
Zhitao Huang - Tsinghua University
OCEANIA V
09:40 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 03
09:40 - 10:50
Chair: Feng Zhou (LICP, CAS) - China
09:40 - 10:10Keynote Speaker
4EQJ - A Multi-Station Rolling–Gliding Apparatus to Evaluate Cartilage Wear for Hemiarthroplasty
A. WIMMER, Markus - Rush University Medical Center
10:10 - 10:30Oral presentation
4DRX - In-Vitro Testing of Amorphous Carbon Coated Implants in a Servohydraulic Knee Simulator
Kevin Neusser - Friedrich-Alexander-Universität Erlangen-Nürnberg, Engineering Design
10:30 - 10:50Oral presentation
4DSF - Surface-Grafted Polymers for Adhesion and Friction Control
LI, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
10:50
11:30
10:5011:30
America
10:50 - 11:30
Session
Poster Session 01
Poster Session 01
10:50 - 11:30
4DXH - Hollomon-Jaffe Parameter and Wear Resistance of a Cold Work Tool Steel
CONCI, M. D. - Instituto Federal de Educação, Ciência e Tecnologia do Espírito Santo, Universidade Estadual de Campinas Track: 01 - Surface Engineering
4DYM - Influence of Superficial Finishing and Corrosion Inhibitors on the determination of Stern-Geary Coefficient for a Carbon Steel Corrosion
MAGALHÃES, L. D. R. - Universidade Federal de Uberlândia Track: 01 - Surface Engineering
4E4H - Friction and Adhesion of Superhidrophobic and Icephobic Concrete Coatings
NOSONOVSKY, M. - University of Wisconsin-Milwaukee Track: 01 - Surface Engineering
4E4X - Tribological analysis of scratch resistance in plasma-sprayed thermal barrier coatings (TBCs)
REIS, D. A. P. - Universidade Federal de São Paulo Track: 01 - Surface Engineering
4E6P - Mechanical and tribological properties of DLC/MoS2 adaptive coatings
KOT, M. - University of Krakow Track: 01 - Surface Engineering
ROCHA, A. S. - Universidade Federal do Rio Grande do Sul Track: 01 - Surface Engineering
4EFW - Evaluation of the tribocorrosion behavior in seawater of multilayers Cr/CrC/Cr/DLC/Cr/CNx/Cr/DLC deposited by HiPIMS on AISI 4317 steel.
CHAGOYA-SERNA, J. - Universidad de Guadalajara Track: 01 - Surface Engineering
4EG4 - Evaluation of friction and electrochemical behavior of UHMWPE biopolymer against CoCrMo
César Sedano de la Rosa - Universidad de Guadalajara Track: 01 - Surface Engineering
4EGC - Dual-Sided Replenishment Design for Grease Interfaces in Confined Clearances: Lubrication under Water Intrusion
LIU, C. L. - Qingdao University of Technology Track: 01 - Surface Engineering
4EGM - Influence of Surface Free Energy on the Slurry-Jet Erosion Behavior of Thermally Sprayed Ceramic Coatings
GRZEBIELUCKA, E. C. - Universidade Tecnológica Federal do Paraná Track: 01 - Surface Engineering
4EHG - Scratch Response in SS316L Across Rolling, Powder Metallurgy, and Additive Manufacturing
MACHADO, I. F. - Universidade de São Paulo Track: 01 - Surface Engineering
4EHN - Effect of microstructure on the friction and wear mechanisms at the shoulder-clip interface in ductile cast iron railway components
MACHADO, N. K. D. V. - Universidade Federal de Ouro Preto Track: 01 - Surface Engineering
4EHS - Tribological Behavior of Copper-Coated Basalt Fiber Reinforced Composites for EMI Shielding Applications
YOON,G. - Changwon National University Track: 01 - Surface Engineering
4EJQ - A Strategy for Protecting Surface Textures against tribocorrosion via ALD Nanofilm
JI, X. - Shantou University Track: 01 - Surface Engineering
4EJW - Abrasive Wear and Friction Behaviour of 60%WC–NiCrBSi Hardfacing Pad Welds Modified with Rare Earth Oxides
KASIŃSKA, J. . - Kielce University of Technology Track: 01 - Surface Engineering
4EQC - Comparison of tribological properties of CrN and CrN/DLC coatings under lubrication with Ringer's solution and artificial saliva
RADOŃ-KOBUS, K. J. - Kielce University of Technology Track: 01 - Surface Engineering
4EQG - The effect of the concentration of 1-butyl-3-methylimidazolium methanesulfonate in the coolant on the tribological properties of a TiAlN coating
RADOŃ-KOBUS, K. J. - Kielce University of Technology Track: 01 - Surface Engineering
4ER6 - Effect of a Cr/CrC/TaCr/TaC/DLC multilayer coating deposited by HiPIMS on the tribocorrosion behavior of a biomedical CoCrMo alloy
GARCÍA-RAMÍREZ, U. A. - Instituto Tecnológico José Mario Molina Pasquel Y Henríquez, Universidad de Guadalajara Track: 01 - Surface Engineering
4ERE - Laser Irradiation Effect on Friction Behaviour at Sliding Interfaces of Various DLC Coatings
NAKAMURA, Y. - Kyoto University Track: 01 - Surface Engineering
4ERH - Evolution of surface topography and micromechanical properties in polyurethane rail pads with service time
PAULA, S. B. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto Track: 01 - Surface Engineering
4ERT - Improvement of Lubrication Performance in Thrust Ball Bearings Using a Biomimetic Composite Surface with Self-Driven Oil Transport
WU, C. - Hangzhou Dianzi University Track: 01 - Surface Engineering
4ETC - Friction Characteristics of Valve Plate Pair of Servo Motor Pump for Launcher TVC Actuator Application
JIANGYU, Z. - Beihang University (Beijing University of Aeronautics and Astronautics) Track: 01 - Surface Engineering
4EVC - Study of tribological and corrosion properties of two-layer coatings based on TiO2-Cr2O3/Ta
KAKIMZHANOV, D. - Shakarim University Track: 01 - Surface Engineering
4EVF - The objective of this work is to study the resistance to cavitation, erosion, and synergistic wear of Cr3C2 25NiCr and WC 10Co4Cr coatings deposited by HVOF. In synergistic cavitation/erosion wear tests with sand, an increase in the wear rate occurs.
PUKASIEWICZ, A. G. M. - Universidade Tecnológica Federal do Paraná Track: 01 - Surface Engineering
4EX4 - Tribocorrosion in Grinding Media: Evaluation Using an Adapted Wet Rubber Wheel Test – ASTM G105
CAMPIDELI, V. C. - Instituto Tecnológico Vale Track: 01 - Surface Engineering
4EXE - Influence of DLC Deposition Parameters on Tribological Properties of X38CrMo16 Tool Steel
DRABIK, S. - Kielce University of Technology Track: 01 - Surface Engineering
4EYH - Gray Cast Iron coated with Inconel 625 via plasma sintering.
CARMO, T. J. D. - Universidade de São Paulo Track: 01 - Surface Engineering
4EZB - Electrotribological Performance of ILs@CQDS as Lubricant Additives
MENGMENG, L. - Hangzhou Dianzi University Track: 01 - Surface Engineering
4EZF - Wear behaviour of coatings processed by PTA-DED modified by pre-deposition of graphene nanoplatelets and graphite particles
SIPPEL, J. F. - Universidade Federal do Paraná Track: 01 - Surface Engineering
4EZH - NiAl-based coatings: Impact of WC nanoparticles addition on hardness and wear resistance
PINTO, B. A. - Universidade Federal do Paraná Track: 01 - Surface Engineering
4EZY - Microstructural and Tribological Evaluation of Martensitic Stainless Steel Coatings Applied by Submerged Arc Welding on Wrapper Rolls
Franco Jr., A. R. - Instituto Federal de Educação, Ciência e Tecnologia do Espírito Santo Track: 01 - Surface Engineering
4F2A - Morphology-driven tribological performance of FFF-3D printed PLA composites reinforced with carbonaceous fillers
DALCIN, R. L. - Universidade Federal de Santa Maria Track: 01 - Surface Engineering
4F2Q - Build-height microstructural gradients as the primary driver of dry-sliding wear in WAAM ER308LSi
DALCIN, R. L. - Universidade Federal de Santa Maria Track: 01 - Surface Engineering
4F2X - Numerical Analysis of the Mechanical Behavior of Clinched Joints in DP1300
ARRUDA, G. V. - Universidade de São Paulo Track: 01 - Surface Engineering
4F4J - Tribological Characterization of a Laser-Processed Metal Matrix-Carbide Reinforced Composite
CHABAK, Y. - Institute of Materials Research, Slovak Academy of Science Track: 01 - Surface Engineering
4F4P - Wear resistance of duplex coatings on Ti–6Al–4V alloy obtained by nitriding with subsequent PVD deposition of TiN and ZrN
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University Track: 01 - Surface Engineering
4F4Q - Wear-resistant plasma-electrolytic oxidation coatings on Ti–6Al–4V alloy synthesised in an aluminate electrolyte containing chromium oxide
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University Track: 01 - Surface Engineering
4F4S - Effect of preliminary nitriding on fretting resistance of bioactive coating on Ti-6Al-4V alloy
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine Track: 01 - Surface Engineering
4F4V - Combining physical and diffusion surface treatments for enhance the mechanical and tribological properties of titanium alloy
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Vytautas Magnus University Track: 01 - Surface Engineering
4F62 - Tribocorrosion and Scratch Behavior in Synthetic Seawater of DLC/CrC/CNx/CrC/Cr Multilayers Deposited by HIPIMS
MARTÍNEZ, M. F. - Universidad de Guadalajara Track: 01 - Surface Engineering
4F6N - Influence of the Wetting Angle of DLC Coatings Deposited on AISI 2205 in Pinon-Disk Wear Tests
LIMA, A. B. D. - Universidade Tecnológica Federal do Paraná Track: 01 - Surface Engineering
4F6Z - Friction and Wear Behavior of Vacuum-Sintered WC–Co with Recycled Grinding Sludge
VIEIRA, L. - Instituto Tecnológico de Aeronáutica Track: 01 - Surface Engineering
4FAC - Tribological analysis of coating on Hadfield steel by pin-on-disk test applied to the "core" of the fixed-tip lane changer
RIBEIRO, G. D. S. - Universidade Federal do Pará Track: 01 - Surface Engineering
4FBS - Roughness and Friction of Textured and Coated Skin-Pass Work Rolls
MONTEIRO JR., P. L. - Universidade Federal de Uberlândia Track: 01 - Surface Engineering
4FC4 - Morphological characterization of curved bronze surfaces manufactured by a photochemical machining process
GUTIÉRREZ, J. J. I. - Instituto Tecnológico Pascual Bravo Track: 01 - Surface Engineering
4FDM - Synergistic integration of ionic liquid and lubricant microcapsules for epoxy coatings with concurrent self-healing and superior wear resistance
YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 01 - Surface Engineering
4ESK - Microstructure and Tribological Properties of Cold Sprayed Amorphous Coatings
WOJCIECH ŻÓRAWSKI - Kielce University of Technology Track: 01 - Surface Engineering
4E2D - Study on the relationship between viscosity, wear debris, and lubrication regimes under three-body lubricated conditions
HORNG, J. H. - National Cheng Kung University Track: 03 - Surface Metrology and Contact Mechanics
4EJF - Tribological properties of Fe-Cu-Ni sinters prepared by ball milling and hot pressing
BOROWIECKA-JAMROZEK, J. - Kielce University of Technology Track: 01 - Surface Engineering
4ERG - Analysis of Dry Wear of Non-Heat-Treated Martensitic Stainless Steel Coating Applied in the Thermomechanical Steelmaking Process
NOVOA, J. - Universidade Federal de Pelotas Track: 01 - Surface Engineering
11:30
12:30
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4DRR - AISI 420S Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated States: Characterization and Tribological Performance
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
11:50 - 12:10Oral presentation
4DSA - Experimental investigation of tire-wear particle sizes
Alexander Schmiedhofer - Technische Universität Wien
12:10 - 12:30Oral presentation
4ETE - Green Stainless Steels as Wear Resistant Materials for Erosion-Corrosion Applications in the Agribusiness Sector
SOUZA, V. P. D. - Aperam South America, Universidade Federal de Minas Gerais
OCEANIA-VIII
11:30 - 12:30
Surface Metrology and Contact Mechanics - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4EC4 - Applying Persson’s model for manufacturing metal-polymer bonded contacts
PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
11:50 - 12:10Oral presentation
4ECT - Effect of Friction Stir Processing parameters on tribological behavior of copper
RODRIGUES, G. B. - Université Marie et Louis Pasteur
12:10 - 12:30Oral presentation
4ECV - Triboinformatics: Topological Data Analysis for rough surfaces
NOSONOVSKY, M. - University of Wisconsin-Milwaukee
OCEANIA I
11:30 - 12:30
Tribomechadynamics, Tribotests and Monitoring - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4DMF - Measurement of fundamental – basic Quantities in Piston Cylinder Assemblies: Techniques, Repeatability, Limitations and Benefits
DELLIS, P. - National Technical University of Athens
11:50 - 12:10Oral presentation
4DMT - Friction Behavior of mTBM Disc Cutter Ring Under a Reciprocating Test
PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
12:10 - 12:30Oral presentation
4DSV - Characterization of Sealing Material Behavior Under Dry Sliding Conditions for a Rotary Compressor Prototype
AUSSERER, F. - Technische Universität Wien
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4DS6 - Performance of sustainable sealing materials in hydrogen
Geraldine Theiler - Federal Institute for Material research and Testing
11:50 - 12:10Oral presentation
4DSN - Hard chrome substitution under tribological challenges: comparative study of EHCP and various coatings technologies
Céline TREVISIOL - Centre Technique des Industries Mécaniques
12:10 - 12:30Oral presentation
4DSR - ML-prediction of the Electrical Contact Resistance at the GDL–BPP Interface
Víctor Román - Flow & Optimization, Software & Services, Technische Universität Wien
OCEANIA III
11:30 - 12:30
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 04
11:30 - 12:30
Chair: Prathima Nalam (BUFFALO) - United States
11:30 - 11:50Oral presentation
4DYR - Wear Behavior Characterization through Deep Embedding Clustering
SIEBERG, P. M. - Universität Duisburg Essen
11:50 - 12:10Oral presentation
4DZW - Machine-learning-enabled interpretation of tribological deformation patterns in large-scale MD data
EHRICH, H.J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
12:10 - 12:30Oral presentation
4E4C - Enabling AI in Tribology through FAIR Knowledge Graphs
GARABEDIAN, N. - datin GmbH
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 04
11:30 - 12:30
Chair: Weimin Liu (LICP, CAS) - China
11:30 - 11:50Oral presentation
4DV6 - Friction-Induced Nonequilibrium Phase Transformation of Low-Temperature Ice
Hong Liang - Texas A&M University
11:50 - 12:10Oral presentation
4DVD - Influence of Lead on the Tribological Performance and Wear Mechanisms of CuSn-Based Coatings
AHMED, T. - Concordia University
12:10 - 12:30Oral presentation
4DVX - Friction control by in-situ ionic liquids with PPM level in fully formulated aviation engine oils
ZHAO, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA IX
11:30 - 12:30
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4DWD - Interpreting oscillatory-shear measurements of viscosity in unbounded flows to understand shear-thinning behavior of lubricants in lubricated contacts
EHRICH, H. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
11:50 - 12:10Oral presentation
4DTM - Molecular Origins of Fluid Viscosity: From Shear-Thinning to Glass Formation
Wilfred T Tysoe - University of Wisconsin-Milwaukee
12:10 - 12:30Oral presentation
4DXQ - Deteriorative Effect of Water on the Boundary Lubrication Performance of Engine Oils
LI, W. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology - Session 04
11:30 - 12:30
Chair: Rosa M Espinosa-Marzal (UIUC) - United States
11:30 - 11:50Oral presentation
4DTF - Non-invasive Characterisation of Skin Mechanics and the Effects of Menopause and Ageing
Margarida M.L.D Santos - Imperial College London
11:50 - 12:10Oral presentation
4DTW - Frictional Shear Stress Drives Particle Transport in Cartilage-like Hydrogels
Ahmed Al Kindi - University of California Santa Barbara
12:10 - 12:30Oral presentation
4DVT - Assembly of lipid–hyaluronan complexes in osteoarthritic conditions: bulk structure, tribology and surface films
Mark Rutland - Royal Institute of Technology / Kungliga Tekniska Högskolan
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 04
11:30 - 12:30
Chair: Michael Müller (TU BRAUNSCHWEIG) - Germany (Deutschland)
11:30 - 11:50Oral presentation
4DTY - Surface tension and wettability effects in EHL contacts
Abdelhadi FAKKAR - Institut national des Science Appliquées de Lyon
11:50 - 12:10Oral presentation
4EQH - Experimental Parameter Study on Starved Lubricated Macroscopic Contacts
KAMPEN, K. - Technische Universität Braunschweig
12:10 - 12:30Oral presentation
4DXJ - How fluid is distributed in a friction gap during mixed lubrication
FRÄGER, T. - Technische Universität Braunschweig
OCEANIA VII
11:30 - 12:30
Nanoscale Mechanisms of Friction and Lubrication - Session 04
11:30 - 12:30
Chair: Seong H. Kim (PSU) - United States
11:30 - 11:50Oral presentation
4DXK - Metastability and Size Effect during Transformation from Dislocation to Ripplocation in Bilayer Graphene
Wei Qiu - Tel Aviv University
11:50 - 12:10Oral presentation
4DXS - Structure and Superlubricity Mechanism of Confined Hydrated Ions
LI, Y. - Tsinghua University
12:10 - 12:30Oral presentation
4DXY - Phase Transition Structural Superlubricity
JIN, B. - Tsinghua University, University of Cambridge
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4DQY - Accelerated Evaluation of Coating Performance Through Parallel Testing
Lais M. Lopes - Falex Tribology
11:50 - 12:10Oral presentation
4DRP - The Promise of Solid Lubricants
Carsten Gachot - Technische Universität Wien
12:10 - 12:30Oral presentation
4DRZ - Tribological Behavior of Magnetron-Sputtered MAX Phases: The Role of Surface Oxides
Ronja Anton - German Aerospace Center
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
14:00
14:40
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
Chair: Mitjan Kalin (UL) - Slovenia
4FCM - How Surface Topography and Chemistry Control Lubrication
CAYER-BARRIOZ, J. - Ecole Centrale de Lyon
14:40
16:00
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 05
14:40 - 16:00
14:40 - 15:00Oral presentation
4DQZ - Development of a Wear Test Method for Emulsion Performance Evaluation
Lais M. Lopes - Falex Tribology
15:00 - 15:20Oral presentation
4DVV - Comparison of severe and mild wear test conditions for assessing low-stress sliding mild abrasive wear of commercial transfer chute lining materials
Jose Jimmy Penagos - Instituto Tecnológico Vale
15:20 - 15:40Oral presentation
4DWF - Influence of counterpart and oil formulation on wear of DLC-coated differential shafts for electric vehicles
DUFILS, J. - IREIS - HEF Group
15:40 - 16:00Oral presentation
4DWP - Tribological Comparison of Pantograph Contact Materials for Railway Sliding Electrical Interfaces
OUMER, O. - Université Marie-et-Louis-Pasteur
OCEANIA-VIII
14:40 - 16:00
Surface Metrology and Contact Mechanics - Session 05
14:40 - 16:00
14:40 - 15:00Oral presentation
4EDK - Effect of pigment volume concentration on scratch resistance of polyurethane and polyester coil coatings paint.
MILLE, N. - Université de Strasbourg
15:00 - 15:20Oral presentation
4EGN - Theoretical and experimental study of the roughness effect in normal contact of deformable bodies
BUKOVSKII, P. - Ishlinsky Institute for Problems in Mechanics RAS
15:20 - 15:40Oral presentation
4EKF - Friction reduction of paraffin-based mineral oils in low-temperature environments
DAICHI, M. - Nagoya University
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 05
14:40 - 16:00
14:50 - 15:20Invited Speaker
4F2E - Fretting Wear of Oscillating Ball Bearing
NELIAS, D. - Laboratoire de Mécanique des Contacts et des Structures
15:20 - 15:40Oral presentation
4F2C - Tribological Investigations under Varying Pressure Atmosphere
ZAK, F. - Optimol Instruments Prüftechnik GmbH, Technische Universität München
15:40 - 16:00Oral presentation
4F6T - Development of an Experimental Apparatus for Investigating Preload Loss in Bolted Joints under Cyclic Shear Loading
ARDILA, M. A. N. - Laboratorio de Tecnologia em Atrito e Desgaste
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 05
14:40 - 16:00
14:40 - 15:00Oral presentation
4DST - Tribofilm Formation of Lubricant Additives in Ammonia Atmosphere
Jie Zhang - Imperial College London
15:00 - 15:20Oral presentation
4DSX - Lubricity of Ethanol-Containing Gasoline
Jie Zhang - Imperial College London
15:20 - 15:40Oral presentation
4DTA - Efficiency of sampling airborne wear particles generated by a pin-on-disc setup
NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
15:40 - 16:00Oral presentation
4DTK - What is a wear part?
Mathias woydt - MATRILUB
OCEANIA III
14:40 - 16:00
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 05
14:40 - 16:00
Chair: John F. Curry (SNL) - United States
15:00 - 15:20Oral presentation
4E6A - Similarity Mapping and Interpretable Machine Learning Reveal Patterns in Perfluoroalkyl Substances (PFAS) Adsorption Across Surfaces
NALAM, P. - University at Buffalo
15:20 - 15:40Oral presentation
4EAA - i-TRIBOMAT: A Global Knowledge and Data Hub for Tribology
BORRAS, X. - i-TRIBOMAT: The European Tribology Centre
15:40 - 16:00Oral presentation
4EDP - Tool Wear–Driven Tribological Evolution in Surface Milling of Aluminum using Explainable AI
KNOBLAUCH, R. - École Nationale Supérieure des Arts et Métiers
OCEANIA IV
14:40 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 05
14:40 - 16:00
Chair: Nuria Espallargas
15:00 - 15:20Oral presentation
4DWQ - Tailoring Mechanical and Tribological Performance of Fabric Composites via Microcapsule Size Design
ZHANG, Z. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
15:20 - 15:40Oral presentation
4DXC - Concept of Steady-State Fluid Drag Reduction Based on Biomimetic Superhydrophilic Interfaces
YANG, W. F - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
YU, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 05
14:40 - 16:00
14:40 - 15:00Oral presentation
4E2Z - Size-driven tribo-chemical activity: Near-atomic-scale phosphorus-based particles enable self‑adaptive high‑stress macro-superlubricity via refactoring the carbon-based film from lubricating oil
GAO, P. - Tsinghua University
15:00 - 15:20Oral presentation
4E4P - Self-Lubricating PEEK Composite Based on Mechanically Responsive Hydrogel Microcapsules
XU, W. - Tsinghua University
15:20 - 15:40Oral presentation
4E4R - Neutron reflection Characterisation of Lipid Analogues Adsorption at Steel/water Interface for Water-based Lubrication
HU, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
15:40 - 16:00Oral presentation
4E66 - Tribochemistry of iron oxide and DBP interactions in electrified environments.
MENEZES, L. R. - Universidade Federal de Uberlândia
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 05
14:40 - 16:00
Chair: michele ciavarella (POLIBA) - Italy
14:50 - 15:20Invited Speaker
4E6T - Multiscale In Situ Investigations and Multiphysics Models of Aqueous Gel Interfaces
PITENIS, A. A. - University of California Santa Barbara
15:20 - 15:40Oral presentation
4DXX - Synchrotron In-situ Investigation of Multi-scale Polymer Tribological Response
ALGAZZAR, A. - Lulea University of Technology / Luleå tekniska universitet
15:40 - 16:00Oral presentation
4DYG - 3D adhesive contact mechanics: A variational energy-based approach
SANTERAMO, M. - Politecnico di Bari
OCEANIA VII
14:40 - 16:00
Nanoscale Mechanisms of Friction and Lubrication - Session 05
14:40 - 16:00
Chair: Fabrice Dassenoy (EC-LYON) - France
14:50 - 15:20Keynote Speaker
4FDB - Keynote talk - Prof. Lucio Isa
Isa, Lucio - Swiss Federal Institute of Technology / Eidgenössische Technische Hochschule ETH Zürich
15:20 - 15:40Oral presentation
4DYV - Recent Lessons in Assessing Carbon Nanotubes’ Impact on Oil Tribological and Thermal Properties Using Standard Methods
QU, J. - Oak Ridge National Laboratory
15:40 - 16:00Oral presentation
4E2A - Surface Polarity Dominates Hydration Lubrication via Interfacial Ion Configuration in the Helmholtz Plane
HAN, J. - Tsinghua University
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 05
14:40 - 16:00
14:40 - 15:00Oral presentation
4DSJ - 3 in 1 powder coatings with implemented antifriction function
Dr. Michaela Gedan-Smolka - Leibniz-Institut für Polymerforschung Dresden
15:00 - 15:20Oral presentation
4DSQ - Simulating Damage Mechanisms in Quasistatic Sliding Contact of Friction Enhancing Surface Structures
Jonathan Schanner - Technische Universität Chemnitz
15:20 - 15:40Oral presentation
4DSS - Processing Relationships in Hybrid MXene Coatings for Advanced Solid Lubrication
Martin Nastran - Technische Universität Wien
15:40 - 16:00Oral presentation
4DTG - Understanding tribological behavior of new REACh compliants sealed anodization of aluminum alloys
Marc Schmittbuhl - École Centrale de Lyon
14:50
16:00
14:5016:00
OCEANIA V
14:50 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 05
14:50 - 16:00
Chair: Jacob Klein (WEIZMANN) - Israel
14:55 - 15:20Invited Speaker
4DMH - Gradients in Mucin: The Tear Film's Trick for Shear Invariance via Expanding Shear Zones
SAWYER, W. G. - Moffitt Cancer Center
15:20 - 15:40Oral presentation
4DWV - Design and Manufacturing of Mechanically Robust Superlubricious Artificial Joints and Menisci
MA, S. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
15:40 - 16:00Oral presentation
4DYD - Role of membrane associated mucins (MAMs) in boundary lubrication of corneal surface
SHARMA, P. K. - University Medical Center Groningen
16:00
16:40
16:0016:40
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:00
16:40
16:0016:40
America
16:00 - 16:40
Session
Poster Session 02
Poster Session 02
16:00 - 16:40
4DQB - Study on Friction Mechanism and Application of Nano-TiO2 Additive with Different Structures under Extreme Working Conditions
LI, J. - Shanghai Advanced Research Institute, Chinese Academy of Sciences Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DRT - Electric-field Control of Physifriction and Chemifriction in Sliding h-BN Contacts
Penghua Ying - Xi'An Jiaotong University Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DTT - Composite Nanolubricants for Wear Reduction in Mechanical Interfaces: Leveraging Diffusion and Atomic Disorder
Hua Jiang - Hubei Longzhong Laboratory, Wuhan University of Technology Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DTV - Load-Dependent Bimodal Friction at Super-Moiré Interfaces
Guorui Wang - University of Science and Technology of China Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DVG - Influence of electrical current on the tribological performance of functionalized nanoparticles anti-wear additivesabstract for a poster
Zhengyuan PENG - Centre de Mise En Forme de Matériaux Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DWA - Effect of Silver Addition on the Tribological Properties of High Entropy Alloys
Wojciech Łoński - Łukasiewicz Research Network - Institute for Sustainable Technologies Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DYX - Phenomena and Mechanisms of Boundary Lubrication through Molecule Simulation and Experiment
SHI, J. - Northwestern Polytechnology University Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4E6V - Grease Film Thickness and Availability in Thermoplastic Rolling-Sliding Contacts
SCHMID, F. - Technical University of Munich, Gear Research Center Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4E6X - Superlubrication and Energy Consumption of Two-Dimensional Materials
LIU, Y. - Tsinghua University Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4EBA - Geometrical properties of asperities on real contact area
KUZMAN, M. - Univerza v Ljubljani Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4ECY - Real-Time Digital Image Correlation for In-Situ Analysis of Frictional Slip and Fracture in Tribological Contacts
Yang, Y. - Nanjing University of Science & Technology Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4EKG - Multiscale Screening of Self-Lubricating Graphene-Reinforced Epoxy and IPN Nanocomposites under Dry Sliding
Maru, M.M. - National Institute of Metrology, Quality and Technology Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4EVH - Asperity sliding contact in the presence of adhesion
Uzair Iqbal - Indian Institute of Science, Bengaluru Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4EZK - Deep learning and reactive force fields in the context of molecular dynamics simulations of doublewall carbon nanotube-based nanobearings friction performance
C.S. Abreu - Instituto Superior de Engenharia do Porto Track: 04 - Nanoscale Mechanisms of Friction and Lubrication
4DP6 - Protic Oil-soluble Ionic Liquids: The Structure Design and Lubrication Mechanism Study
HU, L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4DPX - Enhancing Tribological Performance through Tribochemical Mechanisms and Surface Engineering
Xudong Sui - Technische Universität Wien Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4DQD - Influence of Additive Treatment on Tribo-film Formation and Tribological Behaviour in Automatic Transmission Fluids
AHMAD, M. A. B. - Universiti Teknologi Mara Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4DVY - Wear resistance of cermet titanium-based materials with hBN addition
Remigiusz Michalczewski - Łukasiewicz Research Network - Institute for Sustainable Technologies Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4EBG - Effect of ZDDP Molecular Structure on the Tribological Durability of Fully Formulated Engine Oils under High-Load SRV Reciprocating Tests
GUAN, Yue - PetroChina Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4EMB - Cavitation Models for Hydrodynamic Journal Bearings
FERREIRA, N. A. - Universidade Estadual de Campinas Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4ENA - Self-lubricating High-Entropy Alloy & Transition Metal Dichalcogenide Composites: Tribological Performance and Mechanisms
BYEON,D. - Changwon National University Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4EQP - Influence of Thrust Bearing Geometry on Pressure Distribution and Load Capacity
SIMÕES, R. C. - Universidade Estadual de Campinas Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4EV4 - Evaluation of the Tribological Behavior of Greases: An Approach Based on Infrared Spectroscopy (FTIR) and Mini-Traction Machine Measurements
ALMEIDA, L. S. - Universidade de São Paulo Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4EYG - Tribological Performance of Rail Greases for Wheel Flange–Rail Gauge Face Contact: A Comparison between Pin on Disc and Sphere on Disc Tests
FERRER, B. P. - Universidade Tecnológica Federal do Paraná Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4EYP - Effect of Graphene Additives on Inconel 625 Processed by Spark Plasma Sintering
SILVA, N. M. - Escola Politécnica de Universidade de São Paulo Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4F6A - Non - Bituminous High Performance Railroad Traction Motor Gear Lubricant
NAGARKOTI, B. S. - Stanlubes and Specialities India Pvt Ltd Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4F6J - Effects of friction modifier on stick-slip properties of wet clutch tra nsmission fluid for AWD differentials
TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4FAF - MoS2 Shell Microcapsules Assembled from Nanoflower Structures: A Stimuli-Responsive, High-Efficiency Lubricant
WANG, T. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
4FC2 - Metal-node-dependent lubrication performance and tribochemistry of mono- and bimetallic MOF-based additives
Cheng, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 05 - Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives.
16:40
18:00
16:4018:00
EUROPA III-IV
16:40 - 18:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 06
16:40 - 18:00
16:40 - 17:00Oral presentation
4DWR - Atomistic study of material removal behavior during ultrasonic vibration assisted nanoscratching of single-crystal AlN
XIAO, C. - Southwest Jiaotong University
17:00 - 17:20Oral presentation
4DWZ - Mechanistic analysis and data-driven prediction of churning losses in multi-shaft transmission systems
ZHANG, W. - Tsinghua University
17:20 - 17:40Oral presentation
4DXM - Predicting the Evolution of Fretting Wear in Spline Couplings Under Representative Conditions
GICHUKI, A. - University of Nottingham
17:40 - 18:00Oral presentation
4DXT - Hydrogen-Related Alterations in Aluminum Alloy Piston Materials for Hydrogen Combustion Engines Following Deuterium Irradiation
MATSUMOTO, Y. - Tokyo City University
OCEANIA-VIII
16:40 - 18:00
Surface Metrology and Contact Mechanics - Session 06
16:40 - 18:00
16:40 - 17:00Oral presentation
4ENY - Effect of non-stationary frictional heating on contact of viscoelastic coatings
TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS
17:00 - 17:20Oral presentation
4ENZ - Mechanics-Driven Design of Patterned Steel Floor Plates for Enhanced Slip Resistance and Fatigue Durability
QIAN, L. - Imperial College London
17:20 - 17:40Oral presentation
4EPW - Durability study on haptical features of coatings of product and its surface
WEINHOLD, P. D. W. - Institute of Surface Product Analysis
17:40 - 18:00Oral presentation
4ESY - In-situ measurement of ultra-thin lubricant films under extreme loads in large water-lubricated graphite bearings
DOU, P. - Imperial College London, Xi'An Jiaotong University
OCEANIA I
16:40 - 18:00
Tribomechadynamics, Tribotests and Monitoring - Session 06
16:40 - 18:00
16:40 - 17:00Oral presentation
4DNT - The Spark and the Slide: Investigating Coupled Tribo-Electrical Phenomena in EV Drivetrains
Damien Yiyuan Khoo - Bruker
17:00 - 17:20Oral presentation
4DYK - Triboelectroscopy: A New Tool for Real-Time Friction–Current Correlation
Abreu, Demian - Universidade Federal de Uberlândia
17:20 - 17:40Oral presentation
4EQD - Experimental Characterization of Adhesion and Electroadhesion in Soft Contacts with Simultaneous Contact Area Measurement
PORTALURI, L. - University of Salento
17:40 - 18:00Oral presentation
4F2S - A Transient Electromagnetic Field Model for Non-Ferromagnetic Particles with Motion Effects: Mechanism Analysis and Experimental Validation
ZHAO, Bin - Harbin Engineering University
OCEANIA II
16:40 - 18:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 06
16:40 - 18:00
16:40 - 17:00Oral presentation
4DVM - A modified bio-oil from Schizochytrium sp. microalgae as a lubricity improver
Alejandro García Tuero - Universidad de Oviedo
17:00 - 17:20Oral presentation
4DW4 - Designing safe and sustainable lubricant additives with reactive molecular dynamics
EDER, S. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH
17:20 - 17:40Oral presentation
4DWJ - Tribological Properties of Melamine Long-Chain Alcohol Ester Derivatives as Friction Modifiers at High Temperatures
Wenjing Hu - Shanghai Advanced Research Institute, Chinese Academy of Sciences
17:40 - 18:00Oral presentation
4DWK - Sustainable Energy Transition for Sustainable Tribology: An Assessment using Machine Learning
T V V L N Rao - MIT Art, Design and Technology University
OCEANIA III
16:40 - 18:00
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 06
16:40 - 18:00
Chair: Maria Clelia Righi
16:40 - 17:00Oral presentation
4EGG - A Predictive Framework for Friction and Wear of DLC Coatings Using Literature Data
LAHOUIJ, I. - École des Mines de Paris
17:00 - 17:20Oral presentation
4EMG - Explainable Machine Learning for Predicting Galling in API Steels from Friction and Mechanical Data
PRIETO, G. - Consejo Nacional de Investigaciones Científicas y Técnicas, Universidad Nacional del Sur
17:20 - 17:40Oral presentation
4ENK - Predictability and Explicability: an interpretable Deep-Learning model to predict friction from third body morphology
BOULEFRAKH, K. - Institut national des Science Appliquées de Lyon
17:40 - 18:00Oral presentation
4EPE - Digital Twins of Lubricated Systems and Their Evolution
KALIAFETIS, F. - Imperial College London
OCEANIA IV
16:40 - 18:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 06
16:40 - 18:00
Chair: Mitjan Kalin (UL) - Slovenia
16:40 - 17:00Oral presentation
4DY4 - Tribo-corrosive response of newly developed high entropy ceramic under saline environment
Guruvayurappan, A. - Indian Institute of Technology Delhi
17:00 - 17:20Oral presentation
4DYA - Shaft Sealing Mechanism for Dual-Axis Motion under High-Pressure Conditions
NAKANISHI, Y. - Kumamoto University
17:20 - 17:40Oral presentation
4DYJ - Tailoring the microstructure of MEROX for tribological use in extreme environmental conditions
KUMAR, D. - Indian Institute of Technology Delhi
17:40 - 18:00Oral presentation
4DYQ - Shaft Sealing Mechanism for Low-Speed Motion under High-Pressure Conditions Based on Hydration Boundary Lubrication
H, UCHIZONO. - Kumamoto University
OCEANIA IX
16:40 - 18:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 06
16:40 - 18:00
16:40 - 17:00Oral presentation
4EAK - Lubrication at the Electrified Surfaces: Atomistic Insights
ZHU, Z. - Imperial College London
17:00 - 17:20Oral presentation
4EAM - Lubricant behaviours in electrified tribology
ZHAO, Y. - Imperial College London
17:20 - 17:40Oral presentation
4ECA - Co-optimizing friction and conductivity of carbon tribofilms on Pt-Au alloys
DELRIO, F.W. - Sandia National Laboratories
17:40 - 18:00Oral presentation
4DQS - Tribocatalytic Carbon Tribofilm for Ultra-Low Wear of PEEK Composites under Fuel Lubrication
Chao Wang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA V
16:40 - 18:00
Biotribology, Biomimetics and Food Tribology - Session 06
16:40 - 18:00
Chair: Magdalena Lepicka (BUT) - Poland
16:40 - 17:00Oral presentation
4DZ4 - Biomimetic Design of MOFs-based Arthritis Lubricating Nanocarriers
LIU, J. - Northwestern Polytechnical University
17:00 - 17:20Oral presentation
4DZH - Enhancing Tribological Performance and Wettability of Snakeskin-Inspired Surfaces via PDLLA Nanosheets
IBRAHIM, M. D. - Universiti Malaysia Sarawak
17:20 - 17:40Oral presentation
4E2H - Surface Modification of 3D Biomimetic Shark Denticle Structures for Drag Reduction
Zhichao Dong - Technical Institute of Physics and Chemistry, Chinese Academy of Sciences
17:40 - 18:00Oral presentation
4FBE - Tribological Assessment of Femtosecond Laser Textured EBM Ti6Al4V-ELI for Biomedical Purposes
PIERETTI, E. F. - Intituto de Pesquisas Energéticas e Nucleares
OCEANIA VI
16:40 - 18:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 06
16:40 - 18:00
Chair: Angela A. Pitenis (UCSB) - United States
16:40 - 17:00Oral presentation
4DZ6 - A Multiscale Transient Framework for Mixed Lubrication Modelling in Total Hip Replacement Bearings
FURZE, R. - University of Leeds
17:00 - 17:20Oral presentation
4E2N - How Does Ammonia Alter Lubricant Performance: An Experimental and Molecular Dynamics Study on Microstructural Evolution and Viscosity Changes
Xu,X. - Harbin Engineering University
17:20 - 17:40Oral presentation
4E4Y - Influence of roughness frequency cut-off in simulations of lubrication of rough surfaces
BRUNETIERE, N. - Institut Pprime
17:40 - 18:00Oral presentation
4E6D - Simple Models of Viscoelastic Fibrillar Adhesion Between Elastic Solids
CIAVARELLA, M. - Politecnico di Bari
OCEANIA VII
16:40 - 18:00
Nanoscale Mechanisms of Friction and Lubrication - Session 06
16:40 - 18:00
Chair: Matteo Delli Colli (FRA) - France
17:00 - 17:20Oral presentation
4EA4 - Crystallinity-Dependent Tribological Behavior of Molybdenum Disulfide: Insights from Experiments and Atomistic Simulations
WANG, Y. - Czech Technical University
17:40 - 18:00Oral presentation
4EB6 - Submicron scale asperity strain hardening
KUZMAN, M. - Univerza v Ljubljani
OCEANIA X
16:40 - 18:00
Surface Engineering - Session 06
16:40 - 18:00
16:40 - 17:00Oral presentation
4DVE - Regulating Composition, Structure, and Friction Properties of Sputtered MoS₂ Films through Trace Metal (Pt, Au, Cu) Doping
Bin Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
17:00 - 17:20Oral presentation
4DWB - Influence of MoS₂ content on the tribological behavior of double-transfer solid lubrication systems
Thomas Rey - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
17:20 - 17:40Oral presentation
4DWE - Tribological properties of DLC coatings in high-pressure gaseous hydrogen
Johnny Dufils - IREIS - HEF Group
17:40 - 18:00Oral presentation
4DZE - Influence of the Steel Disk Topography on the Friction Behavior of Wet Brakes and Clutches
STROBL, P. - Technical University of Munich, Gear Research Center
18:00
19:30
18:0019:30
18:00 - 19:30
18:00 - 19:30
RT - Round table International Cooperation
08:30
09:30
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
Chair: José Daniel Biasoli Mello (UFU) - Brazil
4DMM - Tribology and Energy Transition: a Brazilian Perspective
Henara Lillian Costa - Universidade Federal do Rio Grande
09:30
10:30
09:3010:30
OCEANIA I
09:30 - 10:30
Tribomechadynamics, Tribotests and Monitoring - Session 07
09:30 - 10:30
09:40 - 10:10Invited Speaker
4FCB - Real-world tribology testing is all about the art of deception
LEE, P. - Southwest Research Institute
10:10 - 10:30Oral presentation
4DX4 - Fretting Wear Analysis and Optimization Design of Rope Sheave Lifting Mechanism
YAOSHIJIE, - Harbin Engineering University
09:30
10:50
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 07
09:30 - 10:50
09:30 - 09:50Oral presentation
4DZT - Airborne wear particle emissions from a light aircraft brake
TSYBRII, Y. - Gdansk University of Technology / Politechnika Gdanska
09:50 - 10:10Oral presentation
4E2V - Manufacturing of hybrid bearing washers using a novel carbide containing alloy
FAQIRI, Y. - Universität Hannover
10:10 - 10:30Oral presentation
4E42 - Performance Evaluation of transfer learning for surface damage identification in tribological systems
AKHBARI, S. - TriboDENS ltd
10:30 - 10:50Oral presentation
4E4B - Experimental and Numerical Investigation of Biodegradable Hydraulic Lubricant Performance in Axial Piston Pumps
MARTINS FERREIRA, P. - TotalEnergies
OCEANIA-VIII
09:30 - 10:50
Surface Metrology and Contact Mechanics - Session 07
09:30 - 10:50
09:45 - 10:10Invited Speaker
4FDA - Invited talk - Mohamed EL Mansori
MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
10:30 - 10:50Oral presentation
4EXK - Effect of Surface Roughness on Scuffing Damage in Rolling-Sliding Contacts
FAZZIO, O. - Imperial College London
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 07
09:30 - 10:50
09:30 - 09:50Oral presentation
4DXD - Numerical investigation of the effects of abrasive particles in lubricating oil on the performance of hydrodynamic journal bearings used in aircraft engine power transmission systems
BOUAJILA, H. - Université de Poitiers
09:50 - 10:10Oral presentation
4DYE - Bubble-assisted electrochemical MXenes as novel sustainable solid lubricant.
BILOTTO, P. - Technische Universität Wien
10:10 - 10:30Oral presentation
4DYH - A Boundary Element formulation for polymer bearings steady-state response
SANTERAMO, M. - Politecnico di Bari
10:30 - 10:50Oral presentation
4DYP - Graphene oxide as an additive in aqueous lubricants containing glycol and glycerol
NAJJARI, R. - Loughbrough university
OCEANIA III
09:30 - 10:50
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 07
09:30 - 10:50
Chair: Ilia Bagov
09:40 - 10:10Invited Speaker
4FBA - High-Throughput Testing & Machine Learning Based Discovery of Novel Alloys
CURRY, J.F. - Sandia National Laboratories
10:10 - 10:30Oral presentation
4EQ6 - Semantically Grounded AI for Tribological Creativity on Demand
GARABEDIAN, N. - datin GmbH
10:30 - 10:50Oral presentation
4ERF - Machine Learning-Based Prediction of Tribological Behavior in In-Situ Reinforced NbC-Fe Metal Matrix Composites
SOUZA, E. M. - Universidade Federal de Santa Catarina
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 07
09:30 - 10:50
09:40 - 10:10Keynote Speaker
4FDD - Keynote talk - Koshi Adachi
ADACHI, K. - Tohoku University
10:10 - 10:30Oral presentation
4EET - Effect of simultaneous use of corrosion inhibitor and anti wear additive on the resulting wear and corrosion protection
REIMERS, M. - MSE - RWTH Aachen University
10:30 - 10:50Oral presentation
4EFP - Micro-particles: toward a revolution in tribology
ZUBIETA-LABORDE, P.m - Centrale Lyon
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 07
09:30 - 10:50
Chair: Carmine Putignano (POLIBA) - Italy
09:40 - 10:10Keynote Speaker
4FAS - Multifield Contact-Lubrication Theories, Applications, and Modeling Approaches
WANG, Q. J. - Northwestern University
10:10 - 10:30Oral presentation
4E6E - How sliding creates universal self-affine fractal surfaces
XU, R. - Forschungszentrum Jülich, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
10:30 - 10:50Oral presentation
4EN4 - Homogenized Response of a Periodically Heterogeneous Elastic Half-Space
LI, Z. - Sorbonne University
OCEANIA VII
09:30 - 10:50
Nanoscale Mechanisms of Friction and Lubrication - Session 07
09:30 - 10:50
Chair: Michael Moseler (UNI-FREIBURG) - Germany (Deutschland)
09:40 - 10:10Keynote Speaker
4DTB - Self-lubrication vs. plasticity: MD perspectives on ice and rock friction
Martin H. Müser - Universität des Saarlandes
10:10 - 10:30Oral presentation
4EDJ - Vacuum Thermal Treatment for Achieving Superlubricity by Nanodiamond and Hexagonal Boron Nitride on H-DLC Film Surfaces in Dry Nitrogen
HUANGPENG, - Guizhou University (Institute of Technology), Tsinghua University
10:30 - 10:50Oral presentation
4EDW - Disordered Water Molecule Structure Enhances Interfacial Slip
PAN, T. - Tsinghua University
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 07
09:30 - 10:50
09:30 - 09:50Oral presentation
4E44 - Effect of laser shock peening on tribological performance of 15CrNiMo carburized layer in multi-body friction systems
WANG, Y. - Southwest Petroleum University
09:50 - 10:10Oral presentation
4EBB - Phosphate coatings for protection of steels surfaces
CROCKETT, R. - Swiss Federal Laboratories for Materials Science and Technology
10:10 - 10:30Oral presentation
4EBV - Thermal isolation effect of DLC coatings on steel substrates
KALIN, M. - University of Ljubljana
09:40
10:50
09:4010:50
OCEANIA IV
09:40 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 07
09:40 - 10:50
Chair: JAVIER BARRIGA
09:45 - 10:10Invited Speaker
4DTE - Simple Methods for Predicting Mixed and Boundary Friction
Ian Sherrington - University of Lancashire
10:10 - 10:30Oral presentation
4DZR - Multiscale Modelling of Rain Droplet Impact on Wind Turbine Blades
NAMBIAR, V. R. - Ghent University / Universiteit Gent
10:30 - 10:50Oral presentation
4E2K - The formation mechanism, diffusion behavior, properties of the material transfer layer on the rail surface during ultra-high speed sliding electrical contact
CHEN, Deshan - Central South University (Zhongnan University)
OCEANIA V
09:40 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 07
09:40 - 10:50
Chair: Mark Rutland (KTH) - Sweden
09:45 - 10:10Invited Speaker
4DQT - Lubrication in Charged Hydrogels: Hydration Lubrication vs. Electrostatics
Rosa M Espinosa-Marzal - University of Illinois Urbana Champaign
10:10 - 10:30Oral presentation
4E2Y - A Novel Biomimetic Strategy for Improving Lubrication Performances of UHMWPE Inspired by the Slippery gel Release Behavior of Chia Seeds
DONG, C. - Wuhan University of Technology
10:30 - 10:50Oral presentation
4EAH - Friction and Wear Behavior of Sustainable Microfibrillated Cellulose/Polylactic Acid Hybrid Coatings with Antiviral Activity
REN, K. - University of Birmingham
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
10:50
11:30
10:5011:30
America
10:50 - 11:30
Session
Poster Session 03
Poster Session 03
10:50 - 11:30
4DSC - Performance of SiC/YAG Coatings in Steam-Rich and Ash Environments
Franciele Dias de Castro - Universidade Federal de Pelotas Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4DVH - Tribological Insight into Aggregate Selection for Pavement Skid Resistance Using the Aggregate Hardness Parameter
KANE, M. - Gustave Eiffel University Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4E22 - Tribological Characterization of a Water-Based Lubricated Ball Bearing under an Electric Field
NAJJARI, R. - Loughbrough university Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EA6 - Electro-tribological and electrical properties of PAO based lubricants with ZDDP and CNT additives
FARFAN-CABRERA, L. I. - Tecnológico de Monterrey Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4ECZ - Thermophysical and Tribological Properties of Sustainable Lubricant Formulations Based on Synthetic Bases and Recycled Vegetable Oils
GUIMAREY, M. J. G. - Universidade de Santiago de Compostela Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EEF - From Tribological Loss Reduction to System-Level Energy Efficiency: Implications for Industrial Cogeneration Systems
SILVA, C. A. F. D. - Pontifícia Universidade Católica de Minas Gerais, Universidade Federal de Minas Gerais Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EFN - Sustainable superlubricity: a festival powered by nature
ZUBIETA-LABORDE, P.m - Centrale Lyon Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EGB - Tribologia verde promovendo a igualdade social, racial e de gênero nas áreas de Ciência, Tecnologia, Engenharia e Matemática (STEM).
MOREIRA, H. T. S. - Universidade Federal do Rio Grande Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EK4 - Wear and Fatigue Behavior of AM Stainless Steels Exposed to Hydrogen
PODGORNIK, B. - Institute of Metals and Technology Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EPG - Aqueous superlubricity of a SiC-coated stainless steel sliding against Si3N4
SILVA, J. V. R. S. E. - Universidade Federal do Espírito Santo Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4ETK - TriboGirls Project: Biofuels for a Sustainable World
GABRIEL, L. R. - Universidade Federal do Rio Grande do Norte Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EVE - Effect of Reduced Graphene Oxide nanoparticles on performance of Gearbox Lubrication Systems
SILVA, D. F. F. D. - Universidade Federal do Rio Grande do Norte Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EXH - Analysis of wear modes in gaseous hydrogen network valves
SOUZ FILHO, A. N. - Universidade de São Paulo Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EYD - Advanced Tribological Testing Machines at TEKNIKER
IGARTUA, A. - Fundación Tekniker Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EZ4 - SiToLub project – How tribology should contribute to the sustainability assessment
PAGANO, F. - Fundación Tekniker Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4EZP - Utilização de um pino triboacústico para monitorar a formação de tribofilmes em lubrificantes contaminados com etanol.
PIOVESAN, A. S. - Universidade Federal de Pelotas Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4F2G - Design and Application of a Novel Tribo-Electrochemical Cell for In-Situ Hydrogenation Studies
FAVARO, G. - Rtec-Instruments Inc. Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4F64 - Impact of Fretting on Electrical Steel Performance in Electrical Machines
VITTORINO, A. A. O. F. - Universidade Federal de Uberlândia Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4FA2 - Influence of seed origin on Moringa oleifera oil properties
ZAPPELINO CAMILLO, B. - Centro Universitário SENAI SC Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4FAD - Reciprocating sliding wear of carbon fiber reinforced PEEK
CAMPOREZ, R. M. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
OLIVEIRA, A. C. - Universidade Federal do Rio Grande Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4FAM - Divergencies in bio-lubrication: academic outputs versus IP abandonment ratios
HROMATKA, M. - Universidade Federal de Santa Catarina Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4FBW - FR202 – A new proprietary renewable Organic Friction Reducer
VERGA, S. - Eni S.p.A. Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4FDN - Unraveling Fretting Wear Mechanisms of AISI 52100 Steel in Electrified Vehicle Tribosystems
YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 02 - Sustainable Tribology - Green Tribology and Energy Transition
4DYB - Laser Cladding Effects on Abrasive Wear Resistance of Hardox 400 Steel
ULBRICH, D. - Poznan University of Technology Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4DZQ - Sand-Slurry Erosion of Corrosion-Resistant Alloys at a Shallow Impact Angle
DANTAS, N. V. - Universidade Federal do Espírito Santo Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4DZX - Abrasive and erosive wear caused by iron ore slurries with varied silica content on high chromium cast iron: influence of iron ore geology
BARBOSA, P. R. - Universidade Federal de Ouro Preto Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4E4K - Abrasiveness and Geology of Brazilian Iron Ores: Considerations Based on the Miller Abrasiveness Test
BARBOSA, P. R. - Universidade Federal de Ouro Preto Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4E6R - Surface Integrity in Micromilling of NiTinol for Medical Applications
LOPES, J. D. S. - Universidade Federal de Uberlândia Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EBP - Assessment of abrasive wear resistance of RAVUR250HR, SAE1045, and HSLA501 steels
MURARI, F. D. - USIMINAS Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EDF - Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions
BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EEC - Effect of Deformation-Induced Changes in Elasto-Plastic Properties on Galling Resistance of AISI 304 Stainless Steel
PRIETO, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EER - Bringing the Dead Zone to Life: In Situ Visualization of Interfacial Stagnation in Metal Cutting
MSAOUBI, R. - Lund University Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EFZ - Comparative Study of the Mechanical and Tribological Properties of Recycled and Conventional Filaments in 3D Printing
SOUZA, J. R. D. - Universidade Federal Rural do Semi Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EGX - Innovative Green Ingredients for Sustainable Automotive Brake Friction Materials
NOGUEIRA, A. P. G. - Brembo NV Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EH2 - Hardness and alumina content determine the Low-Stress Sliding Abrasion wear in commercial ceramics for transfer chute linings?
DIAS-BATISTA, L. - Instituto Tecnológico Vale Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EKJ - Comparison of Abrasive Wear in Conveyor Belt Splices Using Two Experimental Methods
ZINATO, N. L. - Universidade Federal de Ouro Preto Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EKN - Research on Image Algorithm for the Extraction of the Motion Trajectory of Bearing Cages
YAN,B. - Chang'an University Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EMK - Tribological Interaction in W–Cu Sintered Composites: Role of Cu Nanoflakes in W Particle Adhesion and Resistance to Particle Detachment
BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EN2 - Grinding Performance of a Structured Wheel with Internal Cooling Channels
SOARES, D. F. - Associate Laboratory, Center for MicroElectromechanical Systems Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EPC - Tribological Characterization of Bi-Functional Abrasive Composite
CAPELA, P. A. - University of Minho Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EQS - Sclerometry as a method to evaluate the grindability of HSS applied for tap tools
STREY, N. F. - Universidade Federal do Espírito Santo Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4ESQ - Investigating Bearing Surface Damage via Coupled Electro-Thermal Analysis
ESHRAGHI, H. - Flanders Make, Ghent University / Universiteit Gent Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EVP - Blickensderfer’s methodology in a field wear test to evaluate wear-resistant materials for transfer chute linings
PENAGOS, J. J. - Instituto Tecnológico Vale Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EVW - Abrasive wear of conveyor belt rubber materials used in an iron ore processing plant
SANTOS, Y. L. D. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EXD - Experimental approaches to system-level identification of tribological parameters in automotive friction torsional vibration dampers
FORMELA, M. T. - Eaton Mobility Group, Gdansk University of Technology / Politechnika Gdanska Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EYX - A CFD–DEM simulation study of abrasive wear in iron ores slurry controlvalves
LIMA, L. F. B. - Instituto Tecnológico Vale Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4EZT - Experimental and Numerical Analysis of the Influence of Surface Morphology on the Tribological Behavior and Contact Mechanics of Polyurethane Rail Pads
VICENTE, A. D. F. N. - Instituto Tecnológico Vale Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4FAR - Tool Wear Mechanisms when turning Ti-6Al-4V alloy
KWON, P. - San Diego State University Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4FAV - Influence of Surface Pre-Treatment on Wear Resistance of Patinas Formed on Weathering Steel under Atmospheric Exposure
LUZ, F. K. C. - Universidade Federal do Rio Grande Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4FAZ - Impact of grinding stone topography on rail surface integrity
BIAZON, L. - University of Sheffield Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
4FBV - A preliminary research of laser DED repairing and its mechanical properties aiming remanufacturing
TEI, Y. - Japan Advanced Institute of Science & Technology Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
11:30
12:30
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4E4G - Tribo-rheological and thermal characterization of vegetable oil in water microemulsions as a potential water-based fluid for metalworking applications
J. A. FRIAS-FLORES - Instituto Politécnico Nacional
11:50 - 12:10Oral presentation
4E4J - Tribomechanical Evaluation of FeCrNiMo Alloy Reinforced with WC Deposited by L-DED
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
12:10 - 12:30Oral presentation
4E4Q - Atomic material removal mechanism in ultra-precision chemical mechanical polishing of bearings and gears
Surface Metrology and Contact Mechanics - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4EXR - A Probabilistic Metrological Framework Linking Surface Topography Transition to Functional Tribological Performance
GRABON, W. A. - Rzeszow University of Technology
11:50 - 12:10Oral presentation
4EYF - Rare-earth-based luminescent sensors for tribological applications
DESCARTES, S. - Institut national des Science Appliquées de Lyon
OCEANIA I
11:30 - 12:30
Tribomechadynamics, Tribotests and Monitoring - Session 08
11:30 - 12:30
11:40 - 12:10Keynote Speaker
4EHR - Fretting wear prediction in aero-engine blades
BOTTO, D. - Politecnico di Torino
12:10 - 12:30Oral presentation
4EGH - The effect of fretting wear on the forced response of structures with contact interfaces: experimental versus numerical results
ZUCCA, S. - Politecnico di Torino
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4DYW - Ammonia Production via Mechanocatalysis: A Molecular Dynamics Study
RAHMAN, M. A. - Imperial College London
11:50 - 12:10Oral presentation
4DZC - Viability of lubricating greases using functionalized cellulose as thickeners
ROSS, J. D. - Imperial College London
12:10 - 12:30Oral presentation
4DZN - Improvement of Efficiency performance of transaxle fluids for electric vehicles
CAWICH, P. - Idemitsu Lubricants America Corp.
OCEANIA III
11:30 - 12:30
STLE - AI-STLE Artificial Inteligence for Smart Tribology and Lubrication Engineering - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4ESB - Artificial Intelligence for Image-Based Monitoring and Prediction of Cutting Tool Coating Wear
DIENWIEBEL, M. - Microtribology Centre
11:50 - 12:10Oral presentation
4EXC - Machine Learning-Based Feature Engineering for Mixed Friction Detection in Journal Bearings Using Acoustic Emission.
KLINGHART, B. - MSE - RWTH Aachen University
12:10 - 12:30Oral presentation
4EYZ - Advancing Lubricant Design with Machine-Learning-Informed Molecular Dynamics
RIGHI, M. C. - Università di Bologna
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 08
11:30 - 12:30
Chair: Nazanin Emami (LTU) - Sweden
11:30 - 11:50Oral presentation
4E4T - Preparation and Evaluation of Protective Coatings for Aeroengine Blade Tips
DUAN, D. - Institute of Metal Research, Chinese Academy of Sciences
11:50 - 12:10Oral presentation
4E6Y - Morphology-Regulated MoS2/MWCNTs Hybrids for Enhanced Tribological and Mechanical Performance of PEEK Composites under Harsh Environments
HUANG, S. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
12:10 - 12:30Oral presentation
4EAC - Erosion performance of AlSi-based abradable coating
SOUSA, N. D. O. - Concordia University Montreal
OCEANIA IX
11:30 - 12:30
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4EGA - Mo(VI) dithiocarbamate friction behavior in steel-steel contact under boundary lubrication
MINFRAY, C. - LTDS CNRS Ecole centrale de Lyon
11:50 - 12:10Oral presentation
4EGT - Effects of Methanol as an Alternative Fuel on Lubricated Interfaces in Maritime Transport
Xinhe Xiong - University of Leeds
12:10 - 12:30Oral presentation
4EGV - Stress-Dependent Tribofilm Formation of ZDP under Full-Film EHD Conditions: Comparison with ZDDP
WANG, C. C. - Imperial College London
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology - Session 08
11:30 - 12:30
Chair: Margarida M.L.D Santos (ICL) - United Kingdom (Great Britain)
11:30 - 11:50Oral presentation
4EAS - The study of quantitative friction-damage models at the interventional catheter-vascular tissues interface
LIN, C. - Wuhan University of Science and Technology
11:50 - 12:10Oral presentation
4EAT - Needle Insertion Induced Fracture and Friction in Biomimetic Soft Gels
MUTHUKUMAR MARIAPPAN - Acharya Institute of Technology
12:10 - 12:30Oral presentation
4EAW - Ti‑6Al‑4V/HAp/MXene surface architectures for low‑friction, osteointegrative biomaterials
TOMALA, A. M. - Cracow University of Technology
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 08
11:30 - 12:30
Chair: Q. Jane Wang (NORTHWESTERN) - United States
11:30 - 11:50Oral presentation
4EBW - Decoding Phosphate Tribofilm Behavior via Multiscale Characterization for Improved EV Performance
ARNOUX, Q. - TotalEnergies
11:50 - 12:10Oral presentation
4ECM - On Modeling Welding Polymer Process: A Molecular Dynamics Approach
DIOP, M. B. - Université de Strasbourg
OCEANIA VII
11:30 - 12:30
Nanoscale Mechanisms of Friction and Lubrication - Session 08
11:30 - 12:30
Chair: Lars Pastewka (UNI-FREIBURG) - Germany (Deutschland)
11:30 - 11:50Oral presentation
4EEP - EHD model with lubricant slip on slower and faster surface
POLAJNAR, M. - University of Ljubljana
11:50 - 12:10Oral presentation
4EFS - FrictionSim2D: A High-Throughput Molecular Simulation Framework to Screen the Friction Performance of Two-Dimensional Materials
VALDERRAMA, M. - Imperial College London
12:10 - 12:30Oral presentation
4EFV - Atomic-scale mechanisms behind macroscopic superlubricity in plain bearings: the case of glycerol-lubricated ta-C and Si3N4
REICHENBACH, T. - Fraunhofer Institute for Mechanics of Materials
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4ECC - Slurry erosive wear of DLC (a-C) coated alloys for oil and gas applications
OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
11:50 - 12:10Oral presentation
4ECE - Study on high temperature tribological properties of self lubricating coatings
CHENG, B. - Tsinghua University
12:10 - 12:30Oral presentation
4ECJ - Insights into the tribological and micro-impact behaviour of multilayer coatings based on TiN, CrN, ZrN, TiCrN and TiZrN
TOBOŁA, D. - Łukasiewicz Research Network – Krakow Institute of Technology
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
14:00
14:40
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
Chair: Hong Liang
4FCN - The mechanics of contact between rough surfaces
PASTEWKA, L. - Universität Freiburg
14:40
16:00
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 09
14:40 - 16:00
14:40 - 15:00Oral presentation
4E62 - Effect of heat treatment on the tribocorrosion behavior of 20Cr13 martensitic stainless steel
JIANG, S.L. - Institute of Metal Research, Chinese Academy of Sceinecs
15:00 - 15:20Oral presentation
4E64 - Tribocorrosive wear behavior of grinding media in Miller Test
GUIMARÃES, M.L.S.S. - Universidade Federal de Ouro Preto
15:20 - 15:40Oral presentation
4E6G - Analyses of the coupling between thermomechanical and tribological processes during a railway braking test
CRISTOL, A.-L. - Centrale Lille
15:40 - 16:00Oral presentation
4E6N - Investigation of the Influence of Stress Relaxation Behavior on Radial Stress in Nonwoven Fabric Winding Processes.
NISHIOKA, S. - Tokai University
OCEANIA-VIII
14:40 - 16:00
Tribo-Induced Surface and Sub-Surface Transformations - Session 01
14:40 - 16:00
14:50 - 15:20Keynote Speaker
4EAF - The fascinating interplay between crystallography and subsurface microstructure evolution
GREINER, C. - Karlsruhe Institute of Technology
15:20 - 15:40Oral presentation
4DM6 - Thermal Damage on Rolling/Sliding Contact Surfaces as Produced byEmbedded Particles
Guillermo E. Morales-Espejel - SKF Research and Technology Development
15:40 - 16:00Oral presentation
4DMY - Tribological Behaviour of PEEK Composites Reinforced with Alumina Particles: Influence of Particle Size and Content
Karl Delbé - Université de Technologie de Tarbes
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 09
14:40 - 16:00
14:50 - 15:20Invited Speaker
4ENX - COMBINED STRATEGIES FOR THE COMPUTATIONALLY TRACTABLE MATCHING OF TURBINE BLADES WITH DRY-FRICTION UNDERPLATFORM DAMPERS
GOLA, Muzio - Politecnico di Torino
15:20 - 15:40Oral presentation
4EEV - Interface dynamic evolution of solids under dry frictional contact and correlation with macroscopic tribological response
CATTAI, M. - Università degli Studi di Roma La Sapienza
15:40 - 16:00Oral presentation
4EGS - Tribo-Mechanical Effects of Geometry and Surface Finish in Underplatform Dampers
BERRUTI, T. - Politecnico di Torino
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 09
14:40 - 16:00
14:40 - 15:00Oral presentation
4E2T - Aqueous Lubrication for EV Powertrains: A Multi-Scale Investigation of Tribofilm Formation Under Electrified Conditions
PUHAN, D. - University of Sheffield
15:00 - 15:20Oral presentation
4E2X - Large-scale damage healing in a stiff, self-lubricating epoxy composite
WU, X. - Tsinghua University
15:20 - 15:40Oral presentation
4EE2 - Lubricant Inerting - Enhancing Sustainability of Lubrication Systems
WONG, J. S. - Imperial College London
15:40 - 16:00Oral presentation
4EBJ - Thermo-oxidative aging effects on the electrical and electro-tribological performance of e-fluids
Soto-Nieto, F - Tecnológico de Monterrey
OCEANIA IV
14:40 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 09
14:40 - 16:00
Chair: Qin Zhao (LICP, CAS) - China
14:40 - 15:00Oral presentation
4EAD - Exploring boron nitride nanotubes as reinforcement to Co-TiC sintered composites at high-tempreature wear against Si3N4 ball counterpart
Tisov, O. - Xi'An Jiaotong University
15:00 - 15:20Oral presentation
4EB2 - Reducing the humidity dependence of friction and wear of graphite-based solid lubricant coatings
DIENWIEBEL, M. - Microtribology Centre
15:20 - 15:40Oral presentation
4EDG - Exploration of Adaptive Tribological Surfaces for Aerospace Applications with In-situ Raman Analysis
VOEVODIN, A. A. - University of North Texas
15:40 - 16:00Oral presentation
4EDH - Tribological Performance Evaluation of Electroplated Copper Coatings for Aerospace Journal Bearing Applications
KARMAKER, H. - Concordia University
OCEANIA IX
14:40 - 16:00
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 09
14:40 - 16:00
14:40 - 15:00Oral presentation
4EGZ - Optical Observation of Boundary-Activated MoS2 Tribofilm for the Sustainability of Liquid Superlubricity of PEG
DANĚK, L. - Brno University of Technology
15:00 - 15:20Oral presentation
4EHW - 2D MXenes: Tunable Mechanical and Tribological Properties
ROSENKRANZ, A. - University of Chile
15:20 - 15:40Oral presentation
4EJC - Effect of Graphene Reinforcement on the Tribological Behavior and Mechanical Properties of Si₃N₄ Nanocomposites
DE BARROS BOUCHET, M. I. - Centrale Lyon
15:40 - 16:00Oral presentation
4EJS - Experimental strategy to study the effect of environment on MoDTC friction reduction capabilities
MINFRAY, C. - LTDS CNRS Ecole centrale de Lyon
OCEANIA V
14:40 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 09
14:40 - 16:00
Chair: Urban Wiklund (UU) - Sweden
14:40 - 15:00Oral presentation
4EAX - Tribocorrosion Behaviour of Additively Manufactured Ti6Al4V with Targeted Surface Structures under Synovial Fluid Degradation
ODEHNAL, L. - Brno University of Technology
15:00 - 15:20Oral presentation
4EBN - Response of PVA Hydrogels in the Boundary Lubrication Regime after Loss of Fluid Pressurization
NEMECEK, D. - Brno University of Technology
15:20 - 15:40Oral presentation
4ECG - Modified pHEMA hydrogels as cartilage biomimetic materials
REBENDA, D. - Brno University of Technology
15:40 - 16:00Oral presentation
4ECK - Ensuring Adhesion to a Wet Interface: the case of a Mushroom Shaped Microstructure
NASCA, L. - Politecnico di Bari
OCEANIA VI
14:40 - 16:00
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 09
14:40 - 16:00
Chair: Andreas Almqvist (LTU) - Sweden
14:40 - 15:00Oral presentation
4E6H - Constructing the continuum-physics core of a digital twin for tribological contacts under boundary and mixed lubrication conditions
MOSELER, M. - Fraunhofer Institute for Mechanics of Materials
15:00 - 15:20Oral presentation
4E6Z - Very high cycle fatigue of high strength steels applied to aeronautic rolling bearings
BEHLAL, H. - Institut national des Science Appliquées de Lyon
15:20 - 15:40Oral presentation
4EAQ - Maintaining Joint Lubrication: A FSI Coupled Model of Cartilage Mechanics
ASHIK, A. K. - Imperial College London
15:40 - 16:00Oral presentation
4EBH - Semi-analytical modeling of sprag clutches quasi-static behavior
DUMET, T. - Laboratoire de Mécanique des Contacts et des Structures
OCEANIA VII
14:40 - 16:00
Nanoscale Mechanisms of Friction and Lubrication - Session 09
14:40 - 16:00
Chair: Philip Egberts (UCALGARY) - Canada
14:55 - 15:20Invited Speaker
4EPY - Strain‑Mediated Topography–Chemistry Coupling in Atomic‑Scale Friction: Insights from Graphene Step Edges
KIM, S. H. - Pennsylvania State University
15:20 - 15:40Oral presentation
4EHX - Competing Cavitation and Chain Scission Drive Delayed Fracture in Viscoelastic Solids
PENG, Y. - Nanjing University of Science & Technology
15:40 - 16:00Oral presentation
4EJA - Concentration-Driven Conformational Transitions in Adsorbed Polymer Films Govern Tribological Behavior
SONG, Y. - Nagoya University
OCEANIA X
14:40 - 16:00
Surface Engineering - Session 09
14:40 - 16:00
14:40 - 15:00Oral presentation
4ECR - Surface Integrity Based on Total Surface Roughness (Rt) as a Tribological Indicator in the Machining of Aluminum Alloy Wheels
SOUSA, J. A. G. - Universidade Tecnológica Federal do Paraná
15:00 - 15:20Oral presentation
4ECW - Influence of Surface Slip on Hydrofoil Drag and Flow Noise Characteristics
ZHU, M. - Tsinghua University
15:20 - 15:40Oral presentation
4ED6 - Boride-based solid lubricants for extreme environments
PÖLZLBERGER, D. - TU Wien
15:40 - 16:00Oral presentation
4EDT - High-Performance Flexible Electronics Fabricated Using a Surface Energy-Directed Assembly Process on Ultrathin Polyimide Substrates
LI, Z. - Tsinghua University
16:00
16:40
16:0016:40
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:00
16:40
16:0016:40
America
16:00 - 16:40
Session
Poster Session 04
Poster Session 04
16:00 - 16:40
4DQA - From Lab to Aerospace Engine Application: A Cost-Effective Approach to Fast-Tracking Abradable Material Qualification
Kaue Bertuol - Concordia University Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DQK - Component-level wear and friction investigation of polymer packing seals exposed to Lunar and Martian regolith simulants
Ádám Kalácska - Ghent University / Universiteit Gent Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DRE - Wear-corrosion resistance of aluminum alloy MAO coating by 3D-printing textured PPUA coatings
Gai Zhao - Nanjing University of Aeronautics & Astronautics Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DXB - Effects of Drilling Parameters on Thermal and Tribological Behavior of Self-Lubricating Impregnated Diamond Bits for Lunar Dry Drilling
GUAN, C. - China University of Geosciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DXR - Biomimetic “soft-hard-soft” gradient interface engineering: multi-stage structural synergies and dual-layer tribofilm modulation for enhanced tribological properties of CF/PTFE composites
YANG M - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DXZ - Vat photopolymerization 3D printable self-lubricating polyimide
WANG, X. - Lanzhou Institute of Chemical Physics Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E2B - Lubrication materials for advanced nuclear reactors
WANG, P. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E2F - Synergistic Lubrication and Wear Mechanisms of WS2/CaF2 Reinforced lmpregnated Diamond Bit Matrix for Lunar Dry Drilling under High-Temperature Vacuum Conditions
TAN, S. - China University of Geosciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E2S - Study on Regulation of Superlubricity Performance of Hydrogenated Amorphous Carbon-based Films by Trace Doping
ZHANG, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E4N - High temperature lubricity and mechanism of novel glass lubricant
WANG, L. - Northwestern Polytechnical University Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E6K - Design of an Experimental Setup for Quantifying High-Velocity Droplet Impact Forces
POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EAB - Abrasive Wear of High Density Polyethylene for Offshore Applications
Sales de Oliveira, K. - University of Brasilia Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EAV - Evolution of Friction and Wear Mechanisms of Aerospace sealing Rubber under Thermal–Oxidative Aging
WU, J. - Harbin Institute of Technology, Harbin Institute of Technology at Weihai Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EBQ - Solid Particle Erosion of Plasma-nitrided DLC-coated Superduplex 2507 Stainless Steel and Inconel 718
BRAGANÇA, B. C. - Universidade Federal do Espírito Santo Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EMW - Design of Novel Grease-Based Ultralow Friction and Wear Systems and Their Study in Space Lubrication
Zhang. L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4ENB - Regulation of High-Temperature Adhesion and Static Friction Behaviors of Superalloys via Surface Topography Control
ZOU, Yuhui - Tsinghua University Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EPD - Scratch Adhesion Resistance of DLC Coatings on 2507 Superduplex Stainless Steel and Inconel 718 by PVD and PECVD
SOUSA, F. G. M. - Universidade Federal do Espírito Santo Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4ESW - Engineered Surfaces and Functional Additives for Extreme-Condition and Sustainable Tribological Applications: A Review
KATIYAR, J. K. - Manipal Institute of Technology, Manipal Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EYB - Friction and Wear Performance of SAE 1070 Steel in Air and Seawater for Flexible Riser Applications
VIEIRA, L. - Instituto Tecnológico de Aeronáutica Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4FBB - Tribological Properties and Space Environment Effects of Metal dichalcogenide Lubricating Films
WANG, D. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DVA - A simplified test protocol and data processing to investigate impact-sliding wear in PWR environment
DELLI COLLI, M. - Framatome Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4DYF - Correlating Vibration Analysis to the Development of Gear Pitting
MAELE, D. V. - Flanders Make, Ghent University / Universiteit Gent Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4DYN - Exploring the relationship between powder tribology and aerodynamic performance of DPI formulations
ROCHA, H. V. A. - Fundação Oswaldo Cruz Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4E6J - Design and Validation of a Small-Scale Tribological Rig for Segmented Carbon Seal Materials
DIMBARRE, V. V. - Concordia University Montreal Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4E6M - Practical considerations for employing Vision Systems in Gear Monitoring
POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4EBD - Electrifying tribometry for lubricant developments used in electrified drive technologies
KHOSLA, T. - Rtec Instruments Inc. Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4EJP - An Improved Local Method for the Dynamic Simulation and Accurate Prediction of Friction Torque in Deep Groove Ball Bearings
WEN, B. - Xi'An Jiaotong University Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4ERN - Tribological Monitoring Using an LR Sensor Applied to the Detection of Metallic Particles in Pure Mineral Oil
BEZERRA, E. M. - Universidade Estadual Paulista Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4ES6 - Continuous Measurement of Cage Wear in Cylindrical Roller Bearings
SUZUKI, D. - Railway Technical Research Institute Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4ESG - Tribology Driven Failure of a Stepless Hydraulic Capacity Control (HydroCOM®) System in a 3.4 MW Hydrogen Reciprocating Compressor
SAYED, S. N. - Numaligarh Refinery Limited Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4F6H - Effect of lubricant viscosity on a boundary lubrication test
SILVA, R. N. D. - Universidade Federal do Rio Grande do Sul Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4FCC - On-site in Situ and Operando Research on Real Contact Area of Friction
AIJIEXU, - SINOPEC Research Institute of Petroleum Processing Co., Ltd., Beijing 100083, P. R. China Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4DXE - Micro-abrasive Wear in PTFE and PTFE Composites for Ball Valve Seats
TELES, D. B. - Universidade de Caxias do Sul Track: 12 - Tribomechadynamics, Tribotests and Monitoring
4F4H - Ball cratering evaluation of epoxy and ECTFE coatings on carbon steel under abrasive conditions
TELES, D. B. - Universidade de Caxias do Sul Track: 12 - Tribomechadynamics, Tribotests and Monitoring
16:40
18:00
16:4018:00
OCEANIA IV
16:40 - 18:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 10
16:40 - 18:00
Chair: Amir Kadiric (IMPERIAL COLLEGE) - United Kingdom (Great Britain)
16:40 - 17:00Oral presentation
4EEA - Contact pressure tribological effect on Bi2S3-MoS2 soft coatings
ROMERO PIETRAFESA, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
17:00 - 17:20Oral presentation
4EEW - Flow Transport and Film Evolution of Lubricant on a Rotating Disk Across a Broad Temperature Region
WEI, C. - Beijing Institute of Technology
17:20 - 17:40Oral presentation
4EJY - Effect of Sodium Sulfate on Wear of Stainless Steel in High-Temperature and High-Pressure Water-Containing Ethanol Environment
KAWAI, H. - Nagoya University
17:40 - 18:00Oral presentation
4EKP - Dynamics of Cage-free Ball Bearings under acceleration condition
CAO, W. - Sichuan University
16:40
18:20
16:4018:20
EUROPA III-IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 10
16:40 - 18:20
16:40 - 17:00Oral presentation
4EAZ - Atomic-scale Tribochemical Differences During Chemical Mechanical Polishing of Copper and Silicon in the Integrated Circuits Manufacturing
ZHANG, L. - Tsinghua University
17:00 - 17:20Oral presentation
4EBX - Tribological Behavior and Iron Ore Flow on UHMWPE Materials for Truck Body Liners
SILVA, K. F. C. - Instituto Tecnológico Vale
17:20 - 17:40Oral presentation
4EC2 - Improved high-temperature solid particle erosion resistance of Hadfield steel by boriding
Hernández-Peña, A. - Tecnológico de Monterrey
17:40 - 18:00Oral presentation
4ECX - The impact of spin on elastohydrodynamic contacts for traction: A Theoretical and Experimental Investigation of Ball-Disc Contact
CUPERTINO, C. - Politecnico di Bari
18:00 - 18:20Oral presentation
4EDX - Flexible, transparent and conductive silver line electrodes fabricated using surface energy-directed assembly process on polyethylene naphthalate substrates
WANG, Y. - Tsinghua University
OCEANIA II
16:40 - 18:20
Sustainable Tribology - Green Tribology and Energy Transition - Session 10
16:40 - 18:20
16:40 - 17:00Oral presentation
4E4A - Lubricant inerting – base oil degradation in low oxygen atmosphere
FERREIRA, L. M. - Imperial College London
17:00 - 17:20Oral presentation
4ECQ - Effect of hydrogen on the tribological properties of CoCrFeMnNi HEA
AYERDI, A. - Universidad de Mondragon Mondragon Unibertsitatea
17:20 - 17:40Oral presentation
4EDC - Impact of Methanol Combustion on Piston Assembly Friction: A Combined Simulation and Experimental Study
RAGIMOV, Y. - MSE - RWTH Aachen University
17:40 - 18:00Oral presentation
4EDE - Electrical Properties of Tribofilms formed at Electrified Interfaces
KIM, S. H. - Pennsylvania State University
18:00 - 18:20Oral presentation
4EDR - On the effect of hydrogen absorption on wear behavior of steel 42CrMo4 in different microstructural states
David Diaz - Universität Duisburg Essen
OCEANIA V
16:40 - 18:20
Biotribology, Biomimetics and Food Tribology
16:40 - 18:20
Chair: Agnieszka Maria TOMALA (PK) - Poland
16:40 - 17:00Oral presentation
4ED2 - Do MXenes miss their MAX phases? Study on surface adhesion and interaction of Ti3C2Tx MXenes on porous and laser textured substrates
Göçerler, H - Technische Universität Wien
17:00 - 17:20Oral presentation
4ED4 - Synergistic Lubrication and Antibacterial Efficacy in Microgel-Reinforced Hydrogel Coatings
XU, D. - Beihang University (Beijing University of Aeronautics and Astronautics)
17:20 - 17:40Oral presentation
4EDM - Solid lubrication in an insect joint: a comprehensive experimental and numerical investigation
PUTIGNANO, C. - Politecnico di Bari
17:40 - 18:00Oral presentation
4EES - MXene-Reinforced CoCrMo Composites for Advanced Biotribological Applications
NECAS, D. - Brno University of Technology
18:00 - 18:20Oral presentation
4EFB - Active control of finger sliding friction with different surface roughness in SDS solutions for underwater surface haptics
ZHOU, X. - Sichuan University
OCEANIA VII
16:40 - 18:20
Nanoscale Mechanisms of Friction and Lubrication - Session 10
16:40 - 18:20
Chair: Pierluigi Bilotto (TU WIEN) - Austria
16:40 - 17:00Oral presentation
4EPF - Modelling Hair Friction in the Presence of Additives
CERQUEIRA DIAZ, P. M. - Imperial College London
17:00 - 17:20Oral presentation
4ERQ - Compatibility of 2D MoSe₂ and WSe₂ Nanoparticles with Oil Compositions: Impact on Wear Reduction
GRINKEVYCH, K. - I.M. Frantsevich Institute for Problems of Materials Science
17:20 - 17:40Oral presentation
4ETM - Adhesive contact mechanics via a self-consistent body-force formulation
M S Bobji - Indian Institute of Science, Bengaluru
17:40 - 18:00Oral presentation
4EVY - Enhancement of DLC Tribology Using Graphene and Nanodiamond under Solid and Water-Lubricated Conditions
HIRATA. Y - Institute of Science Tokyo
18:00 - 18:20Oral presentation
4F2H - Surface Tension Effect in Nano-Indentation of Soft Materials (Submission for the poster session only)
NOEL, - Université du Maine le Mans Laval
OCEANIA X
16:40 - 18:20
Surface Engineering - Session 10
16:40 - 18:20
16:40 - 17:00Oral presentation
4EEN - Lubricant film thickness for EHD contacts with diamond-like carbon coatings
POLAJNAR, M. - University of Ljubljana
17:00 - 17:20Oral presentation
4EEZ - Understanding the color variation of TiO2 thin layers by analyzing wear mechanisms of the oxide layer
FRIDRICI, V. - Centrale Lyon
17:20 - 17:40Oral presentation
4EG6 - Optimization of Tribological Properties Based on the Example of Two-Component Surface Layer
SEP, J. - Rzeszow University of Technology
17:40 - 18:00Oral presentation
4EKT - Influence of surface texture edge angle on tribological performance of laser textured tools in sheet metal forming
GUINEA, A. - Universidad de Mondragon Mondragon Unibertsitatea
18:00 - 18:20Oral presentation
4EBC - Dwell-time friction behavior of MoS2
DELRIO, F.W. - Sandia National Laboratories
16:40
18:40
16:4018:40
OCEANIA-VIII
16:40 - 18:40
Tribo-Induced Surface and Sub-Surface Transformations - Session 02
16:40 - 18:40
16:40 - 17:00Oral presentation
4DN6 - Elastoplastic finite element modeling of wheel–rail cyclic frictional rolling–sliding contact at insulated rail joints in high-speed railway
Zhijun Zhou - Southwest Jiaotong University
17:00 - 17:20Oral presentation
4DPF - Prognosis of Wiping Damage in Plain Bearings
4DRB - Mechanism of the Shear-Induced Formation of Metastable Copper Sulfide Tribofilms
Wilfred T Tysoe - University of Wisconsin-Milwaukee
18:00 - 18:20Oral presentation
4DTQ - Residual Stress and Topography Effects on Rolling Contact Fatigue Behavior
GOMES, G. M. D. O. - Instituto Tecnológico de Aeronáutica
18:20 - 18:40Oral presentation
4F4T - High-temperature (300 °C) Sliding Wear Behavior of Nanostructured High-Strength Steel: Effect of Heat Treatment Mode
IEFREMENKO, V. - Institute of Materials Research, Slovak Academy of Science
OCEANIA I
16:40 - 18:40
Tribomechadynamics, Tribotests and Monitoring - Session 10
16:40 - 18:40
16:40 - 17:00Oral presentation
4DNF - A multiscale dynamic analysis method for jointed structures: from surface topography to nonlinear dynamic response
XU, C. - Northwestern Polytechnical University
17:00 - 17:20Oral presentation
4DSW - Simulation and Experimental Validation of Bearing Creep simulation considering change of COF
Loc Duc Le - Technische Universität Chemnitz
17:20 - 17:40Oral presentation
4DWC - A Reduced-Order Disc Brake Surrogate with Rate-Dependent Hysteretic Friction Producing Stick–Slip
KANCHWALA, H. - Indian Institute of Technology Delhi
17:40 - 18:00Oral presentation
4DWG - The influence of size and Poisson's ratio on the stiffness of quasi conformal spherical contacts
CIULLI, E. - Università di Pisa
18:00 - 18:20Oral presentation
4EXJ - Impact of blade root joints on the dynamics of intrinsically mistuned bladed disks
Usmanov, U. - Politecnico di Torino
18:20 - 18:40Oral presentation
4EJE - Complete Stribeck Curve Prediction by Applying Machine Learning to Acoustic Emission Data from a Lubricated Sliding Contact
YANG, S. - Imperial College London
OCEANIA IX
16:40 - 18:40
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 10
16:40 - 18:40
16:40 - 17:00Oral presentation
4EJV - Molecular Simulations to Screen Additives for Future Fuels and Lubricants
PUREWAL, J. S. - Imperial College London
17:00 - 17:20Oral presentation
4EJX - The Stick-Slip to Superlubricity Transition: Atomic-Scale Evidence of Graphene Oxide Tribofilm on Nitride Ceramics
TANG, H. - Tsinghua University, University of Science & Technology Beijing
17:20 - 17:40Oral presentation
4EKM - Bubble Mechanisms in Antifoam Containing Oils
REDDYHOFF, T. - Imperial College London
17:40 - 18:00Oral presentation
4EMV - Tribological Performance of MWCNT Nanolubricants for Electric Vehicle Transmissions
ARAÚJO, L. C. D. - Universidade Federal do Rio Grande do Norte
18:00 - 18:20Oral presentation
4ENG - Tribological Performance of Water-Based Lubricants at High Speeds
FONG, W. - Imperial College London
18:20 - 18:40Oral presentation
4E4V - Macro-Superlubricity on Steel under High Sliding and Contact Pressure
LI, H. - Shanghai Advanced Research Institute, Chinese Academy of Sciences
OCEANIA VI
16:40 - 18:40
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 10
16:40 - 18:40
Chair: Michael Moseler (UNI-FREIBURG) - Germany (Deutschland)
16:40 - 17:00Oral presentation
4EDQ - Fluid leakage in seals: An experimental and numerical analysis
PUTIGNANO, C. - Politecnico di Bari
17:00 - 17:20Oral presentation
4EGD - Measurement-resolution bias in post-grinding rail RCF simulations
ALMQVIST, A. - Lulea University of Technology / Luleå tekniska universitet
17:40 - 18:00Oral presentation
4F6B - Friction dynamics in the presence of a third body - Application to earthquakes
MOLLON, Guilhem - Institut national des Science Appliquées de Lyon
18:00 - 18:20Oral presentation
4F6R - Programmable Torque Transmission Using Inflatable Interlocking Metainterfaces
ROGKAS, N. - National Technical University of Athens
19:30
22:30
19:3022:30
19:30 - 22:30
19:30 - 22:30
GD - Gala Dinner
08:30
09:30
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
Chair: Cristiano Binder
4FCE - Tribology for Sustainable Development
Umehara N - Nagoya University
09:30
10:30
09:3010:30
OCEANIA I
09:30 - 10:30
Tribomechadynamics, Tribotests and Monitoring - Session 11
09:30 - 10:30
09:40 - 10:10Keynote Speaker
4FC6 - Turning the Tribo-system into a Tribo-Test
SHAFFER, S. - Shaffer Tribology Consulting formerly Bruker Nanosurfaces and Battelle Memorial Institute
10:10 - 10:30Oral presentation
4EZ2 - Influence of the dynamic characteristics of the tribometer on the reliability of the results
RAMALHO, A. - Universidade de Coimbra
09:30
10:50
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 11
09:30 - 10:50
09:30 - 09:50Oral presentation
4EEJ - Elastohydrodynamic lubrication friction dependence on energy density and build orientation for SLM printed AlSi10Mg and 18Ni300
KLANJSCEK, U. - University of Ljubljana
09:50 - 10:10Oral presentation
4EEX - Development of a low-stress abrasive wear test to simulate mild wear conditions in commercial materials for transfer chute linings
Dias-Batista, L. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
10:10 - 10:30Oral presentation
4EEY - Insights on the wear behavior of rolling element bearings containing mixed-material contact interfaces
EVANS, R. D. - The Timken Company
10:30 - 10:50Oral presentation
4EFX - In-situ NbC-reinforced self-lubricating iron matrix composites via vacuumimpregnation
DESCHAMPS, I. S. - Universidade Federal de Santa Catarina
OCEANIA-VIII
09:30 - 10:50
Tribo-Induced Surface and Sub-Surface Transformations - Session 03
09:30 - 10:50
09:40 - 10:10Invited Speaker
4FCR - Invited talk - Raehee Han raeheehan@gnu.ac.kr
Raehee Han - Gyeongsang National University
10:10 - 10:30Oral presentation
4DTZ - Triboelectro-Degradation Mechanisms in Metallic Contacts
Hong Liang - Texas A&M University
10:30 - 10:50Oral presentation
4DVP - Influence of TiC Reinforcement Content on the Wear Mechanisms of SPS Processed Inconel 718 Composites
pierre gorez - Centrale Lyon
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 11
09:30 - 10:50
09:45 - 10:10Invited Speaker
4DNY - Development of hBN-Based Epoxy Nanocomposite Coating for Enhanced Wear and Corrosion Resistance
Jitendra Kumar Katiyar - Manipal Institute of Technology, Manipal
10:10 - 10:30Oral presentation
4EE4 - Investigate the effect of the hydrogen barrier coating on the hydrogen permeation rate into steel
LODHI, A. P. S. - University of Leeds
10:30 - 10:50Oral presentation
4ECP - Lubricant Inerting - Performance of antiwear additives in inert atmospheres
LUKIC, V. - Imperial College London
OCEANIA IV
09:30 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 11
09:30 - 10:50
Chair: Henara Lillian Costa (FURG) - Brazil
09:30 - 09:50Oral presentation
4EMY - High-temperature fretting wear behavior of established Tribaloys and a newly developed high-entropy alloy of reduced Cobalt content
WALZ, J. - German Aerospace Center
09:50 - 10:10Oral presentation
4EPN - Glazing of C263 Nickel Superalloy at Extreme Temperatures
HARRISON, J.P. - University of Sheffield
10:10 - 10:30Oral presentation
4EVD - Interfacial Tribofilm Evolution and Thermal–Tribological Enhancement of Nylon Rotating Bands via Graphene Oxide Coatings
Shuang Yi - Nanjing University of Science and Technology
10:30 - 10:50Oral presentation
4EWX - Influence of Hydrogen on the Tribological Behavior of Cast Iron Block/Piston Ring Contacts: First Insights
ARDILA, M. A. N. - Laboratorio de Tecnologia em Atrito e Desgaste
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 11
09:30 - 10:50
09:45 - 10:10Invited Speaker
4FDE - Invited talk - Profa. Maria Clelia Righi
RIGHI, M. C. - Università di Bologna
10:10 - 10:30Oral presentation
4EP6 - Neutron Imaging of Oil-Impregnated Sintered Gears for Self-Lubrication
LOHNER, T. - Technical University of Munich, Gear Research Center
10:30 - 10:50Oral presentation
4EPH - Nanostructured Tribolayers Enabling Heavy-Load Adaptive Superlubricity in Carbon-Based Solid Films
CHEN, X. - Tsinghua University
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 11
09:30 - 10:50
Chair: Ruibin XU (LICP, CAS) - China
09:40 - 10:10Invited Speaker
4FCW - Inivted talk - Prof. Tevis Jacob
JACOBS, T. - University of Pittsburgh
10:10 - 10:30Oral presentation
4EJ2 - Memory erasure in rough viscoelastic contact
LI, Z. - Sorbonne University
10:30 - 10:50Oral presentation
4EJB - Experimental Validation of the Heterogeneous Multiscale Methods for Modelling Laser Surface Textured Interfaces
Montgomery, J. - University of Leeds
OCEANIA VII
09:30 - 10:50
Nanoscale Mechanisms of Friction and Lubrication - Session 11
09:30 - 10:50
09:45 - 10:10Invited Speaker
4DNQ - Controlling Friction Properties of 2D Materials through Substrate/Surface Modification
Philip Egberts - University of Calgary
10:10 - 10:30Oral presentation
4EX2 - Shear-Driven Tribochemistry of MXenes at Sliding Interfaces
BHASKAR, V. - Indian Institute of Technology Delhi
10:30 - 10:50Oral presentation
4EYQ - Novel Materials for Solid Lubrication Based on High Entropy Alloy Disulfides
POLCAR, T. - Czech Technical University, University of Southampton
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 11
09:30 - 10:50
09:45 - 10:10Invited Speaker
4EEM - Design and Protection Strategies of Organic Coatings
Duan, H - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
10:10 - 10:30Oral presentation
4EKV - Comparative Tribological Study of W-S-(C) and DLC-Si-O Coatings for Mitigating Zinc Transfer in High-Stress Sliding Contacts
VUCHKOV, T. - Instituto Pedro Nunes
10:30 - 10:50Oral presentation
4EKW - Development and characterisation of highly ordered and aligned nanocomposite coating through anodization for tribological applications
S Ugar - Indian Institute of Science, Bengaluru
09:45
10:50
09:4510:50
OCEANIA V
09:45 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 11
09:45 - 10:50
Chair: W. Gregory Sawyer (MOFFITT) - United States
09:45 - 10:10Invited Speaker
4DZZ - Friction Effects on Human Tactile Perception of Textures
HIPWELL, M. C. - Texas A&M University
10:30 - 10:50Oral presentation
4EGQ - Multilamellar Vesicle Architecture: Linking Bilayer Stacking and Interlamellar Spacing to Membrane Mechanics
KAEEK, M. - Weizmann Institute of Science
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
10:50
11:30
10:5011:30
America
10:50 - 11:30
Session
Poster Session 05
Poster Session 05
10:50 - 11:30
4DRN - Metrological Reliability of In-Situ Penetration Depth in Scratch Testing of Biomedical Polymers: Effects of Device Compliance and Indenter Geometry
KAPPS, V. - National Institute of Metrology, Quality and Technology Track: 03 - Surface Metrology and Contact Mechanics
4DTN - New methodology to assess the slip-rolling fatigue resistance of materials and thin film coatings in an oscillating benchtop tribometer
KHOSLA, V. - Rtec Instruments Inc. Track: 03 - Surface Metrology and Contact Mechanics
4DTS - 3D Characterization of Leaf Surfaces for Particle Capture Analysis
Manuela Lopes Gennesseaux - Gustave Eiffel University Track: 03 - Surface Metrology and Contact Mechanics
4EBY - Analysis of skewness (Rsk) and kurtosis (Rku) parameters and diameter and cylindricity deviations in the dry drilling of Al-Mg-Si 6351-T6 alloy
BA, E. C. T. - Universidade Federal de Uberlândia Track: 03 - Surface Metrology and Contact Mechanics
4EC6 - AI-Assisted Metrology of Adhesive Wear in UHMWPE and Its Correlation with Friction
CHAVES, R. D. S. M. - National Institute of Metrology, Quality and Technology Track: 03 - Surface Metrology and Contact Mechanics
4ECF - 3BoImPro: 3rd Body Image Processing, an image processing tool dedicated to third body analysis in tribology
ALIZÉE, B. - Institut national des Science Appliquées de Lyon, Laboratoire de Mécanique des Contacts et des Structures Track: 03 - Surface Metrology and Contact Mechanics
4EFM - Spectral Analysis of Micromilled Surface Roughness
ALONSO, T. - Universidade Federal de Uberlândia Track: 03 - Surface Metrology and Contact Mechanics
4EJT - Scratch-Based Ranking of UHMWPE Grades and Its Relation to Viscoelastic and Cyclic Contact Response
KAPPS, V. - National Institute of Metrology, Quality and Technology Track: 03 - Surface Metrology and Contact Mechanics
4EJZ - Tribometrological Ranking of Dental Resin Composites After Simulated Clinical Polishing Based on Functional Roughness Parameters
Maru, M.M. - National Institute of Metrology, Quality and Technology Track: 03 - Surface Metrology and Contact Mechanics
4EKE - Surface Metrology as an Indirect Descriptor of Two-Body Abrasive Response in Steels and Gray Cast Iron under Standardized Manual Grinding
LEAL, D. V. F. - National Institute of Metrology, Quality and Technology Track: 03 - Surface Metrology and Contact Mechanics
4EPK - Tribological Evaluation of Skin–Textile Contact under Different Counterbody Geometries
J.G.Salinas-Cabrera - Instituto Politecnico Nacional Track: 03 - Surface Metrology and Contact Mechanics
4EVV - Surface Texture and Wear Behavior of a Zr-Modified AlSi5Cu2Mg Aluminum Alloy under Lubricated Sliding Conditions
MADEJ, M. - Kielce University of Technology Track: 03 - Surface Metrology and Contact Mechanics
4EWF - Surface integrity assessment of additively manufactured 316L after grinding
Oliveira, M. V. - Universidade Federal de Uberlândia Track: 03 - Surface Metrology and Contact Mechanics
4F22 - Nanoindentation of AC-HVAF-Sprayed IN625: Experimental Measurements and Numerical Modeling
GAMBOA, E. G. - CINVESTAV Track: 03 - Surface Metrology and Contact Mechanics
4F2B - Summit-counting method for statistical prediction of the coefficient of friction under mixed EHL conditions
FERNANDES, C. M. - Universidade do Porto Track: 03 - Surface Metrology and Contact Mechanics
4F6D - The Influence of Volume Conservation on the Stiffness of DC01 Steel Surfaces Under Large Deformations
OLIVEIRA, E. Y. G. - Universidade Federal de Pelotas Track: 03 - Surface Metrology and Contact Mechanics
4FBZ - An experimental approach for quantifying the mechanical strength of fretting-induced adhesion junctions
ZABIHI, A. - Tampere University Track: 03 - Surface Metrology and Contact Mechanics
4DQ4 - Influence of nitrogen doping to tribological response of MoS2 coating in humid environments: an in-situ Raman study
Yue Wang - Czech Technical University Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4DSM - Tailoring Tribological Performance through LPBF-Induced Porous Microstructures
Jonas Franke - Karlsruhe Institute of Technology Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4DVB - Mechanistic Insights into Friction Layer Formation During Burnish: A Multi-Modal Approach Using UMT TriboLab and Nanoindentation
MOHAMADOU, D. - Bruker Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4DVJ - Modeling the tribocorrosion phenomenon of additively manufactured materials
Dariusz Ulbrich - Poznan University of Technology Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4DZD - Effect of Lubricant Inerting on Micropitting Formation with PAO
MORLEY, J. - Phoenix Tribology Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4EHT - A Study on the Characteristics of Tribology in Type 304 Stainless Steel
HUR, J. - Changwon National University Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4EMN - Wear of Ravur-500 steel and residual stress under tribological conditions
BASTOS, I. N. - Universidade do Estado do Rio de Janeiro Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4ESJ - Determining the critical length scale related to wear in rubber materials
USHIODA, R. - Imperial College London Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4EW2 - Tribological Analysis of W-Ag Electrical Contacts Produced by High-Energy Milling for the Oil and Gas Sector
MOTA, Y. M. - Universidade Federal do Rio Grande do Norte Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4EWP - Low-velocity impact resistance of brittle nanoporous alumina layers
Revankar, G A - Indian Institute of Science, Bengaluru Track: 09 - Tribo-Induced Surface and Sub-Surface Transformations
4DYS - MXene/PVDF-Composites for Triboelectric Nanogenerators
Natarajan Gnanaseelan - Pontificia Universidad Católica de Chile Track: 11 - Triboelectric Nanogenerators for Energy and Sensors
4EGE - Super-Stretchable Ionic Conductor for Triboelectric Nanogenerator and Wearable Electronics
HU, W. - Beijing Institute of Nanoenergy and Nanosystems Track: 11 - Triboelectric Nanogenerators for Energy and Sensors
4EWQ - Sustainable WPU/TOCNF supramolecular materials based on dual dynamic cross-linking for self-powered sensing
LI, X. Z. - Xi’an Jiaotong University Track: 11 - Triboelectric Nanogenerators for Energy and Sensors
4F2P - New Generation of Battery Charging using Triboelectric Nanogenerators
PERDOMO, N. V. - Concordia University Montreal Track: 11 - Triboelectric Nanogenerators for Energy and Sensors
11:30
12:30
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 12
11:30 - 12:30
11:30 - 11:50Oral presentation
4EG2 - Microstructural and tribological investigation of niobium carbide-reinforced copper-free brake friction material produced by powder metallurgy
VIDAL, A. A. - Universidade Federal de Santa Catarina
11:50 - 12:10Oral presentation
4EGJ - Practical Experiences with the Service Life of Greases at High Temperatures
VALDAUF, J. - LUBRICANT s r.o.
12:10 - 12:30Oral presentation
4EGR - Putting boundary friction effects into cold strip rolling mixed lubrication models
MONTMITONNET, P. - MINES Paris, PSL University, Centre for material forming (CEMEF)
OCEANIA-VIII
11:30 - 12:30
Tribo-Induced Surface and Sub-Surface Transformations - Session 04
11:30 - 12:30
11:30 - 11:50Oral presentation
4DX2 - Consideration of surface degradation in powder-lubricated interfaces
ARGHIR, M. - Institut Pprime
11:50 - 12:10Oral presentation
4E2J - Quantitative evolution of tribo-layers in copper based friction materials for high-speed trains operating at 400 km/h equivalent energy density: Ratio of formation to damage
XU, Yuxuan - Central South University (Zhongnan University)
12:10 - 12:30Oral presentation
4E4S - Deformation and damage mechanisms in architectured MAX phase reinforced Ti-based coatings fabricated by laser direct deposition under dynamic impact and elevated-temperature fretting
HUA, K. - Northwestern Polytechnical University
OCEANIA I
11:30 - 12:30
Tribomechadynamics, Tribotests and Monitoring - Session 12
11:30 - 12:30
11:30 - 11:50Oral presentation
4F6V - A novel fretting rig for friction hysteresis and contact area measurements under high mechanical impacts
JAMAN, J. - Imperial College London
11:50 - 12:10Oral presentation
4E2M - Towards Reproducible Tribology: High-Replication Experiments and StatisticalEvaluation of Measurement Uncertainty and System Variability
ORGELDINGER, C. - University of Bayreuth
12:10 - 12:30Oral presentation
4F2T - A Novel Bearing Health Indicator Construction Method Based on Attention-Guided Frequency-Band Decomposition and Adversarial Adaptation
MEI, G. - Zhejiang University
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 12
11:30 - 12:30
11:30 - 11:50Oral presentation
4EE6 - Shear Velocity Dependent Stick-Slip Motion of Soft and Hard Solid Interfaces
KATIYAR, J. K. - Manipal Institute of Technology, Manipal
11:50 - 12:10Oral presentation
4EFD - Study on Groove Shape Design for Bearing Performance Improvement
Keisei Watanabe - Tokai University
12:10 - 12:30Oral presentation
4EFE - Research on Improving Friction Reduction in Journal Bearings— Study and Evaluation of a New Micro-Bubble Generation Method —
SAKABE, SHODAI - Tokai University
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 12
11:30 - 12:30
Chair: Alice MARINESCU (INSA LYON) - France
11:30 - 11:50Oral presentation
4EYA - Experimental investigation of wear behaviour and debris evacuation in an aerospace-grade material pair under high-temperature conditions
Marinescu A. - Institut national des Science Appliquées de Lyon
11:50 - 12:10Oral presentation
4EZ6 - Tribological behavior of a a-C coated AISI 4340 under seawater lubricated conditions for Oil and Gas Injection Valves
FREIRE, A. D. - Universidade de São Paulo
OCEANIA IX
11:30 - 12:30
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 12
11:30 - 12:30
11:30 - 11:50Oral presentation
4EPX - Effect of carbon nanomaterials on the structure and chemistry of ZDDP tribofilms
PRIETO, G. - Consejo Nacional de Investigaciones Científicas y Técnicas, Instituto de Fisica del Sur, Universidad Nacional del Sur
11:50 - 12:10Oral presentation
4EQN - Influence of Hydrodynamic Bearing Lubrication on Rotor Stability and Fluid-Induced Instabilities
SIMÕES, R. C. - Universidade Estadual de Campinas
12:10 - 12:30Oral presentation
4EQR - Rolling–Sliding Friction Behavior of a combination of Copper Oleate and EP Additives in a Low-Viscosity Lubricant Compared with Commercial Oils
ARMENDARIZ-MOLINERO, B. - Fundación Tekniker
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology
11:30 - 12:30
Chair: Maria Kaeek
11:30 - 11:50Oral presentation
4EGW - Tribologically induced mechanisms of articular cartilage lubrication
CIPEK, P. - Brno University of Technology
11:50 - 12:10Oral presentation
4EGY - Influence of Mixed Mesh-Size Network on Friction in Hydrogel Contacts
MAUCHLINE, S. E. R. - University of Birmingham
12:10 - 12:30Oral presentation
4EHE - Rheometer- based tribology of Hemiarthroplasty Bearing Materials
FEDERL, D. J. - Austrian Institute of Technology
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 12
11:30 - 12:30
Chair: Tevis Jacobs (PITT) - United States
11:30 - 11:50Oral presentation
4EKK - Thin Film-Forming Mechanisms of Aqueous Lubricant in Elastohydrodynamic Lubrication
MAZUYER, D. - École Centrale de Lyon
11:50 - 12:10Oral presentation
4EMP - Contact mechanics of elastomer spheres under oblique landing: experimental and analytical study of velocity ratio effects
MILLE, A. - LTDS CNRS Ecole centrale de Lyon
12:10 - 12:30Oral presentation
4ENF - The best from each scale: a methodological framework for coupling dry third body models and contact mechanics
MOLLON, Guilhem - Institut national des Science Appliquées de Lyon
OCEANIA VII
11:30 - 12:30
Nanoscale Mechanisms of Friction and Lubrication - Session 12
11:30 - 12:30
Chair: Fabrice Dassenoy (EC-LYON) - France
11:30 - 11:50Oral presentation
4F2Y - Intermolecular forces of single MXene flakes prepared by interfacial deposition
BILOTTO, P. - Technische Universität Wien
11:50 - 12:10Oral presentation
4F4F - Influence and Regulation of Surface Forces and Lubrication by Nanoscale Surface Roughness
FENG, B. - Tsinghua University
12:10 - 12:30Oral presentation
4F6K - Fluid film effect on the motion of an externally excited loosely supported tubular structure
DELLI COLLI, M. - Framatome
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 12
11:30 - 12:30
11:30 - 11:50Oral presentation
4EMD - Effect of gas nitriding on tribological and fretting characteristics of 3D-printed Ti-6Al-4V alloy in simulated body fluid
LAVRYS, S. - Vytautas Magnus University
12:10 - 12:30Oral presentation
4EPV - Surface Topography effect on Compound Layer Thickness in Plasma-Nitrided Gray Cast Iron
AQUINO, B. B. D. - Universidade Federal de Santa Catarina
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
14:00
14:40
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
Chair: Tianmin Shao (TSINGHUA) - China
4FCP - Understanding and controlling superlubricity of solids
MA, T. - Tsinghua University
14:40
16:00
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 13
14:40 - 16:00
14:40 - 15:00Oral presentation
4EHC - Abrasive wear of Fe–SiC cermets processed by hot pressing and spark plasma sintering
Oropesa. Y - Universidad de Concepción
15:00 - 15:20Oral presentation
4EHP - A Universal Strategy for Uniform Patterning of Diverse Functional Materials via Controlled Marangoni Flow
WANG, G. - Tsinghua University
15:20 - 15:40Oral presentation
4EK6 - How Hybrid scCO₂-MQL Lubrication Controls Tribology and Surface Integrity in Ti-6Al-4V Machining
XU, N. - University of Leeds
15:40 - 16:00Oral presentation
4EKD - Experimental investigation of a hydrodynamic journal bearing operating under servere conditions
RAVAUD, L. - Institut Pprime
OCEANIA-VIII
14:40 - 16:00
Tribo-Induced Surface and Sub-Surface Transformations - Session 05
14:40 - 16:00
14:40 - 15:00Oral presentation
4E4W - Analysis of Wear Mechanisms and Microstructural Modifications of Grease-Lubricated Thrust Ball Bearings under False Brinelling
JACQUES, R. - Centre Technique des Industries Mécaniques
15:00 - 15:20Oral presentation
4E6S - Wear resistance of boron-activated 316L steel: Comparing elemental Ti and TiB₂ additions
BAGNARA, N. S. - Universidade de Caxias do Sul
15:20 - 15:40Oral presentation
4EBE - The amorphization route of sp2 carbon during incremental load dry sliding tests
Araya, N. - Universidad de Concepción
15:40 - 16:00Oral presentation
4EBM - A Molecular Dynamics Study on Friction Induced Melting
WANG, Y. - Tsinghua University
OCEANIA I
14:40 - 16:00
Tribomechadynamics, Tribotests and Monitoring - Session 13
14:40 - 16:00
14:40 - 15:00Oral presentation
4DQQ - Unraveling Vibroadhesion: How Test Parameters Influence Vibration- Modulated Adhesion
Michele Tricarico - Politecnico di Bari
15:00 - 15:20Oral presentation
4DVZ - Effect of Material Pairing on Acoustic Emission Features During Dry Sliding
Lars Friedrich - Technische Universität Chemnitz
15:20 - 15:40Oral presentation
4EHA - High-speed optical imaging of dry metallic impacts for structural diagnostics
FANTETTI, A. - Imperial College London
15:40 - 16:00Oral presentation
4DX6 - Experimental evidence of dynamic stiction without static friction: Friction vector rotation creates intermittent slippage
NAKANO, K. - Yokohama National University
OCEANIA II
14:40 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 13
14:40 - 16:00
14:40 - 15:00Oral presentation
4EFY - Evolution of 100Cr6 and 316L planes against 100Cr6 balls behavior in hydrogen environment with a high pressure tribometer
PIEGARD, R. - Centre Technique des Industries Mécaniques
15:00 - 15:20Oral presentation
4EHH - Experimental and theoretical study of a multi-recess compliant hydrostatic thrust bearing
Marinescu A. - Institut national des Science Appliquées de Lyon
SAWYER, W. G. - Moffitt Cancer Center Track: 08 - Biotribology, Biomimetics & Food Tribology.
4DP4 - Challenges of materials selection and lubrication for hip prosthetic implants
Sujeet Kumar Sinha - Indian Institute of Technology Delhi Track: 08 - Biotribology, Biomimetics & Food Tribology.
4DQ2 - Bioinspired Micropatterned Scaffolds Fabricated via Two-Photon Polymerization for Retinal Cell Behavior Control
, M. T. - Politecnico di Bari Track: 08 - Biotribology, Biomimetics & Food Tribology.
4DWT - Study on Changes in Erythrocyte Properties and Their Effects on Blood Rheology
ZHANG, X. J. - Tsinghua University Track: 08 - Biotribology, Biomimetics & Food Tribology.
4DXG - Novel biomimetic synthetic injectable macromolecular materials for efficient lubrication treatment of osteoarthritis
ZHAO, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 08 - Biotribology, Biomimetics & Food Tribology.
4DZK - Evaluation of Bladeless Fan with Wavy Ledge Design for Noise Reduction and Efficiency
IBRAHIM, M. D. - Universiti Malaysia Sarawak Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EAJ - Influence of graphene oxide content on the coefficient of friction of a dental resin composite under reciprocating sliding
CUNHA, H. M. - Universidade Tecnológica Federal do Paraná Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EEB - A review on tribological aspects of PEEK coatings for orthopaedic implants
SANTOS, M. G. - Universidade Tecnológica Federal do Paraná Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EEE - Rheological and Soft Tribological Characterization of an Oat-Based Functional Food Enriched with Curcumin-Loaded Solid Lipid Nanoparticles
FAVALESSA, G. A. - Universidade Federal do Espírito Santo Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EFQ - Side-group-mediated friction of amphiphilic copolymer-doped hydrogels
ZHAO, P. - Weizmann Institute of Science Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EPT - Wear behavior of low elastic modulus Ti–Nb–Si alloys under simulated physiological conditions
CARVALHO, D. M. L. - Universidade Federal de Santa Catarina Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EV6 - The Effect of Simulated Gait on the Micromotion and Corrosion of Modular Tapers
BEADLING, A. R. - University of Birmingham Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EVS - Surface and Tribological Characteristics of TiN, CrN and ZrN Coatings on AISI 316L Stainless Steel for Medical Applications
MADEJ, M. - Kielce University of Technology Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EWM - Tribocorrosion-Resistant Nanosilica Coatings on Ti-6Al-4V Alloy for Biomedical Implants
ABBAS, B. - Indian Institute of Technology Delhi Track: 08 - Biotribology, Biomimetics & Food Tribology.
4EWN - Study on tribological properties of self-lubricating materials based on bionic micro-texture
ZHANG, X. Y. - Xi'An jiaotong University Track: 08 - Biotribology, Biomimetics & Food Tribology.
4FBD - Tribo-electrochemical Behaviour of Surface Treated SLM Ti6Al4V-ELI under Ringer’s Solution
PIERETTI, E. F. - Intituto de Pesquisas Energéticas e Nucleares Track: 08 - Biotribology, Biomimetics & Food Tribology.
4FBN - Epithelial Mechanics | Actin Reorganization Under Shear
SAWYER, W. G. - Moffitt Cancer Center Track: 08 - Biotribology, Biomimetics & Food Tribology.
4DN4 - Understanding the activation volume in mechanochemistry at frictional interface
Yang Wang - Southwest Jiaotong University Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4DPK - Simulation-Driven Insight into Wear Performance of Laser Powder Bed Fused 316L Stainless Steel
BARRIONUEVO, G. O. - Universidad San Francisco de Quito Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4DRA - Insight into Startup Lubrication of Tilting Pad Journal Bearings Using CFD
Samuel Cupillard - Hydro-Québec Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4DRY - EHL simulation considering the elastic deformation of rough surfaces caused by hydrodynamic pressure
Christopher Platis - Friedrich-Alexander-Universität Erlangen-Nürnberg Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4DSZ - Axial sealing in scroll expanders is studied using a pin-on-disc test bench. Measured leakage rates are compared to models coupling contact mechanics and gas flow. Results show good agreement and help identify the most suitable flow model.
TOURNIS Stéphane_ - Université de Poitiers Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4DZM - Air-lubricant thin film rotating flows: An image-based, homogenised interface modelling framework
ROGKAS, N. - National Technical University of Athens Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4E6C - On the Loading and Unloading Rough Elastoplastic Contact
CIAVARELLA, M. - Politecnico di Bari Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4EMQ - Friction-Induced Tribochemical Processes in Minimal Mixtures
FANG, C. - Technische Universität Braunschweig Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4ETW - Tribo-Mechanical Optimization of UNSM-Treated Inconel 718: Balancing Hardness, Roughness, and Oil Retention Capacity
CETINTAV, I. - Trakya University Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4EVN - Thermal contact indentation over multilayered elastic media with imperfect interfaces
VATTRÉ, A. - Office National d'Etudes et Recherches Aérospatiales Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4EVQ - General Optimization Method and Parameter Correlation Analysis of Herringbone-grooved Mechanical Face Seals Based on THD Lubrication Model
LI, Y. - Qingdao Agricultural University Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4F2D - Systematic Approach for Contact Mechanics-Based FEM Wear Simulation
RAMKUMAR, P. - Indian Institute of Technology Madras Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4F2F - Understanding wear behavior in metallic and composite materials
NOEL, - Université du Maine le Mans Laval Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4FBX - Frictional Transition of Viscoelastic Solids near Wave-Speed Sliding
IWASHITA, W. - National Institute of Advanced Industrial Science and Technology, The University of Osaka Track: 10 - Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology
4DRM - Predicting tribocorrosion behavior of stainless steels using Machine Learning
Kaouthar BOUGUERRA - Centre Technique des Industries Mécaniques Track: 13 - AI-STLE - Artificial Intelligence for Smart Tribology and Lubrication Engineering
4E4Z - Use of neural networks for the prediction of viscosity in extreme pressure andshear rate operating conditions
SANTOS, G. - Laboratoire de Mécanique des Contacts et des Structures Track: 13 - AI-STLE - Artificial Intelligence for Smart Tribology and Lubrication Engineering
4EHF - AI-driven prediction of scratch responses in carbide-reinforced martensitic steel
MACHADO, I. F. - Universidade de São Paulo Track: 13 - AI-STLE - Artificial Intelligence for Smart Tribology and Lubrication Engineering
4EXB - Properties of flowable composite materials used for dental fillings
DRABIK, S. - Kielce University of Technology Track: 08 - Biotribology, Biomimetics & Food Tribology.
16:40
18:20
16:4018:20
EUROPA III-IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 14
16:40 - 18:20
16:40 - 17:00Oral presentation
4EKS - Effect of Tempering Treatment on Microstructure and Mechanical Properties of D2 Tool Steel for Wear‑Intensive Applications
YARASU, V. - Institute of Metals and Technology
17:00 - 17:20Oral presentation
4EMF - A Surrogate-Based Sensitivity Analysis of Tyre-Pavement Tractive Contact
CARDOSO DA SILVA, D. - Université de Limoges
17:20 - 17:40Oral presentation
4ENM - Dry-Sliding Wear Resistance of AISI 410L Martensitic Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated Conditions
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
17:40 - 18:00Oral presentation
4ENQ - Friction Modification on Wet Rails: Adhesion, Wear and RCF
SKURKA, S. - Brno University of Technology
18:00 - 18:20Oral presentation
4EPB - Evaluation of Zinc Adhesion on Cast Iron Tool Materials
BASTOS, P. P. B. - Universidade Federal de Santa Catarina
OCEANIA II
16:40 - 18:20
Sustainable Tribology - Green Tribology and Energy Transition - Session 14
16:40 - 18:20
16:40 - 17:00Oral presentation
4EKA - Electro-Tribology and Electro-Rheology of Greases – Influence of Doping
PONDICHERRY, K. - Anton Paar GmbH
17:00 - 17:20Oral presentation
4EJ4 - Novel Polymeric Friction Modifier to Optimize Lubricity and Inorganic Additives Synergy
Pieter Struelens - Oleon NV
17:20 - 17:40Oral presentation
4EJJ - The effect of electric potentials on the initiation and progression of surface initiated rolling contact fatigue
WAINWRIGHT, B. - PCS Instruments Ltd
17:40 - 18:00Oral presentation
4EKB - Environmental and tribological assessment of cutting fluids produced from aminolyzed castor oil
FERREIRA, N. F. - Universidade Federal do Rio Grande do Sul
18:00 - 18:20Oral presentation
4EMT - Effect of Clearances on Bush Rotation Speed and Oil Film: X-ray CT Visualization in Floating Bush Bearings
Nattawat Nilamann - Tokai University
OCEANIA IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 18
16:40 - 18:20
16:40 - 17:00Oral presentation
4EVK - The impact of water and hydraulic oil contamination in cold rolling oil on the surface quality of stainless steels.
FARIA, G. S. - Aperam South America
17:00 - 17:20Oral presentation
4EWW - Beyond the Friction Coefficient: Creep Curves for Wheel–Rail Friction Assessment
GALAS, Radovan - Brno University of Technology
17:20 - 17:40Oral presentation
4EWY - Elastic Compression in Three-Body Line Contact: Reference-Point Selection
LIU, S. - Sichuan University
17:40 - 18:00Oral presentation
4EXM - The dominant role of carbide network architecture over chromium content in the scratch response of high-chromium cast irons grinding media
BORTOLETO, E. M. - Instituto Tecnológico Vale
18:00 - 18:20Oral presentation
4EXQ - Tribochemical Processing of Carbonates: Advancing Low Carbon and Sustainable Industrial Technologies
NEVSHUPA, R. - CSIC
OCEANIA V
16:40 - 18:20
Biotribology, Biomimetics and Food Tribology - Session 14
16:40 - 18:20
Chair: Xiangjun Zhang (THU) - China
16:40 - 17:00Oral presentation
4EKY - Acoustic Emission Associated with Stick–Slip in Human Skin–Surface Contact
CALIN, A. - NAtional University of Science and Technology POLITEHNICA Bucharest
17:00 - 17:20Oral presentation
4END - Laser-induced nanospikes on the tribological and antibacterial properties of titanium and bioceramics
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
17:20 - 17:40Oral presentation
4EMZ - Tribological behavior of micro-arc oxidation coatings containing Ag nanoparticles produced on titanium substrate
MAJ, Ł. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences
17:40 - 18:00Oral presentation
4EXA - Pressure-Driven Microstructural Evolution and Tribological Response of CoCrMo Orthopaedic Bearings
HYLA, E. - University of Birmingham
18:00 - 18:20Oral presentation
4EMC - Exotic Tribology of Soft Interfaces – Chocolates to Contact Lenses
PONDICHERRY, K. - Anton Paar GmbH
OCEANIA X
16:40 - 18:20
Surface Engineering - Session 14
16:40 - 18:20
17:00 - 17:20Oral presentation
4ERP - Effects of ultrasonic surface rolling processing on the surface properties of 4Cr13 stainless steel
Luo, X. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
17:20 - 17:40Oral presentation
4ERV - Tribological performance of single-step fs-laser-induced dual-scale surface structures on Ti6Al4V
ZABALA, A. - Universidad de Mondragon Mondragon Unibertsitatea
17:40 - 18:00Oral presentation
4ERW - Laser Surface Hardening of Grey Cast Iron Disc: Role of Scanning Speed and Laser Power in Wear Reduction
Manoj, A. - Birla Institute of Technology and Science Pilani Hyderabad Campus
18:00 - 18:20Oral presentation
4ESD - Enhanced High-Temperature Tribological Properties of Double Co-Doped DLC Coatings Prepared by FCVA
ZHANG, R. - Institute of Science Tokyo
16:40
18:40
16:4018:40
OCEANIA-VIII
16:40 - 18:40
Tribo-Induced Surface and Sub-Surface Transformations - Session 06
16:40 - 18:40
16:40 - 17:00Oral presentation
4EED - Dopant-Controlled Stabilization of ta-C under Current-Carrying Sliding
Amir M. K. Behtash - University of Windsor
17:00 - 17:20Oral presentation
4EHQ - Electrical Surface Damage Characteristics of Rolling Contacts Under Different Lubrication Regimes
POWERS, D. - University of Southampton
17:20 - 17:40Oral presentation
4EHY - Layer Thickness-Dependent Deformation and Damage Transitions in DLC/WC Multinanolayer Coatings
AGHABABAEI, R. - Aarhus University / Aarhus Universitet
17:40 - 18:00Oral presentation
4EM6 - Highly conductive and wear resistant ceramic-liquid metal composite
ZHAO, Jianxun - Tsinghua University
18:00 - 18:20Oral presentation
4ENS - Construction of heavy-load superlubricity based on the nanoclustering and ordering orientation of the tribo-products
DENG, W. - Tsinghua University
18:20 - 18:40Oral presentation
4FBG - Exceptional high-temperature wear resistance in CoCrFeMnNi high-entropy alloy composite via Al/Ti doping and hBN/TiC dual ceramic reinforcement
MA, W. - Xi'An jiaotong University
OCEANIA I
16:40 - 18:40
Tribomechadynamics, Tribotests and Monitoring - Session 14
16:40 - 18:40
16:40 - 17:00Oral presentation
4DVK - Experimental determination of evolution of the coefficient of friction andimplementation in a simulation routine
Denny Knabner - Technische Universität Chemnitz
17:00 - 17:20Oral presentation
4DVQ - Rotating tribometer at high temperature for understanding copper extrusion tool wear
GOREZ, P. - Centrale Lyon
17:20 - 17:40Oral presentation
4EHB - Friction monitoring during vibration using solitary waves
FANTETTI, A. - Imperial College London
17:40 - 18:00Oral presentation
4EPP - Galling behaviour of AZ80 magnesium alloy and H13 steel by using an adapted four-ball tester
E. A. GALLARDO-HERNÁNDEZ - Instituto Politecnico Nacional
18:00 - 18:20Oral presentation
4EZE - Frictional Instabilities in Elastomer Contacts
REDDYHOFF, T. - Imperial College London
18:20 - 18:40Oral presentation
4F2V - Micro Water Ingress in Bearings: Morphological evolution of the medium
GUO, J.D - Xi'An Jiaotong University
OCEANIA IX
16:40 - 18:40
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 14
16:40 - 18:40
16:40 - 17:00Oral presentation
4EXW - High-speed thermoelastohydrodynamic friction with entrained air
MACLAREN, A. - PCS Instruments Ltd
17:00 - 17:20Oral presentation
4EXZ - Role of hBN nanoparticles in PEG on boundary friction and lubrication in non-conformal contacts
ŠPERKA, P. - Brno University of Technology
17:20 - 17:40Oral presentation
4EY4 - Friction Performance of Bio-Oils Obtained by Different Cell Disruption Methods
VIEIRA, L. - Instituto Tecnológico de Aeronáutica, Universidade do Vale do Paraíba
17:40 - 18:00Oral presentation
4EYW - A Multi-Technique Experimental Framework for Assessing LubricantDriven White Etching Crack Formation in Rolling Bearing
BAHI, H. E. - TotalEnergies
18:00 - 18:20Oral presentation
4EYY - Elastohydrodynamic Film Thickness and Traction at High Speeds
VANISRI, N. - Imperial College London
18:20 - 18:40Oral presentation
4F4A - Tunable tribology properties of shape memory polymer
YANG, Z. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA VI
16:40 - 18:40
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 14
16:40 - 18:40
Chair: Lars Pastewka (UNI-FREIBURG) - Germany (Deutschland)
16:40 - 17:00Oral presentation
4ER2 - Design of Experiments Optimization NbC and Graphite in Sintered Ferrous Brake Pads
FRANÇOZO, A. D. O. - Universidade Federal de Santa Catarina
17:00 - 17:20Oral presentation
4ERA - Shear Orientation Observation of Grease Thickener Using Rheo-SALS and Its Modeling
CHUN, H. - Kyoto University
17:20 - 17:40Oral presentation
4ERC - How roughness-scale physics influence homogenization coefficient behavior in mixed lubrication
QUEIRÓZ, J. C. F. - Universidade de São Paulo
17:40 - 18:00Oral presentation
4ESV - Geometry- and Physics-Aware Modelling of Lubricated Interfaces
ARDAH, S. - Imperial College London
OCEANIA VII
16:40 - 18:40
Triboeletric Nanogenerators for Energy Sensors - Session 02
16:40 - 18:40
Chair: Daoai Wang (LICP, CAS) - China
16:50 - 17:20Invited Speaker
4DMW - Triboelectricity-driven green catalysis via contact electrification
Di Wei - Beijing Institue of Nanoenergy and Nanosystems
17:20 - 17:40Oral presentation
4DXN - Charge pumping strategy for high-performance mechanical energy harvesting: beyond triboelectric charges
XU, L. - Chinese Academy of Sciences
17:40 - 18:00Oral presentation
4DYC - Mutual Effects of Interfacial Charge Transfer and Light in Solid-Liquid Contact
ZHU, S. - Tsinghua University
18:00 - 18:20Oral presentation
4DZP - Time-dependent Behavior and Wear Resistance of DLC-coated Triboelectric Nanogenerators
HILGERT, A. - University of Bayreuth
18:20 - 18:40Oral presentation
4F4G - Tribovoltaic effect and self-powered intelligent bearing
ZHANG, C. - Beijing Institute of Nanoenergy and Nanosystems
08:30
09:30
08:3009:30
EUROPA III-IV
08:30 - 09:30
Plenary
08:30 - 09:30
Chair: Roberto Martins de Souza (USP) - Brazil
4DTR - Lessons from Nature: Bioinspired Mechanically Durable and Self-healing Superliquiphilic/phobic Surfaces for Green Tribology
Bharat Bhushan - Ohio State University
09:30
10:50
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 15
09:30 - 10:50
09:30 - 09:50Oral presentation
4EPQ - Quantification of Zn adhesion on cast iron for stamping tools
CARVALHO, D. M. L. - Universidade Federal de Santa Catarina
09:50 - 10:10Oral presentation
4EQ2 - Effect of Multiple Metallic Powder Reuse Cycles on the Tribological Performance of Additively Manufactured 316L Stainless Steel by L-DED
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
10:10 - 10:30Oral presentation
4EQB - From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
YUAN, Y. - University of Leeds
10:30 - 10:50Oral presentation
4EQZ - EFFECT OF WELD DEFECTS IN RAILS ON WEAR NUMBER TGAMMA USING DYNAMIC MULTIBODY MODELING
RESTREPO-BARRIENTOS, P. - Instituto Tecnológico Metropolitano, Universidad Nacional de Colombia
OCEANIA-VIII
09:30 - 10:50
Tribo-Induced Surface and Sub-Surface Transformations - Session 07
09:30 - 10:50
09:40 - 10:10Invited Speaker
4FCS - Invited talk - Christine Boher
BOHER, C. - IMT Mines d'Albi
10:10 - 10:30Oral presentation
4EXG - The Role of Hydrogen in Rolling Contact Fatigue of Bearing Steels
Kinza Jamil - Imperial College London
OCEANIA I
09:30 - 10:50
Surface Engineering - Session 18
09:30 - 10:50
09:50 - 10:10Oral presentation
4F44 - Electrochemical and Microstructural Analysis of Laser-Cladded Coatings for Brake Disc Protection
Manoj, A. - Birla Institute of Technology and Science Pilani Hyderabad Campus
10:10 - 10:30Oral presentation
4F4D - Effect of triangular shaped textures on the performance of mechanical seals
Lassad - Centre Technique des Industries Mécaniques
10:30 - 10:50Oral presentation
4F4X - From Plasma Surface Alloying to Integrated Surface Engineering Strategies: a Route to Densify Gray Iron Surfaces
PIGOSSO, T. - Universidade Federal de Santa Catarina
OCEANIA II
09:30 - 10:50
Sustainable Tribology - Green Tribology and Energy Transition - Session 15
09:30 - 10:50
09:30 - 09:50Oral presentation
4EMX - A pathway to sustainable wear protection: Strengthened iron aluminide coatings omitting critical raw materials
VARGA, M. - Austrian Centre of Competence for Tribology - AC2T research GmbH
09:50 - 10:10Oral presentation
4EN6 - Numerical and Experimental Results for Grooved Dry Gas Seals
JOLLY, P. - Institut Pprime
10:10 - 10:30Oral presentation
4ENH - Effect on the plasticity of austenitic stainless steel 304L after ball-on-disc tribotesting in a hydrogen atmosphere
RODRIGUES, A. C. P. - Centrale Lyon
10:30 - 10:50Oral presentation
4EWR - TEHD Performance Evaluation of Planetary Gear Journal Bearings with Flexible Bushings for Wind Turbine Gearboxes Considering Transient Gear-Meshing Loads
ROSA, T. G. - Universidade de São Paulo
OCEANIA IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 19
09:30 - 10:50
09:30 - 09:50Oral presentation
4EYC - Comparison of the Abrasion Resistance of High-Performance Steels Using Ball Cratering Micro-Abrasion
EUZEBIO, L. S. - Universidade Federal do Rio Grande do Sul
BRAGANÇA, B. C. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
10:10 - 10:30Oral presentation
4F4K - Simulation and Experimental Study on Copper fluid Jet Polishing
GUO, D. - Tsinghua University
10:30 - 10:50Oral presentation
4F4M - Effect of Roller Profile Modification on Wear Behavior of Tapered Roller Bearings
ZUO, K. - Tsinghua University
OCEANIA IX
09:30 - 10:50
Advances in Tribochemistry and Lubrication Mechanisms: Emerging Insights into Lubricants and Additives - Session 15
09:30 - 10:50
09:40 - 10:10Keynote Speaker
4EBT - Tribochemistry in superlubricity of water-based lubricants
KALIN, M. - University of Ljubljana
10:10 - 10:30Oral presentation
4FAJ - Deep Eutectic Solvents for Friction Reduction and Anti-Wear
LI, Z. - Lanzhou Institute of Chemical Physics, Chinese Acadmey of Sciences
10:30 - 10:50Oral presentation
4FAT - Regulating the formation of carbon-based tribofilm by tribocatalytic Chemistry and sustainable lubrication
QIAO, D. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
OCEANIA VI
09:30 - 10:50
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 15
09:30 - 10:50
Chair: Vladislav A. Yastrebov
09:40 - 10:10Invited Speaker
4EDA - A unified thermo-mechanical framework for rolling-sliding rubber-ice friction
MAZUYER, D. - École Centrale de Lyon
10:10 - 10:30Oral presentation
4ETH - Impact of Carbon Fiber Surface Modification on Wear Mechanisms in CFRP Composites
MENDONÇA, A. S. D. - Universidade Federal de Santa Catarina
10:30 - 10:50Oral presentation
4EWT - Transition Characteristics of Fluid/Mixed Friction Regimes on Cylinder Block/Valve Plate Interface of a Wide-Range Variable-Speed Axial Piston Pump
LYU, D C. - Beihang University (Beijing University of Aeronautics and Astronautics)
OCEANIA VII
09:30 - 10:50
Triboeletric Nanogenerators for Energy Sensors - Session 03
09:30 - 10:50
Chair: Chi Zhang
09:40 - 10:10Invited Speaker
4FCZ - Invited talk - Zhen Wen
WEN, Zhen - Soochow University
10:10 - 10:30Oral presentation
4DNC - Triboelectric Self-Powered Sensing and Digital Twin Mapping for Train Wheelset Bearings
WANG SONG - Tsinghua University China
10:30 - 10:50Oral presentation
4EBR - PVDF-Fe3O4 Composites for Triboelectric Nanogenerators
Durga Prasad Pabba - Universidad Tecnológica Metropolitana
OCEANIA X
09:30 - 10:50
Surface Engineering - Session 15
09:30 - 10:50
09:30 - 09:50Oral presentation
4ESF - Tribocorrosive Wear in Miller Tests of Tool Steels and High Chromium Cast Iron Used in Mining Industry
SANTOS, J. M. A. D. - Instituto Tecnológico Vale
09:50 - 10:10Oral presentation
4ESH - Influence of microstructure and hardness of WC-Co studs on laboratory and HPGR field test performance
SANTOS, J. M. A. D. - Instituto Tecnológico Vale
10:30 - 10:50Oral presentation
4ET6 - The effect of structure on the wear resistance of a hydrotalcite-like coating grown on Zn alloy substrate
ZIMOWSKI, S. - AGH University of Krakow
09:45
10:50
09:4510:50
OCEANIA V
09:45 - 10:50
Biotribology, Biomimetics and Food Tribology - Session 15
09:45 - 10:50
Chair: Bharat Bhushan
09:45 - 10:10Invited Speaker
4FCQ - Invited Talk - Prof. Jason Stokes from The University of Queensland
Stokes, J. - University of Queensland
10:10 - 10:30Oral presentation
4ENP - Improvements to oral tribology test methodologies for xerostomia aid optimisation
BARRETT, E. - Imperial College London
10:30 - 10:50Oral presentation
4ENR - Engineering Fluid–Porous Interface Affinity for Reversible Infiltration and Release in Biomimetic Tribological Contacts
SARDIELLO, M. G. - Freudenberg Technology Innovation SE & Co. KG, Istituto Italiano di Tecnologia, University of Salento
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 16
11:30 - 12:30
11:30 - 11:50Oral presentation
4ER4 - Synergistic wear mechanisms in grinding media: how does the wear of grinding balls occur?
CAMPIDELI, V. C. - Instituto Tecnológico Vale
11:50 - 12:10Oral presentation
4ES2 - Optimisation of EV drivetrain fluids using a system-level efficiency model
SHORE, J. - Imperial College
12:10 - 12:30Oral presentation
4ES4 - Study on the Tribological Properties of TiC-316L Composites Prepared by MEAM
ZHOU, S. - China University of Mining & Technology Beijing
OCEANIA-VIII
11:30 - 12:30
Tribo-Induced Surface and Sub-Surface Transformations - Session 08
11:30 - 12:30
11:30 - 11:50Oral presentation
4EXT - Electrically Tunable Behavior of Nb-Doped MoS2 Coatings
DANELON, M. R. - Universidade de São Paulo
11:50 - 12:10Oral presentation
4EZN - Effect of Ti2SnC on properties of iron-based hybrid self-lubricating composites
NEVES, G. O. - Universidad del Biobio
12:10 - 12:30Oral presentation
4F2Z - Influence of diffused hydrogen on cavitation-erosion resistance and damage mechanisms of 316L stainless steel
Stefanie Hanke - Universität Duisburg Essen
OCEANIA I
11:30 - 12:30
Surface Engineering - Session 19
11:30 - 12:30
11:30 - 11:50Oral presentation
4F6M - Tribological Behavior of Plasma-Nitrided Steels Evaluated by Gear Contact Fatigue Test
ANDRIONI, T. D. - Universidade Federal de Santa Catarina
11:50 - 12:10Oral presentation
4F6W - Tribological Behaviour of DLC-Coated Surfaces Under Electrified Lubricated Sliding Contacts
PEREIRA, D. G. - Universidade Federal de Santa Catarina
12:10 - 12:30Oral presentation
4FAB - Effect of plasma nitriding on electrified tribological contacts: the case of oil-lubricated AISI 4140 steel
PIRES, J. A. - Universidade Federal de Santa Catarina
OCEANIA II
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 16
11:30 - 12:30
11:30 - 11:50Oral presentation
4ESS - Experimental Evaluation of Structural Characteristics of a Hybrid Thrust Foil Bearing Using Metal and Viscoelastic Material
Masayuki Ochiai - Tokai University
11:50 - 12:10Oral presentation
4ESX - Wear in Electrified Rolling-Sliding Contacts
YOUSUF, A. - Imperial College London
12:10 - 12:30Oral presentation
4ET2 - Tribological behavior of low viscosity synthetic ester base oils for Electric Vehicles under pure sliding electrified conditions
BARRIGA, J. - Fundación Tekniker
OCEANIA IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 20
11:30 - 12:30
11:30 - 11:50Oral presentation
4F4W - Comparative evaluation of the abrasive wear response on brake pads of SUV and pickup trucks using a modified ASTM G65 method
BARRIONUEVO, G. O. - Universidad San Francisco de Quito
11:50 - 12:10Oral presentation
4F6G - Niobium carbide as allrounder for machining and wear protection
Eduardo Cannizza - EHT Consultoria em Engenharia Ltda
12:10 - 12:30Oral presentation
4FDP - Wear analysis of the friction stir welding (FSW) tool for the AA6063 aluminum welding process
JAIMES, I. G. - Universidad Industrial de Santander
OCEANIA IX
11:30 - 12:30
Sustainable Tribology - Green Tribology and Energy Transition - Session 18
11:30 - 12:30
11:30 - 11:50Oral presentation
4EY2 - Grease-lubricated hybrid rolling element bearings: friction torque and carbon footprint
CALDERON-SALMERON, G. - Royal Institute of Technology / Kungliga Tekniska Högskolan
11:50 - 12:10Oral presentation
4EYT - Tribological Performance of Sustainable Biocomposite Brake Pads
BARBA, J. H. D. - Universidade Tecnológica Federal do Paraná
OCEANIA V
11:30 - 12:30
Biotribology, Biomimetics and Food Tribology - Session 16
11:30 - 12:30
Chair: Klara Feile (FAU) - Germany (Deutschland)
11:30 - 11:50Oral presentation
4EQV - Commissioning of a Rheometer-Based Ball-on-Three-Plates Configuration for Pre-Clinical Friction Testing of Cartilage
TORTORETO, L. - Rush University Medical Center
11:50 - 12:10Oral presentation
4ESA - MORPHING SURFACE TOPOGRAPHY AS PLATFORM FOR CULTURE CELLULAR BIOCONTACTS
SANZIA, G. M. C. - Istituto Italiano di Tecnologia, University of Salento
12:10 - 12:30Oral presentation
4EVB - Advanced Preclinical Simulation – Physiological Adverse Activities on Metal-on-Polymer THRs and Ceramic-on-Ceramic Hip Resurfacing
BEADLING, A. R. - University of Birmingham
OCEANIA VI
11:30 - 12:30
Multiscale Approaches for Multiphysics Modelling and In Situ Experiments in Tribology - Session 16
11:30 - 12:30
Chair: Denis MAZUYER (EC-LYON) - France
11:30 - 11:50Oral presentation
4EYJ - Multiscale Entropy Coupling in Tribological Running-In: Surface Topography as a Mesoscale Entropy Reservoir
BRODMANN, B. - OptoSurf GmbH
11:50 - 12:10Oral presentation
4EYV - A Multi-Scale Modelling of Metal-to-Metal Seals
YASTREBOV, V. - CNRS, Mines Paris - PSL
12:10 - 12:30Oral presentation
4EZJ - Experimental characterization of particle-shape and surface-dependent tribological properties in railway ballast via 3D scanning and DEM calibration
BORTOLETO, E. M. - Instituto Tecnológico Vale
OCEANIA VII
11:30 - 12:30
Triboeletric Nanogenerators for Energy Sensors - Session 04
11:30 - 12:30
Chair: Zhen Wen
11:30 - 11:50Oral presentation
4EF4 - Triboelectric nanogenerators (TENG) constructed from dense ZIF-zni crystals integrated in PU composite films
JIN, C. - University of Oxford
11:50 - 12:10Oral presentation
4EFH - Decoupling the effects of normal and shear stresses on the triboelectrification of PTFE via in-situ tribometry
UMER, J. - University of Birmingham
12:10 - 12:30Oral presentation
4ETJ - Taking Charge off Droplets: Advancing the Droplet TENG
PRENDERGAST, O. - Imperial College London
OCEANIA X
11:30 - 12:30
Surface Engineering - Session 16
11:30 - 12:30
11:30 - 11:50Oral presentation
4ETA - Influence of Environmental Molecules on the Nano-interface Structure of Hydrogenated Carbon Nitride Coatings under Dry Conditions
KURIYAGAWA, K. - Tohoku University
11:50 - 12:10Oral presentation
4ETV - Molecular Dynamics Study of the Mechanical and Tribological Characteristics of Metal-Doped DLC Nanocomposite Coatings
LEE, S. H. - Kyungpook (Kyungbook) National University
12:10 - 12:30Oral presentation
4EVG - Influence of Laser-Textured Shafts on Friction and Temperature Distribution in Journal Bearing Systems
KLINGHART, B. - MSE - RWTH Aachen University
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
14:00
16:00
14:0016:00
EUROPA III-IV
14:00 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 17
14:00 - 16:00
14:00 - 14:20Oral presentation
4ETD - Numerical analysis of thermal fatigue behavior of AISI H13 tool steel produced by Power Bed Laser Fusion (PBF-LB/M)
LIMA, V. A. D. - Universidade de São Paulo
14:20 - 14:40Oral presentation
4ETF - Fabrication of Electronics and Sensors using a Surface Energy-Directed Assembly Process
CHAI, Z. - Tsinghua University
14:40 - 15:00Oral presentation
4ETP - Stretchable Serpentine Electrodes with High Fidelity Fabricated Using Orientation-Controlled Surface Energy-Directed Assembly
YUAN, S. - Tsinghua University
15:00 - 15:20Oral presentation
4ETQ - Evolution of Corrosion-Induced Friction and Wear Mechanisms in Cylinder Liner Material under Methanol Engine Conditions
LI, H. - Harbin Engineering University
15:20 - 15:40Oral presentation
4ETS - Effect of Additive Manufacturing Process (SLM vs. LMD) on Cavitation Erosion Resistance of SS316L
Teixeira, J.H. - Universidade Estadual de Ponta Grossa
4FAQ - Evaluation of the tribological performance and compatibility of lubricants in an electric vehicle (EV) component
AMANOV, A. - Tampere University
15:00 - 15:20Oral presentation
4FBR - Enhanced Tribological Performance of Fluorine-Doped Diamond-Like Carbon Films on Rough Stainless Steel Substrates
RAMOS, B. B. - Universidade Federal de Santa Catarina
15:20 - 15:40Oral presentation
4FDK - Enhancing the tribological performances of aviation gears via tailored surface texturing
DAI, Q.W. - Nanjing University of Aeronautics & Astronautics
15:40 - 16:00Oral presentation
4DMP - Experimental and Numerical Investigation of Tribological Performance and Failure Mechanisms in Nanocomposite Coatings
Zulfiqar Khan - Bournemouth University
OCEANIA II
14:00 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 17
14:00 - 16:00
14:00 - 14:20Oral presentation
4ETB - Development of Thixotropic Materials based Eco-friendly Lubricants
SINGH, M. K. - Indian Institute of Technology Kanpur
14:20 - 14:40Oral presentation
4ETX - Comparative Tribology Characterization of Hydrogen-Charged Steels
SILVEIRA, P. L. G. D. S. - Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte, Universidade Federal do Rio Grande do Norte
14:40 - 15:00Oral presentation
4EV2 - Plasma Nitriding of API X70 Steel for Hydrogen Transport Applications: Effects on embrittlement and tribological performance
, C. M. A. M. A. - Universidade Federal do Rio Grande do Norte
15:00 - 15:20Oral presentation
4EWB - Effects of Copper Oxide Nanoparticles Additives on the Lubricity of BiodieselFuel
COSTA, L. E. G. D. - Universidade Federal do Rio Grande do Norte
15:20 - 15:40Oral presentation
4EPA - Avocado oil as a sustainable base for top-of-rail friction modifiers
NEVSHUPA, R. - CSIC
15:40 - 16:00Oral presentation
4EXV - Friction and wear behaviour of fully bio-based nanocellulose composites
KNEISSL, L. M. - Luleå University of Technology, University of Ljubljana
OCEANIA IV
14:00 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 21
14:00 - 16:00
14:00 - 14:20Oral presentation
4F6S - A COMPARATIVE STUDY OF ROLLING-CONTACT FATIGUE–INDUCED WEAR INTEMPERED LOWER BAINITE, UPPER BAINITE, AND PEARLITE
GOLDENSTEIN, H. - Universidade de São Paulo
14:20 - 14:40Oral presentation
4FA6 - Mechanisms of material removal in Nd-Fe-B permanent magnet
COSTA, E. C. - Universidade Federal de Santa Catarina
14:40 - 15:00Oral presentation
4FAA - Wear mechanisms of Si3N4 cutting tool in milling of austempered ductile iron
COSTA, E. C. - Universidade Federal de Santa Catarina
15:00 - 15:20Oral presentation
4FAY - In-situ High Resolution Digital Image Correlation (HRDIC) Analysis of Strain Distribution Around Artificially Generated WEL in Advanced Rail Steels
BIAZON, L. - University of Sheffield
15:20 - 15:40Oral presentation
4FBH - Investigation on the Shoulder Wear Mechanism of SR-20 Aircraft Tires Under Thermo-Mechanical Coupling
FAN, G. - Civil Aviation Flight University of China
15:40 - 16:00Oral presentation
4FBK - Bringing the Dead Zone to Life: In-Situ Visualization of Interfacial Stagnation in Metal Cutting
MSAOUBI, R. - Lund University
OCEANIA IX
14:00 - 16:00
Sustainable Tribology - Green Tribology and Energy Transition - Session 19
14:00 - 16:00
14:00 - 14:20Oral presentation
4EZS - Uncertainty quantification and surrogate modelling for wind turbine journal bearings
XAVIER, L. M. - Universidade de São Paulo
14:20 - 14:40Oral presentation
4F2J - Tribocorrosion and Multidegradation Behavior of Austenitic and Super-Duplex Stainless Steels
ESPALLARGAS, Nuria - Norwegian University of Science & Technology (English)
14:40 - 15:00Oral presentation
4F4C - Functionalized Graphene-Derived Nano-additives as Solid Lubricants in UHMWPE composites
MARTÍNEZ-RUBIO, P. M. - Lulea University of Technology / Luleå tekniska universitet
15:00 - 15:20Oral presentation
4F4N - Wear Performance of Coated Surfaces Under High-Pressure
Al Sheikh OMAR, A. - University of Leeds
15:20 - 15:40Oral presentation
4F6P - Chemical analysis of the degradation of green lubricants in tribological tests
OLIVEIRA, A. C. - Universidade Federal do Rio Grande
15:40 - 16:00Oral presentation
4FB6 - Tribological and mechanical performance of nano-SiO2 reinforced 3D printed multiscale PEEK composites
EMAMI, N. - Luleå University of Technology
OCEANIA X
14:00 - 16:00
Surface Engineering - Session 17
14:00 - 16:00
14:00 - 14:20Oral presentation
4EW6 - An Investigation of Tribological Behavior and Wear Mechanisms of ID-HVOF-Sprayed Inconel 718 Coatings
BLUNK, S. - McGill University
14:20 - 14:40Oral presentation
4EYM - Surface Texturing as a Game Changer for Forging Dies
BARBA, J. H. D. - Universidade Tecnológica Federal do Paraná
14:40 - 15:00Oral presentation
4EYR - Electrified Tribological Behavior and Semiconducting Response of DLC Coatings on Tool Steel
SANTOS, L. A. D. - Universidade de São Paulo
15:00 - 15:20Oral presentation
4EZR - Friction and wear performance of nano-multi layered DLC
TANAKA, H. - Kyushu University
15:20 - 15:40Oral presentation
4F24 - Development of high hardness and high nitrogen content ta-CNx film
SHOMA, W. - Nagoya University
15:40 - 16:00Oral presentation
4F26 - Load-insensitive mild wear in tool steels via duplex nitriding/AlCrN and a monoclinic ZrO2 nanoparticle topcoat
DALCIN, R. L. - Universidade Federal de Santa Maria
14:20
16:00
14:2016:00
OCEANIA V
14:20 - 16:00
Biotribology, Biomimetics and Food Tribology - Session 17
14:20 - 16:00
Chair: Jason Stokes
14:20 - 14:40Oral presentation
4EWH - Tactile friction under boundary lubrication: Effect of bulk concentration of surfactants on fingertip friction
S Gairola - Indian Institute of Science, Bengaluru
15:00 - 15:20Oral presentation
4EXF - A new route to assess soil abrasiveness and wear mechanisms for materials in tillage tools
Urban Wiklund - Uppsala University / Uppsala Universitet
15:20 - 15:40Oral presentation
4EZV - From Biomimetic to Anti-friction: A study of Yam
GUO, Z. - Wuhan University of Technology
15:40 - 16:00Oral presentation
4F2W - Use of Pectin and Carrageenan as Low-Concentration Natural Polysaccharide Aqueous Lubricants
AINSWORTH, A. A. - University of Birmingham
16:30
16:45
16:3016:45
16:30 - 16:45
16:30 - 16:45
ASME - 2026 ASME International Mayo D. Hersey Award Ceremony
16:45
17:30
16:4517:30
16:45 - 17:30
16:45 - 17:30
CS - Closing Session & Awards
Presentation details
ITC in section meeting
14:00 - 17:10
Reunião do ITC
Presentation details
From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
15:00 - 15:05 Young Tribologist Elevator Pitches
Authors
yuyang yuan
Presenter
YUAN, Y. - University of Leeds
Presentation details
Effect of Surface Texturing on Plasto Hydrodynamic Lubrication of Coated Forming Tools
15:05 - 15:10 Young Tribologist Elevator Pitches
Authors
Elton Yvens Godoy de Oliveira
Presenter
OLIVEIRA, E. Y. G. - Universidade Federal de Pelotas
Presentation details
Development of a Computational and Experimental Framework for Tool Surface Texture Design in Sheet Metal Forming
15:10 - 15:15 Young Tribologist Elevator Pitches
Authors
Ainhoa Guinea; Andrea Aginagalde; Eneko Saenz de Argandoña; Joseba Mendiguren; Alaitz Zabala
Presenter
GUINEA, A. - Universidad de Mondragon Mondragon Unibertsitatea
Presentation details
Elasto-hydrodynamic Analysis of Non-Conformal Lubricated Contact
15:15 - 15:20 Young Tribologist Elevator Pitches
Authors
Luciana Nasca; Carmine Putignano; Elena Pierro; Cecilia Malverti; Davide Miazzo; Andrea Ronchi; Giuseppe Carbone
Presenter
NASCA, L. - Politecnico di Bari
Presentation details
Multiscale surface engineering enhances multifunctionality in wet environments
15:20 - 15:25 Young Tribologist Elevator Pitches
Authors
Nikolaos Rogkas
Presenter
ROGKAS, N. - National Technical University of Athens
Presentation details
Using Guided Waves to Understand Liquid Film Thickness in Journal Bearings
15:25 - 15:30 Young Tribologist Elevator Pitches
Authors
Song Yang; Hao Zhou; Yifei Yang; Dong Qiang; Xudong Yu; Bo Lan; Min Yu
Presenter
YANG, S. - Imperial College London
Presentation details
Role of Nanoparticles on Liquid Superlubricity across Lubrication Regimes of Non-Conformal Contacts
15:30 - 15:35 Young Tribologist Elevator Pitches
Authors
Lukáš Daněk; Petr Šperka
Presenter
DANĚK, L. - Brno University of Technology
Presentation details
Water-Lubricated Superlubricity of SiC/YAG–RHA Coatings Produced by SPS
15:35 - 15:40 Young Tribologist Elevator Pitches
Authors
Franciele Dias de Castro; Henara Lillian Costa; Nathan Fantecelle Strey
Presenter
CASTRO, F. D. D. - Universidade Federal de Pelotas
Presentation details
From Friction Reduction to Friction Orchestration: Toward Sustainable Superlubricity
15:40 - 15:45 Young Tribologist Elevator Pitches
Authors
Paul-marie Zubieta-Laborde; Graham L.W. Cross; Frédéric Dubreuil; Maria Isabel De Barros Bouchet
Presenter
ZUBIETA-LABORDE, P.m - Centrale Lyon
Presentation details
Design of Novel Space Environment-Adaptive Lubricating Films Inspired by In-Orbit Exposure Findings
15:45 - 15:50 Young Tribologist Elevator Pitches
Authors
Jun He
Presenter
HE, J. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Modification of load capacity property on a lubricant grease railway system contaminated with water
15:50 - 15:55 Young Tribologist Elevator Pitches
Authors
Rodrigo Ruiz Ramirez; José Antonio González Perez; Benjamín M. Marín-Santibañez
Presenter
Ruiz R.R - Instituto Politécnico Nacional
Presentation details
Impact of water contamination on greases used in railway systems
15:55 - 16:00 Young Tribologist Elevator Pitches
Authors
José Antonio González Perez; Manuel Vite-Torres; Rodrigo Ruiz Ramirez; Benjamín M. Marín-Santibañez
Presenter
PEREZ, J. A. G. - Instituto Politécnico Nacional
Presentation details
Exploring How Atomic-Scale Tribochemistry Establishes the Paradigm for Wafer-Scale Global Planarization of Advanced Integrated Circuits
16:00 - 16:05 Young Tribologist Elevator Pitches
Authors
Lifei Zhang; Xinchun Lu
Presenter
ZHANG, L. - Tsinghua University
Presentation details
Tribochemistry of iron oxide and DBP interactions in electrified environments.
16:05 - 16:10 Young Tribologist Elevator Pitches
Authors
Lucio Roberto Menezes; Marcelo Braga dos Santos; José Daniel Biasoli Mello
Presenter
MENEZES, L. R. - Universidade Federal de Uberlândia
Presentation details
Modeling in Tribology under Electrification
16:10 - 16:15 Young Tribologist Elevator Pitches
Authors
Zhaoran Zhu; James P. Ewen; Daniele Dini
Presenter
ZHU, Z. - Imperial College London
Presentation details
Geometrical properties of asperities on real contact area
16:15 - 16:20 Young Tribologist Elevator Pitches
Authors
Mark Kuzman; Mitjan Kalin
Presenter
KUZMAN, M. - Univerza v Ljubljani
Presentation details
EXPERIMENTAL STUDY FOR OBTAINING TRACTION CURVES IN THE RUNNIN ZONE ON RAILWAY RAIL TEXTURES
16:20 - 16:25 Young Tribologist Elevator Pitches
Authors
Aldo Santos Calderon Loredo; Itzia Verónica Martínez de la Rosa; Ezequiel A. Gallardo-Hernández; Jose Dolores Oscar Barceinas Sanchez
Presenter
CALDERON L. A. S. - Instituto Politecnico Nacional
Presentation details
Tribo-AID Kit: An Open-Hardware, Portable Tribometer for Education and Reproducible Testing
16:25 - 16:30 Young Tribologist Elevator Pitches
Authors
Christian Orgeldinger; Gohs, Marco; Gerhard, Jacqueline; Ricardo Alves da Silva Crespo Martins; Anton Kalimullin
Presenter
ORGELDINGER, C. - University of Bayreuth
Presentation details
Numerical approach of different tribological wear tests
16:30 - 16:35 Young Tribologist Elevator Pitches
Authors
João Vitor Raimundo Silva e Silva
Presenter
SILVA, J. V. R. S. E. - Universidade Federal do Espírito Santo
Presentation details
Tribology in hydrogen environments: development of experimental methodologies, analysis of mechanisms and evaluation of the influence of microstructure and surface
16:35 - 16:40 Young Tribologist Elevator Pitches
Authors
Aitor Ayerdi; Andrea Aginagalde; Wilson Tato; Iñaki Hurtado; Pablo Garcia-Michelena; Alaitz Zabala
Presenter
AYERDI, A. - Universidad de Mondragon Mondragon Unibertsitatea
Presentation details
Slurry Erosive Wear of DLC (a-C) Coatings
16:40 - 16:45 Young Tribologist Elevator Pitches
Authors
Juliana Souza de Oliveira
Presenter
OLIVEIRA, J. S. D. - Universidade Federal do Espírito Santo
Presentation details
DLC Coatings for Erosion and Scaling Resistance
16:45 - 16:50 Young Tribologist Elevator Pitches
Authors
Rubson Mação Camporez
Presenter
CAMPOREZ, R. M. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
Presentation details
Wear and fretting resistance of gas nitride layers on 3D-printed titanium alloys
16:50 - 16:55 Young Tribologist Elevator Pitches
Authors
Serhii Lavrys
Presenter
LAVRYS, S. - Vytautas Magnus University
Presentation details
Ultrahigh Thermally Conductive Ag-Coated Basalt Fibers with Hierarchical Nanostructured Interfaces for Improved Anti-Wear Properties of Self-Lubricating Fabric Composites
16:55 - 17:00 Young Tribologist Elevator Pitches
Authors
Chuang Zhu
Presenter
ZHU, C. - Donghua University
Presentation details
Plasma surface alloying: enhancing the tribological performance of automotive tooling materials through surface engineering
17:00 - 17:05 Young Tribologist Elevator Pitches
Authors
Tainá Pigosso
Presenter
PIGOSSO, T. - Universidade Federal de Santa Catarina
Presentation details
EVALUATION OF ZINC ADHESION ON CAST IRON TOOL MATERIALS
17:05 - 17:10 Young Tribologist Elevator Pitches
Authors
Pedro Paulo Búrigo Bastos; Francisco Cavilha Neto; Derek Manoel Luup Carvalho; João Pedro Vaz Silveira; Alicia Correa Lucena; Diego Berti Salvaro; Cristiano Binder
Presenter
BASTOS, P. P. B. - Universidade Federal de Santa Catarina
Presentation details
Influência do pré-tratamento da superfície na adesão de pátinas formadas em um novo aço resistente às intempéries.
17:10 - 17:15 Young Tribologist Elevator Pitches
Authors
HADILLE EMANUELE GONCALVES MENDES; Felipe Kevin Correia Luz; Marlise Moreira; José Henrique Alano; Márcio L. A. Cunha; Henara Lillian Costa
Presenter
MENDES, H. E. G. - Universidade Federal do Rio Grande
Presentation details
Tribological Analysis of Drill Rig Jaws: A Proposal for Wear Mechanism Characterization
17:15 - 17:20 Young Tribologist Elevator Pitches
Authors
Kamila de Fatima Costa da Silva; Cristian Camilo Viáfara Arango; Gustavo Tressia
Presenter
SILVA, K. F. C. - Instituto Tecnológico Vale
Presentation details
Reproduction of Wear Mechanisms in Chute Lining Plates: A Tribological Study Supported by Machine Learning Classification
17:20 - 17:25 Young Tribologist Elevator Pitches
Authors
Adrián Ricardo Cárdenas Flórez
Presenter
A.R. Cárdenas - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
Presentation details
ACCELERATING THE DEVELOPMENT OF HIGH-PERFORMANCE PM COMPOSITES: A MACHINE LEARNING APPROACH
17:25 - 17:30 Young Tribologist Elevator Pitches
Authors
Eduardo Moraes Souza
Presenter
SOUZA, E. M. - Universidade Federal de Santa Catarina
Presentation details
Polymer Based Composites for Tribology
17:30 - 17:35 Young Tribologist Elevator Pitches
Authors
Arthur Santana de Mendonça
Presenter
MENDONÇA, A. S. D. - Universidade Federal de Santa Catarina
Presentation details
Engineering Interfacial Adhesion of Thin Polymer Films with Nanoscale Heterogeneities
17:35 - 17:40 Young Tribologist Elevator Pitches
Authors
Chiranjit Majhi; Krishnacharya Khare
Presenter
MAJHI, C. - Indian Institute of Technology Kanpur
Presentation details
Titanium, hydroxyapatite, and bioglass coatings for enhancing the PEEK orthopaedic implants performance
17:40 - 17:45 Young Tribologist Elevator Pitches
Authors
Miguel Grissai Santos; Giuseppe Pintaude; Marjorie Benegra
Presenter
SANTOS, M. G. - Universidade Tecnológica Federal do Paraná
Presentation details
What activities are beneficial for the knee joint?
17:45 - 17:50 Young Tribologist Elevator Pitches
Authors
Arshad Kalathil Ashik
Presenter
ASHIK, A. K. - Imperial College London
Presentation details
The Potential of Solid Lubricants as Friction and Wear Modifiers in Restorative Materials for Dentistry
17:50 - 17:55 Young Tribologist Elevator Pitches
Authors
Magdalena Rodziewicz-Weremczuk; Vera Guduric; Agnieszka Magrys; Richard Frank Richter; Anne Bernhardt; Renata Chalas; Michael Gelinsky; Krzysztof Jan Kurzydlowski; Magdalena Lepicka
Presenter
RODZIEWICZ-WEREMCZUK, M. - Bialystok University of Technology
Presentation details
Multiscale Numerical Approach for Subject-Specific Wear Prediction of Total Knee Replacements
17:55 - 18:00 Young Tribologist Elevator Pitches
Authors
Klara Feile
Presenter
FEILE, K. - Friedrich-Alexander-Universität Erlangen-Nürnberg
Presentation details
Welcome Reception
18:00 - 19:30
Welcome Reception
Presentation details
Opening Ceremony
09:00 - 09:45
Opening Ceremony
Presentation details
Enabling the Electric Vehicle Revolution: Overcoming Materials and Tribological Challenges for a Green and Sustainable Transportation Future
09:50 - 10:50 Plenary Speaker
Authors
Ali Erdemir
Presenter
ERDEMIR, A. - Texas A&M University
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
Advances of Solid-Liquid Combined Superlubricity (SLCS)
11:30 - 12:30 Plenary Speaker
Authors
Jianbin Luo
Presenter
LUO, J. - Tsinghua University
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:50
Sponsor Lecture
Presentation details
Harmonious Tribo-Interfaces Enabled by Soft Matters
14:00 - 14:40 Peter Jost Award
Authors
Feng Zhou
Presenter
ZHOU, F. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Keynote talk - Mohamed El Mansori
14:50 - 15:20 Keynote Speaker
Authors
Mohamed El Mansori
Presenter
MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
Presentation details
How to understand the influence of ammonia on piston ring-liner tribology system?
15:20 - 15:40 Oral presentation
Authors
Xuan Ma; Xing Xu; Chang Ge; Xiqun Lu
Presenter
MA, X. - Harbin Engineering University
Presentation details
Active Bio-Contact Mechanics and Regenerative Rehabilitation of Osteoarthritic Joints
14:55 - 15:20 Invited Speaker
Authors
Valentin L. Popov; Jean-Emmanuel Leroy; Jasminka Starcevic; Rustam Ibragimovich Khalmuradov
Presenter
POPOV, V. L. - Technische Universität Berlin, Tsinghua University
Presentation details
Linking Current Density to Wettability and Tribological Properties of Anodized 5083-Aluminum Alloys
15:20 - 15:40 Oral presentation
Authors
Mohamed Abid; Abdelghani Ait Lahcen; Bouchra Hassoune-Rhabbour
Presenter
ABID, M. - Université de Technologie de Tarbes
Presentation details
Efficient characterization of extreme pressure properties of lubricants using advanced 4-ball test methodology
15:40 - 16:00 Oral presentation
Authors
Mathias woydt; Tushar Khosla; Krishnamurti Singh
Presenter
KHOSLA, T. - Rtec Instruments Inc.
Presentation details
Bridging Lab and Factory: Practical Applications of Ultra High Vacuum Tribology
14:50 - 15:20 Keynote Speaker
Authors
Esteban Broitman
Presenter
BROITMAN, E. - Sentys Inc
Presentation details
Ultra-low energy, temperature field measurement (TFM)-based early failuredetection of plain bearings
15:20 - 15:40 Oral presentation
Authors
Thao Baszenski
Presenter
BASZENSKI, T. - RWTH Aachen University
Presentation details
Calorimetric analysis of cracking under fretting loading: endurance curve and cumulative damage method
15:40 - 16:00 Oral presentation
Authors
Bruno BERTHEL; Vincent FRIDRICI
Presenter
Bruno BERTHEL - École Centrale de Lyon
Presentation details
Friction and Wear Control of Key Components in Marine Power System
14:50 - 15:20 Keynote Speaker
Authors
Chengqing Yuan; Zhiwei Guo; Conglin Dong
Presenter
YUAN, Chengqing - Wuhan University of Technology
Presentation details
A Path Towards Superlubricity in Real EHL Contacts
15:20 - 15:40 Oral presentation
Authors
Wassim Habchi; Scott Bair
Presenter
HABCHI, W. - Lebanese American University
Presentation details
Boundary lubrication performance of pure glycerol on steel-bronze contact
15:40 - 16:00 Oral presentation
Authors
Nischal Pokharel; Pär Marklund; Kim Berglund
Presenter
POKHAREL, N. - Luleå University of Technology
Presentation details
Keynote talk - Prof. Taylor Sparks
14:50 - 15:20 Keynote Speaker
Authors
Taylor Sparks
Presenter
Sparks, T. - University of Utah
Presentation details
A Data-Driven Framework Using Bayesian Optimization and Surrogate Models for the Accelerated Multi-Objective Design of Tribological Components
15:20 - 15:40 Oral presentation
Authors
César Pastor; Maureen Kosiol
Presenter
César Pastor - Robert Bosch GmbH
Presentation details
Physics-Informed Neural Network Framework for Static and Dynamic Performance Prediction of 3D Hydrodynamic Journal Bearings
15:40 - 16:00 Oral presentation
Authors
ADESH KUMAR TOMAR; Max Marian
Presenter
ADESH KUMAR TOMAR - Pontificia Universidad Católica de Chile
Presentation details
Keynote tal - prof. Seong H. Kim
14:50 - 15:20 Keynote Speaker
Authors
Seong H. Kim
Presenter
KIM, S. H. - Pennsylvania State University
Presentation details
Effect of PIB Succinimide Dispersant on the Stability and Tribological Performance of MoS₂ Nanoparticle Dispersions in PAO
15:20 - 15:40 Oral presentation
Authors
Fabrice Dassenoy
Presenter
Fabrice Dassenoy - École Centrale de Lyon
Presentation details
Film Formation Behavior of Nanoparticles under Rolling Contact Lubrication
15:40 - 16:00 Oral presentation
Authors
Yoji Sunagawa
Presenter
SUNAGAWA, Y. - Idemitsu Kosan Co.,LTd.
Presentation details
Multiscale Contact Mechanics with Applications
14:50 - 15:20 Keynote Speaker
Authors
Bo Persson
Presenter
PERSSON, B. - Forschungszentrum Jülich, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Assessment of Electrically Induced Bearing Damage in EV Powertrains
15:20 - 15:40 Oral presentation
Authors
Manjunath Manjunath; Dieter Fauconnier
Presenter
MANJUNATH, M. - Ghent University / Universiteit Gent
Presentation details
Prognosis of Thermal Critical Conditions of Planetary Plain Bearings in Wind Turbine Gearboxes
15:40 - 16:00 Oral presentation
Authors
Benjamin Lehmann; Anuj Khare; Math Lucassen; Georg Jacobs
Presenter
Benjamin Lehmann - RWTH Aachen University
Presentation details
Hydration Superlubricity: The Mechanism and Application
14:55 - 15:20 Invited Speaker
Authors
Chenhui Zhang
Presenter
ZHANG, C. - Tsinghua University
Presentation details
Hydrated Ions and Hydration Superlubricity
15:20 - 15:40 Oral presentation
Authors
Tianyi Han; Xavier Banquy; Chenhui Zhang; Jianbin Luo
Presenter
HAN, T. - Tsinghua University China
Presentation details
Atomic-level design for tribo-materials: a brief overview
Influence of steel cleanliness on the sliding wear resistance of railway wheels
18:00 - 18:20 Oral presentation
Authors
João Vitor Raimundo Silva e Silva; Daniela Nunes Oliveira; Carlos Alberto Rosa Neto; Mário José Bueno de Souza Freitas; Paulo Roberto Mei; Cherlio Scandian; Nathan Fantecelle Strey
Presenter
João Vitor Raimundo Silva e Silva - Universidade Federal do Espírito Santo
Presentation details
A Novel Triple-row Roller Bearing Test Rig for Evaluation of Grease Performance in Wind Turbines
16:40 - 17:00 Oral presentation
Authors
Yonggang Meng; Chenhao Guan; Jocelyn Zhao
Presenter
Yonggang Meng - Tsinghua University
Presentation details
Friction and wear behaviour of PLA-based bio-composites reinforced with oleaginous flax shives
17:00 - 17:20 Oral presentation
Authors
LALLEMENT Mathias; France Chabert; Philippe EVON; Tiphaine Mérian; Karl Delbé
Presenter
MATHIAS, L. - Université de Technologie de Tarbes
Presentation details
Impact of oil reconditioning on physico-chemical properties and tribological performance of lubricating oils.
17:20 - 17:40 Oral presentation
Authors
Myrna Carolina Cortes Morales; Aldara Naveira Suarez; Angels Salvador; Marta Barreras Carracedo; Roland Larsson; Pär Marklund
Presenter
Myrna Carolina Cortes Morales - Lulea University of Technology / Luleå tekniska universitet, SKF RecondOil
Presentation details
Impact of Electrical Current on the Tribological Performance of MoDTC Additives
17:40 - 18:00 Oral presentation
Authors
Zhengyuan PENG; Frédéric GEORGI; Pierre MONTMITONNET; Imène Lahouij
Presenter
Zhengyuan PENG - Centre de Mise En Forme de Matériaux
Presentation details
Investigating the Surface Fatigue Behaviour of Water-Based Lubricants in Applications Pertinent to EV Drive Units
18:00 - 18:20 Oral presentation
Authors
Haochen Yao; Christine Matta; Frank Berens; Amir Kadiric
Presenter
Haochen Yao - Imperial College
Presentation details
A machine learning based approach for the estimation of the global energy losses of cylindrical roller bearings
16:40 - 17:00 Oral presentation
Authors
Felix Pfister; Benedict Rothammer; Sandro Wartzack
Presenter
Felix Pfister - Friedrich-Alexander-Universität Erlangen-Nürnberg, Engineering Design
Presentation details
Machine-Learning Potentials for First-Principles Prediction of Tribochemical Reaction Rates
17:00 - 17:20 Oral presentation
Authors
Wilfred T Tysoe; Paolo Restuccia; Mauro Ferrario; Maria Clelia Righi
Presenter
Wilfred T Tysoe - University of Wisconsin-Milwaukee
Presentation details
Reproduction of Wear Mechanisms in Chute Lining Plates: A Tribological Study Supported by Machine Learning Classification
17:20 - 17:40 Oral presentation
Authors
Adrián Ricardo Cárdenas Flórez; Letícia Dias Batista; Cristian Camilo Viáfara Arango; Jose Jimmy Penagos; Andrea Gomes Campos
Presenter
Adrián Ricardo Cárdenas Flórez - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
Presentation details
Multi-Scale Insight into Green Lubrication: Coupling ML-driven Molecular Dynamics and Experiments for Bio-derived Additives
17:40 - 18:00 Oral presentation
Authors
Sophie Loehlé; Alberto Pacini; Pedretti; Pedro Martins Ferreira; Quentin ARNOUX; Hakim El Bahi; Maria Clelia Righi
Presenter
Sophie Loehlé - TotalEnergies
Presentation details
Data-Centric Investigation of Galling
18:00 - 18:20 Oral presentation
Authors
Arda Kupelioglu
Presenter
KUPELIOGLU, A. - University of Southampton
Presentation details
Investigation of tactile perceptual descriptors by vibrotactile rendering
16:40 - 17:00 Oral presentation
Authors
Livia Felicetti; Serena Michetti; Mihaela Juganaru; Jenny Faucheu; Eric Chatelet; Francesco Massi
Presenter
Livia Felicetti - Institut national des Science Appliquées de Lyon, Università degli Studi di Roma La Sapienza
Presentation details
A Customized Tribometer for Assessing Cartilage Tribological Behavior Under Physiologically Representative Knee Joint Loading
17:00 - 17:20 Oral presentation
Authors
Haytam Kasem
Presenter
Haytam Kasem - Azrieli College of Engineering
Presentation details
Tribological Performance of Extruded vs. 3D-Printed PEEK in Saliva for Dental Implant Applications
Stochastic process model of elastoplastic rough surface contact with scale-dependent hardness
16:40 - 17:00 Oral presentation
Authors
Yang Xu; Hengxu Song; Jianqiao Hu
Presenter
Yang Xu - Hefei University of Technology
Presentation details
In-situ Observation of High-Temperature Polymer Transfer Films
17:00 - 17:20 Oral presentation
Authors
Shouyi Yin; Ambrose Taylor; Janet S. S. Wong
Presenter
Shouyi Yin - Imperial College London
Presentation details
A multiscale approach for the contact and gas flow rate through flat circular large contact
17:20 - 17:40 Oral presentation
Authors
Mihai ARGHIR; Julian LE ROUZIC; Oumaima NAKIRI
Presenter
Mihai ARGHIR - Université de Poitiers
Presentation details
Truncation effects in the roller-end on flange contact
17:40 - 18:00 Oral presentation
Authors
Patrigeon Tristan; NICOLAS FILLOT; David Philippon; Guillermo E. Morales-Espejel
Presenter
Patrigeon Tristan - Laboratoire de Mécanique des Contacts et des Structures
Presentation details
Topography Evolution Across Grain Boundaries During Directional Scratching of Crystalline Metals
18:00 - 18:20 Oral presentation
Authors
Ramin Aghababaei; Jinxuan Zhu1
Presenter
AGHABABAEI, R. - Aarhus University / Aarhus Universitet
Presentation details
Carbon Dot-based Ionic Liquids: A Novel Additive for Lubrication and Corrosion Inhibition Application
16:40 - 17:00 Oral presentation
Authors
Haocheng Wang; Songwei Zhang; Litian Hu
Presenter
Songwei Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Projection-based Hyper Reduction for the Full-System Finite Element Solution of the Mixed Thermal Elastohydrodynamic Lubrication Line Contact Problem
17:00 - 17:20 Oral presentation
Authors
Alain El Hajj; Wassim Habchi; Chady Ghnatios; Philippe Lorong; Francisco Chinesta
Presenter
Alain El Hajj - École Nationale Supérieure des Arts et Métiers
Presentation details
Direct Observation and Quantification of the Lubrication Mechanism of Metal Disulfide Nanoparticles by In Situ TEM Nano-Friction Tests
17:20 - 17:40 Oral presentation
Authors
Fabrice Dassenoy
Presenter
Fabrice Dassenoy - École Centrale de Lyon
Presentation details
Frictional Properties and Energy Dissipation Mechanisms at Layered Material Interfaces
17:40 - 18:00 Oral presentation
Authors
Xiang Gao; Oded Hod; Michael Urbakh
Presenter
Xiang Gao - University of Science & Technology of China
Presentation details
Humidity-Driven Tribological Mechanisms of Ground Micro-Arc Oxidation Coatings on Aluminium Alloy
16:40 - 17:00 Oral presentation
Authors
Karl Delbé; Jean Denape; Jean-Yves Paris; Louis Rodriguez
Presenter
Karl Delbé - Université de Technologie de Tarbes
Presentation details
Tribologically Modified Tooth Geometries of Worm Wheels using AutomatedOptimization Algorithm
17:00 - 17:20 Oral presentation
Authors
Luis Haug; Simon Tillmann; Michael Geitner; Karsten Stahl
Presenter
Luis Haug - Technical University of Munich, Gear Research Centre
Presentation details
Wear and dielectric breakdown behavior of DLC coatings with different electrical properties under DC voltage lubrication environments
17:20 - 17:40 Oral presentation
Authors
Ji-Woong Jang; Jae-Il Kim; Jongkuk Kim; Young-Jun Jang
Presenter
Young-Jun Jang - Korea Institute of Materials Science, University of Science and Technology
Presentation details
Molybdenum Coatings for Extreme Environments: Tribological Study of PVD and APS Coatings
17:40 - 18:00 Oral presentation
Authors
Ricardo Alves da Silva Crespo Martins; Dennis Konopka; Martin Nicolaus; Florian Pape; Benedict Rothammer; Markus Polzer; Kai Möhwald; Gerhard Poll; Max Marian
Presenter
Ricardo Alves da Silva Crespo Martins - Leibniz University Hannover
Presentation details
A bioinspired approach using hierarchically structured DLC multilayer coatings for tribological applications
18:00 - 18:20 Oral presentation
Authors
Markus Polzer; Alexandra Neumann; Benedict Rothammer; Sandro Wartzack
Presenter
Markus Polzer - Friedrich-Alexander-Universität Erlangen-Nürnberg
Presentation details
Multimode Visible Optical Force Microscopy for Characterization of Two-Dimensional Materials and Nano Through-Silicon Vias
16:40 - 17:00 Oral presentation
Authors
Xinfeng Tan
Presenter
TAN, X. - Tsinghua University
Presentation details
The Λ*-ratio for circular EHL contacts: robustness, sensitivity, and validity
17:00 - 17:20 Oral presentation
Authors
Jonny Hansen; Deepak K. Prajapati; Marcus Björling; Roland Larsson
Presenter
HANSEN, J. - Lulea University of Technology / Luleå tekniska universitet, TRATON Group
Presentation details
Analyzing an entire scratch cross-sectionally in a TiN film
17:20 - 17:40 Oral presentation
Authors
Guizhi Wu; Peng Wang
Presenter
WU, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Angle-Resolved and Feature-Based Approaches to Surface Texture Analysis - A Correlation Study
17:40 - 18:00 Oral presentation
Authors
Matthias Eifler; Alexander Müller; Boris Brodmann; Jörg Seewig
Presenter
EIFLER, M. - IU International University of Applied Sciences
Presentation details
Sliding contact temperature determination using acicular grindable thermocouple and inverse heat conduction
18:00 - 18:20 Oral presentation
Authors
Oleksii Nosko; Yurii Tsybrii
Presenter
NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
Presentation details
Partial Slip in Tangential Contact of an Elastic Quarter-Space
18:20 - 18:40 Oral presentation
Authors
Qiang Li
Presenter
LI, Q. - Technische Universität Berlin
Presentation details
Advancements in Triboacoustics and its Integration in Tribological Practices:A Case Study with the Triboacoustic Pin
16:50 - 17:20 Invited Speaker
Authors
Michele Schirru; Markus Varga; Fabio Tatzgern
Presenter
SCHIRRU, M. - Austrian Centre of Competence for Tribology - AC2T research GmbH
Presentation details
Investigations of lubricated parallel sliding contacts on a ring on disc tribometer
17:20 - 17:40 Oral presentation
Authors
Gerhard Poll; Tobias Skubacz; Dilek Bulut
Presenter
Poll, G. - Leibniz University Hannover
Presentation details
Lab-scale testing and performance screening of gear oils
17:40 - 18:00 Oral presentation
Authors
Patrick Beau; Nora Kind
Presenter
KIND, N. - German Aerospace Center
Presentation details
Low-Speed Lubrication Behaviour of Greases for Wind Turbine Main Shaft Bearings Assessed by EIS
MANJUNATH, M. - Balasubramaniam Vengudusamy, Dieter Fauconnier, Ghent University / Universiteit Gent
Presentation details
Experimental study of friction-induced vibrations in sliding rough contacts
18:20 - 18:40 Oral presentation
Authors
ASSEMIEN N'GUETTA MODESTE; LE BOT ALAIN
Presenter
LE BOT, A. - Centrale Lyon
Presentation details
Evolution of the tribofilm and wear state transition mechanism of cylinder liner and piston ring
16:40 - 17:00 Oral presentation
Authors
Chang Ge; Hang Li; Xing Xu; Yufan Zhu; Xuan Ma; Xiqun Lu; Zhigang Liu
Presenter
Chang Ge - Harbin Engineering University
Presentation details
Reducing friction and wear of stainless steels during food cleaning processes using sodium hydrogen carbonate
17:00 - 17:20 Oral presentation
Authors
Kaouthar BOUGUERRA; Yan-Ming CHEN; Alexandre ROMAINE; Nadege DUCOMMUN; Pierre-Francois CARDEY; Eric BOURHIS; Pascal Andreazza; Damien VALENTE; Micka BAH; Caroline RICHARD
Presenter
Kaouthar BOUGUERRA - Centre Technique des Industries Mécaniques
Presentation details
Mechanochemistry of Ashless Antiwear Additive
17:20 - 17:40 Oral presentation
Authors
Chung Yan Leung; Jie Zhang; Hugh A. Spikes; Janet S. S. Wong
Presenter
Chung Yan Leung - Imperial College London
Presentation details
Tribological response of ceramic–graphene composites under ASTM G133: role of counterface, carbon content and environment
17:40 - 18:00 Oral presentation
Authors
Céline TREVISIOL; Yan-Ming CHEN; Adam BERRAIS; Hussein ABOELEINEIN; Bruno BERTHEL; Lucile JOLY-POTTUZ; MASENELLI-VARLOT; Alicia WEIBEL; Christiphe LAURENT; Viviane TURQ; Maria Isabel De Barros Bouchet
Presenter
Céline TREVISIOL - Centre Technique des Industries Mécaniques
Presentation details
Bridging the Gap Toward Sustainable Tribology: Environmentally Friendly Bonded MoS2-Based Solid Lubricants
18:00 - 18:20 Oral presentation
Authors
Parastoo Fallah; Charles J. Beall; Cara Hensley; Rolf Wuthrich; Pantcho Stoyanov
Presenter
Parastoo Fallah - Concordia University
Presentation details
Influence of the environment on the tribological properties of a solid lubricant transfer film containing MoS2
18:20 - 18:40 Oral presentation
Authors
Thomas Rey; Eric Papin; Vincent FRIDRICI; Fabrice Dassenoy
Presenter
REY, T. - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
Presentation details
Forum Young Tribologists - Roundtable Meentoring
18:20 - 19:20
The roundtable session is designed to foster intergenerational dialogue and provide valuable guidance to emerging tribologists. By bringing together senior and early-career professionals, it enables open, insightful discussions about the future of the field. Geared toward young tribologists, the session offers a unique chance to learn from experienced researchers and industry leaders as they share perspectives on new trends, technological challenges, and evolving career opportunities.
Moderator:
Prof. Salete Martins Alves | Federal University of Rio Grande do Norte (Brazil)
Panelists:
Dr Alfredo Fantetti | Imperial College London (UK)
Dr Andreas Rosenkranz | Universidad de Chile (Chile)
Prof. Hong Liang | Texas A&M University (USA)
Prof. Nicholas D. Spencer | ETH Zürich (Switzerland)
Presentation details
Forum Young Tribologists - Evening
19:30 - 21:30
Forum Young Tribologists - Evening Party
Presentation details
Biolubrication: from basics to applications
08:30 - 09:30 Plenary Speaker
Authors
Jacob Klein
Presenter
KLEIN, J. - Weizmann Institute of Science
Presentation details
Heat-Treatment Effects on Microstructure and Wear of L-PBF 316L Stainless Steel
09:30 - 09:50 Oral presentation
Authors
German Omar Barrionuevo; Magdalena Walczak; Jorge Ramos Grez
Presenter
German Omar Barrionuevo - Universidad San Francisco de Quito
Presentation details
Predicting as-built surface topography in laser powder bed fusion using in-situ thermography and thermal simulations
Luana Cristina Miguel Rodrigues; Alexandre Romão Costa Nascimento; Fadhel Ben Ettouil; Claudemiro Bolfarini; Claudio S. Kiminami; Guilherme Zepon; Robert Schulz; Christian Moreau; Francisco Gil Coury; Carlos Eiji Hirata Ventura; Walter José Botta; Guilherme Yuuki Koga
Presenter
KOGA, G. Y. - Univerdade Federal de São Carlos
Presentation details
Tribological Performance of Epoxy Composites Reinforced with Tailings of Scheelite
10:50 - 11:30 Poster
Authors
Clarissa Danielle Mendonça de Oliveira Guimarães; Hong Liang; Íngride Pamilly Ribeiro Araújo de Oliveira; Juliana Ricardo de Souza
Presenter
SOUZA, J. R. D. - Universidade Federal Rural do Semi
Presentation details
Comparative analysis and optimization of tribological properties of burnished and vapour-blasted surfaces using TOPSIS
10:50 - 11:30 Poster
Authors
Andrzej Dzierwa
Presenter
DZIERWA, A. - Rzeszow University of Technology
Presentation details
Analysis of wear behavior of single- and multilayer coatings subjected to cyclic micro-impact loading
10:50 - 11:30 Poster
Authors
Jolanta Krupa; Sławomir Zimowski
Presenter
KRUPA, J. - AGH University of Krakow
Presentation details
Evaluation of friction and electrochemical properties between PEEK biopolymer and Ti6Al4V alloy immersed in SBF
10:50 - 11:30 Poster
Authors
Sara Ivette Topete Velasco; César Sedano de la Rosa; Martín Flores Martínez; José Jesús Chagoya Serna; Ulises Alberto García Ramírez
Presenter
TOPETE-VELASCO, S. I. - Universidad de Guadalajara
Presentation details
Duplex Treatement of AISI H13 Tool Steel: Hot-Forging Testing
10:50 - 11:30 Poster
Authors
Alexandre da Silva Rocha; João Vitor Piovesan Dalla Nora; Felipe Canal; Frederico Murilo Wlassak; Steffen Aichholz; Rafael Silva
Presenter
ROCHA, A. S. - Universidade Federal do Rio Grande do Sul
Presentation details
Evaluation of the tribocorrosion behavior in seawater of multilayers Cr/CrC/Cr/DLC/Cr/CNx/Cr/DLC deposited by HiPIMS on AISI 4317 steel.
10:50 - 11:30 Poster
Authors
Jesús Chagoya-Serna; Ulises Alberto García Ramírez; Sara Ivette Topete Velasco; Jesús Alejandro Rodríguez-Herrera; Andrés González-Hernández; Luis Alberto López-Tejeda; Martín Flores Martínez
Presenter
CHAGOYA-SERNA, J. - Universidad de Guadalajara
Presentation details
Evaluation of friction and electrochemical behavior of UHMWPE biopolymer against CoCrMo
10:50 - 11:30 Poster
Authors
César Sedano de la Rosa; Sara Ivette Topete Velasco; Martín Flores Martínez; Ezequiel Alberto Gallardo Hernández; Ulises Alberto García Ramírez; María de Montserrat García Rivera
Presenter
César Sedano de la Rosa - Universidad de Guadalajara
Presentation details
Dual-Sided Replenishment Design for Grease Interfaces in Confined Clearances: Lubrication under Water Intrusion
Influence of Surface Free Energy on the Slurry-Jet Erosion Behavior of Thermally Sprayed Ceramic Coatings
10:50 - 11:30 Poster
Authors
Arthur Soares Fernandes Ferreira; Edson Cezar Grzebielucka; Hipolito Carvajal Fals; Irene Bida de Araújo Siqueira; Helga Elisabeth Pinheiro Schluter; Anderson G.M. Pukasiewicz
Presenter
GRZEBIELUCKA, E. C. - Universidade Tecnológica Federal do Paraná
Presentation details
Scratch Response in SS316L Across Rolling, Powder Metallurgy, and Additive Manufacturing
10:50 - 11:30 Poster
Authors
Izabel Fernanda Machado; Samira Tahanzadeh; Vanessa Seriacopi; Daniel Rodrigues
Presenter
MACHADO, I. F. - Universidade de São Paulo
Presentation details
Effect of microstructure on the friction and wear mechanisms at the shoulder-clip interface in ductile cast iron railway components
10:50 - 11:30 Poster
Authors
Natania Karoline da Vitoria Machado; Victor Cardoso Campideli; Eleir Mundim Bortoleto
Presenter
MACHADO, N. K. D. V. - Universidade Federal de Ouro Preto
Presentation details
Tribological Behavior of Copper-Coated Basalt Fiber Reinforced Composites for EMI Shielding Applications
10:50 - 11:30 Poster
Authors
Gihyun Yoon; Dogyun Byeon; Sungmin Yoon
Presenter
YOON,G. - Changwon National University
Presentation details
A Strategy for Protecting Surface Textures against tribocorrosion via ALD Nanofilm
10:50 - 11:30 Poster
Authors
Xiulin Ji; Xinyang Chen; Wang Chu; Bingbing Xia; Aleksandra Wanda Baron-Wiecheć
Presenter
JI, X. - Shantou University
Presentation details
Abrasive Wear and Friction Behaviour of 60%WC–NiCrBSi Hardfacing Pad Welds Modified with Rare Earth Oxides
10:50 - 11:30 Poster
Authors
Justyna Kasińska
Presenter
KASIŃSKA, J. . - Kielce University of Technology
Presentation details
Comparison of tribological properties of CrN and CrN/DLC coatings under lubrication with Ringer's solution and artificial saliva
RADOŃ-KOBUS, K. J. - Kielce University of Technology
Presentation details
The effect of the concentration of 1-butyl-3-methylimidazolium methanesulfonate in the coolant on the tribological properties of a TiAlN coating
10:50 - 11:30 Poster
Authors
Krystyna Joanna Radoń-Kobus; Joanna Kowalczyk; Monika Madej; Marcin Kowalski
Presenter
RADOŃ-KOBUS, K. J. - Kielce University of Technology
Presentation details
Effect of a Cr/CrC/TaCr/TaC/DLC multilayer coating deposited by HiPIMS on the tribocorrosion behavior of a biomedical CoCrMo alloy
10:50 - 11:30 Poster
Authors
Ulises Alberto García Ramírez; Jesús Chagoya-Serna; Luis Alberto López-Tejeda; Sara Ivette Topete Velasco; César Sedano de la Rosa; Martín Flores Martínez
Presenter
GARCÍA-RAMÍREZ, U. A. - Instituto Tecnológico José Mario Molina Pasquel Y Henríquez, Universidad de Guadalajara
Presentation details
Laser Irradiation Effect on Friction Behaviour at Sliding Interfaces of Various DLC Coatings
The objective of this work is to study the resistance to cavitation, erosion, and synergistic wear of Cr3C2 25NiCr and WC 10Co4Cr coatings deposited by HVOF. In synergistic cavitation/erosion wear tests with sand, an increase in the wear rate occurs.
10:50 - 11:30 Poster
Authors
Anderson Geraldo Marenda Pukasiewicz; Kaue Bertuol; Andre Renan Mayer; Irene Bida de Araújo Siqueira
Presenter
PUKASIEWICZ, A. G. M. - Universidade Tecnológica Federal do Paraná
Presentation details
Tribocorrosion in Grinding Media: Evaluation Using an Adapted Wet Rubber Wheel Test – ASTM G105
10:50 - 11:30 Poster
Authors
Victor Cardoso Campideli; Eleir Mundim Bortoleto
Presenter
CAMPIDELI, V. C. - Instituto Tecnológico Vale
Presentation details
Influence of DLC Deposition Parameters on Tribological Properties of X38CrMo16 Tool Steel
10:50 - 11:30 Poster
Authors
Szymon Drabik; Monika Madej; Katarzyna Piotrowska
Presenter
DRABIK, S. - Kielce University of Technology
Presentation details
Gray Cast Iron coated with Inconel 625 via plasma sintering.
10:50 - 11:30 Poster
Authors
Thiago Jesus do Carmo; Jurandir Marcos Sá de Sousa; Juliane Ribeiro da Cruz
Presenter
CARMO, T. J. D. - Universidade de São Paulo
Presentation details
Electrotribological Performance of ILs@CQDS as Lubricant Additives
10:50 - 11:30 Poster
Authors
Liu Mengmeng; Li Xinglin
Presenter
MENGMENG, L. - Hangzhou Dianzi University
Presentation details
Wear behaviour of coatings processed by PTA-DED modified by pre-deposition of graphene nanoplatelets and graphite particles
10:50 - 11:30 Poster
Authors
João Felipe Sippel; Ana Sofia Clímaco Monteiro D’Oliveira
Presenter
SIPPEL, J. F. - Universidade Federal do Paraná
Presentation details
NiAl-based coatings: Impact of WC nanoparticles addition on hardness and wear resistance
10:50 - 11:30 Poster
Authors
Heber Oswaldo Abreu Castillo; Beatriz Aparecida Pinto; Ana Sofia Clímaco Monteiro D’Oliveira
Presenter
PINTO, B. A. - Universidade Federal do Paraná
Presentation details
Microstructural and Tribological Evaluation of Martensitic Stainless Steel Coatings Applied by Submerged Arc Welding on Wrapper Rolls
10:50 - 11:30 Poster
Authors
Adonias Ribeiro Franco Júnior
Presenter
Franco Jr., A. R. - Instituto Federal de Educação, Ciência e Tecnologia do Espírito Santo
Presentation details
Morphology-driven tribological performance of FFF-3D printed PLA composites reinforced with carbonaceous fillers
10:50 - 11:30 Poster
Authors
Rafael Luciano Dalcin; Samara Hermann; Cristiano José Scheuer
Presenter
DALCIN, R. L. - Universidade Federal de Santa Maria
Presentation details
Build-height microstructural gradients as the primary driver of dry-sliding wear in WAAM ER308LSi
10:50 - 11:30 Poster
Authors
Rudimar Luis Becker; Rafael Luciano Dalcin; William Lemos Bevilaqua; Leandro João da Silva; Cristiano José Scheuer
Presenter
DALCIN, R. L. - Universidade Federal de Santa Maria
Presentation details
Numerical Analysis of the Mechanical Behavior of Clinched Joints in DP1300
10:50 - 11:30 Poster
Authors
Gabriel Vieira Arruda
Presenter
ARRUDA, G. V. - Universidade de São Paulo
Presentation details
Tribological Characterization of a Laser-Processed Metal Matrix-Carbide Reinforced Composite
10:50 - 11:30 Poster
Authors
Yuliia Chabak; VASYL IEFREMENKO; Bohdan Efremenko
Presenter
CHABAK, Y. - Institute of Materials Research, Slovak Academy of Science
Presentation details
Wear resistance of duplex coatings on Ti–6Al–4V alloy obtained by nitriding with subsequent PVD deposition of TiN and ZrN
10:50 - 11:30 Poster
Authors
Serhii Lavrys; Pranciškus Bakutis; Mykhailo Student; Juozas Padgurskas; Oleksandra Student; Volodymyr Hvozdets’kyi; Oleh Tkachuk; Khrystyna Zadorozhna; Aleksander Luk'yanenko; Audrius Zunda; Iryna Pohrelyuk
Presenter
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
Presentation details
Wear-resistant plasma-electrolytic oxidation coatings on Ti–6Al–4V alloy synthesised in an aluminate electrolyte containing chromium oxide
10:50 - 11:30 Poster
Authors
Mykhailo Student; Pranciškus Bakutis; Juozas Padgurskas; Serhii Lavrys; Volodymyr Posuvailo; Oleksandra Student; Volodymyr Hvozdets’kyi; Khrystyna Zadorozhna; Ihor Kovalchuk; Iryna Pohrelyuk
Presenter
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
Presentation details
Effect of preliminary nitriding on fretting resistance of bioactive coating on Ti-6Al-4V alloy
10:50 - 11:30 Poster
Authors
Serhii Lavrys; Oleh Tkachuk; Roman Proskurnyak; Iryna Pohrelyuk; Juozas Padgurskas
Presenter
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine
Presentation details
Combining physical and diffusion surface treatments for enhance the mechanical and tribological properties of titanium alloy
LAVRYS, S. - Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Vytautas Magnus University
Presentation details
Tribocorrosion and Scratch Behavior in Synthetic Seawater of DLC/CrC/CNx/CrC/Cr Multilayers Deposited by HIPIMS
10:50 - 11:30 Poster
Authors
Martín Flores Martínez; Luis Martin Flores Cova; Luis Alberto López-Tejeda; Andrés González-Hernández
Presenter
MARTÍNEZ, M. F. - Universidad de Guadalajara
Presentation details
Influence of the Wetting Angle of DLC Coatings Deposited on AISI 2205 in Pinon-Disk Wear Tests
10:50 - 11:30 Poster
Authors
Andressa Boeno de Lima; Edson Cezar Grzebielucka; Helga Elisabeth Pinheiro Schluter; Anderson Geraldo Marenda Pukasiewicz; Denilson José Marcolino de Aguiar
Presenter
LIMA, A. B. D. - Universidade Tecnológica Federal do Paraná
Presentation details
Friction and Wear Behavior of Vacuum-Sintered WC–Co with Recycled Grinding Sludge
10:50 - 11:30 Poster
Authors
Lucia Vieira; Fábio Miranda; Luan Matheus Chagas; Julia M. de A. Abdala; Suzilene Real Janasi; Fernando Santos Ortega
Presenter
VIEIRA, L. - Instituto Tecnológico de Aeronáutica
Presentation details
Tribological analysis of coating on Hadfield steel by pin-on-disk test applied to the "core" of the fixed-tip lane changer
10:50 - 11:30 Poster
Authors
Genivaldo dos Santos Ribeiro; Elison do Nascimento de Oliveira; Tarcio do Santos Cabral; Eduardo de Magalhães Braga; Paulo Cordeiro Machado
Presenter
RIBEIRO, G. D. S. - Universidade Federal do Pará
Presentation details
Roughness and Friction of Textured and Coated Skin-Pass Work Rolls
10:50 - 11:30 Poster
Authors
Paulo Loureço Monteiro Junior; Henara Lillian Costa
Presenter
MONTEIRO JR., P. L. - Universidade Federal de Uberlândia
Presentation details
Morphological characterization of curved bronze surfaces manufactured by a photochemical machining process
10:50 - 11:30 Poster
Authors
Juan José Idárraga Gutiérrez; Simón Zapata; Juan Camilo Sánchez González; Mauricio Tovar; Sebastían Rudas; Alejandro Toro; Wilson Carlos da Silva Junior
Presenter
GUTIÉRREZ, J. J. I. - Instituto Tecnológico Pascual Bravo
Presentation details
Synergistic integration of ionic liquid and lubricant microcapsules for epoxy coatings with concurrent self-healing and superior wear resistance
YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Microstructure and Tribological Properties of Cold Sprayed Amorphous Coatings
10:50 - 11:30 Poster
Authors
Wojciech Żórawski; Anna Trelka-Druzic; Anna Góral; Medard Makrenek; Szymon Kowalski
Presenter
WOJCIECH ŻÓRAWSKI - Kielce University of Technology
Presentation details
Study on the relationship between viscosity, wear debris, and lubrication regimes under three-body lubricated conditions
10:50 - 11:30 Poster
Authors
Jeng Haur Horng; Yang Yuan Chen; Wen Hsien Kao; Jin Long Lin
Presenter
HORNG, J. H. - National Cheng Kung University
Presentation details
Tribological properties of Fe-Cu-Ni sinters prepared by ball milling and hot pressing
10:50 - 11:30 Poster
Authors
Joanna Borowiecka-Jamrozek
Presenter
BOROWIECKA-JAMROZEK, J. - Kielce University of Technology
Presentation details
Analysis of Dry Wear of Non-Heat-Treated Martensitic Stainless Steel Coating Applied in the Thermomechanical Steelmaking Process
10:50 - 11:30 Poster
Authors
Josiara Novoa; Márcio L. A. Cunha; Hellen T. S. Moreira; Henara L. Costa
Presenter
NOVOA, J. - Universidade Federal de Pelotas
Presentation details
AISI 420S Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated States: Characterization and Tribological Performance
11:30 - 11:50 Oral presentation
Authors
Jean Honorato Ramos; Gustavo Henrique Zoschke; Naiah Domingues Ferracioli; Marcelo Taveira Veiga; Moises Felipe Teixeira; Jurandir Marcos Sá de Sousa
Presenter
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
Presentation details
Experimental investigation of tire-wear particle sizes
11:50 - 12:10 Oral presentation
Authors
Alexander Schmiedhofer; Carsten Gachot
Presenter
Alexander Schmiedhofer - Technische Universität Wien
Presentation details
Green Stainless Steels as Wear Resistant Materials for Erosion-Corrosion Applications in the Agribusiness Sector
12:10 - 12:30 Oral presentation
Authors
Vitor Pagani de Souza; Arthur Santana de Mendonça; Vanessa de Freitas Cunha Lins; Wilian da Silva Labiapari; Henara Lillian Costa; José Daniel Biasoli Mello
Presenter
SOUZA, V. P. D. - Aperam South America, Universidade Federal de Minas Gerais
Presentation details
Applying Persson’s model for manufacturing metal-polymer bonded contacts
11:30 - 11:50 Oral presentation
Authors
Heloísa Colli Moreira; Giuseppe Pintaude
Presenter
PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
Presentation details
Effect of Friction Stir Processing parameters on tribological behavior of copper
Geraldine Theiler - Federal Institute for Material research and Testing
Presentation details
Hard chrome substitution under tribological challenges: comparative study of EHCP and various coatings technologies
11:50 - 12:10 Oral presentation
Authors
Céline TREVISIOL; Mathieu MARQUER; Cyril FAYOLLE; Jorge Arturo SOTO PUENTE; David DUBLANCHE; Philippe SPILERS; Sébastien BEAUVAIS; Yan-Ming CHEN
Presenter
Céline TREVISIOL - Centre Technique des Industries Mécaniques
Presentation details
ML-prediction of the Electrical Contact Resistance at the GDL–BPP Interface
12:10 - 12:30 Oral presentation
Authors
Víctor Román; Varvara Asouti; András Vernes
Presenter
Víctor Román - Flow & Optimization, Software & Services, Technische Universität Wien
Presentation details
Wear Behavior Characterization through Deep Embedding Clustering
11:30 - 11:50 Oral presentation
Authors
Philipp Maximilian Sieberg; Shuai Zhu; Morteza Abedini; Stefanie Hanke
Presenter
SIEBERG, P. M. - Universität Duisburg Essen
Presentation details
Machine-learning-enabled interpretation of tribological deformation patterns in large-scale MD data
11:50 - 12:10 Oral presentation
Authors
Hendrik J Ehrich; Marvin Carl May; Carsten Gachot; Stefan J Eder
Presenter
EHRICH, H.J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
Presentation details
Enabling AI in Tribology through FAIR Knowledge Graphs
12:10 - 12:30 Oral presentation
Authors
Nick Garabedian; Ilia Tanev Bagov
Presenter
GARABEDIAN, N. - datin GmbH
Presentation details
Friction-Induced Nonequilibrium Phase Transformation of Low-Temperature Ice
11:30 - 11:50 Oral presentation
Authors
Hong Liang; Jean Michel Martin
Presenter
Hong Liang - Texas A&M University
Presentation details
Influence of Lead on the Tribological Performance and Wear Mechanisms of CuSn-Based Coatings
11:50 - 12:10 Oral presentation
Authors
Toukir Ahmed; Andre Renan Mayer; Amit Roy; Maya Harfouche; Barry Barnett; Richard R. Chromik; Christian Moreau; Pantcho Stoyanov
Presenter
AHMED, T. - Concordia University
Presentation details
Friction control by in-situ ionic liquids with PPM level in fully formulated aviation engine oils
12:10 - 12:30 Oral presentation
Authors
Mengke Zhang; Qin Zhao; Gaiqing Zhao; Xiaobo Wang
Presenter
ZHAO, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Interpreting oscillatory-shear measurements of viscosity in unbounded flows to understand shear-thinning behavior of lubricants in lubricated contacts
11:30 - 11:50 Oral presentation
Authors
Christian A. Utreras-Silva; Shreyas V. Jalikop; Bernhard Scheichl; András Vernes; Michal Kráčalík; Hendrik J Ehrich; Lucia Pisarova
Presenter
EHRICH, H. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH, Technische Universität Wien
Presentation details
Molecular Origins of Fluid Viscosity: From Shear-Thinning to Glass Formation
11:50 - 12:10 Oral presentation
Authors
Rosa M Espinosa-Marzal; Francois Sidoroff; Wilfred T Tysoe
Presenter
Wilfred T Tysoe - University of Wisconsin-Milwaukee
Presentation details
Deteriorative Effect of Water on the Boundary Lubrication Performance of Engine Oils
12:10 - 12:30 Oral presentation
Authors
Weimin Li
Presenter
LI, W. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Non-invasive Characterisation of Skin Mechanics and the Effects of Menopause and Ageing
11:30 - 11:50 Oral presentation
Authors
Margarida M.L.D Santos; Michael J. Sherratt; Robert Irwin; Marc Masen
Presenter
Margarida M.L.D Santos - Imperial College London
Presentation details
Frictional Shear Stress Drives Particle Transport in Cartilage-like Hydrogels
11:50 - 12:10 Oral presentation
Authors
Ahmed Al Kindi; Nemea Courelli; Shawn Yeom; Michael Bryant; Angela A. Pitenis
Presenter
Ahmed Al Kindi - University of California Santa Barbara
Presentation details
Assembly of lipid–hyaluronan complexes in osteoarthritic conditions: bulk structure, tribology and surface films
12:10 - 12:30 Oral presentation
Authors
Mark Rutland; Kangdi Sun; Tooba Shaib; Changwoo Do; Rosa M Espinosa-Marzal
Presenter
Mark Rutland - Royal Institute of Technology / Kungliga Tekniska Högskolan
Presentation details
Surface tension and wettability effects in EHL contacts
11:30 - 11:50 Oral presentation
Authors
Abdelhadi FAKKAR
Presenter
Abdelhadi FAKKAR - Institut national des Science Appliquées de Lyon
Presentation details
Experimental Parameter Study on Starved Lubricated Macroscopic Contacts
11:50 - 12:10 Oral presentation
Authors
Kassandra Kampen; Michael Müller
Presenter
KAMPEN, K. - Technische Universität Braunschweig
Presentation details
How fluid is distributed in a friction gap during mixed lubrication
12:10 - 12:30 Oral presentation
Authors
Timo Fräger; Kassandra Kampen; Michael Müller
Presenter
FRÄGER, T. - Technische Universität Braunschweig
Presentation details
Metastability and Size Effect during Transformation from Dislocation to Ripplocation in Bilayer Graphene
11:30 - 11:50 Oral presentation
Authors
Wei Qiu
Presenter
Wei Qiu - Tel Aviv University
Presentation details
Structure and Superlubricity Mechanism of Confined Hydrated Ions
11:50 - 12:10 Oral presentation
Authors
Yutong Li; Tianyi Han; Chenhui Zhang; Jianbin Luo
Presenter
LI, Y. - Tsinghua University
Presentation details
Phase Transition Structural Superlubricity
12:10 - 12:30 Oral presentation
Authors
Bao Jin; Yongyong He; Jianbin Luo
Presenter
JIN, B. - Tsinghua University, University of Cambridge
Presentation details
Accelerated Evaluation of Coating Performance Through Parallel Testing
11:30 - 11:50 Oral presentation
Authors
Lais M. Lopes
Presenter
Lais M. Lopes - Falex Tribology
Presentation details
The Promise of Solid Lubricants
11:50 - 12:10 Oral presentation
Authors
Carsten Gachot
Presenter
Carsten Gachot - Technische Universität Wien
Presentation details
Tribological Behavior of Magnetron-Sputtered MAX Phases: The Role of Surface Oxides
12:10 - 12:30 Oral presentation
Authors
Ronja Anton; Daniel Pölzlberger; Xudong Sui; Nadine Laska; Carsten Gachot
Presenter
Ronja Anton - German Aerospace Center
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:40
Sponsor Lecture
Presentation details
How Surface Topography and Chemistry Control Lubrication
14:00 - 14:40 Peter Jost Award
Authors
Juliette CAYER-BARRIOZ
Presenter
CAYER-BARRIOZ, J. - Ecole Centrale de Lyon
Presentation details
Development of a Wear Test Method for Emulsion Performance Evaluation
14:40 - 15:00 Oral presentation
Authors
Lais M. Lopes
Presenter
Lais M. Lopes - Falex Tribology
Presentation details
Comparison of severe and mild wear test conditions for assessing low-stress sliding mild abrasive wear of commercial transfer chute lining materials
15:00 - 15:20 Oral presentation
Authors
Luis Alfredo Acevedo Suarez; Renato Chaves Pereira da Silva; Vinícius Carvalho Teles; Cristian Camilo Viáfara Arango; Jose Jimmy Penagos
Presenter
Jose Jimmy Penagos - Instituto Tecnológico Vale
Presentation details
Influence of counterpart and oil formulation on wear of DLC-coated differential shafts for electric vehicles
15:20 - 15:40 Oral presentation
Authors
Pauline Faura; Johnny Dufils; Jérémy Gassmann; Etienne Macron
Presenter
DUFILS, J. - IREIS - HEF Group
Presentation details
Tribological Comparison of Pantograph Contact Materials for Railway Sliding Electrical Interfaces
15:40 - 16:00 Oral presentation
Authors
Oreen Oumer; Eric Gavignet; Didier CHAMAGNE; Pierre-Henri Cornuault; Philippe Baucour
Presenter
OUMER, O. - Université Marie-et-Louis-Pasteur
Presentation details
Effect of pigment volume concentration on scratch resistance of polyurethane and polyester coil coatings paint.
14:40 - 15:00 Oral presentation
Authors
Nicolas Mille; Marina Pecora; Thibaud Metivier; Didier Verchere; GAUTHIER, Christian
Presenter
MILLE, N. - Université de Strasbourg
Presentation details
Theoretical and experimental study of the roughness effect in normal contact of deformable bodies
15:00 - 15:20 Oral presentation
Authors
Irina Goryacheva; Anastasiya Yakovenko; Pavel Bukovskii
Presenter
BUKOVSKII, P. - Ishlinsky Institute for Problems in Mechanics RAS
Presentation details
Friction reduction of paraffin-based mineral oils in low-temperature environments
15:20 - 15:40 Oral presentation
Authors
mori daichi; Noritsugu Umehara; Takayuki Tokoroyama
Presenter
DAICHI, M. - Nagoya University
Presentation details
Fretting Wear of Oscillating Ball Bearing
14:50 - 15:20 Invited Speaker
Authors
Daniel Nelias; Remy Duquesne; Sébastien Morterolle
Presenter
NELIAS, D. - Laboratoire de Mécanique des Contacts et des Structures
Presentation details
Tribological Investigations under Varying Pressure Atmosphere
15:20 - 15:40 Oral presentation
Authors
Felix Zak
Presenter
ZAK, F. - Optimol Instruments Prüftechnik GmbH, Technische Universität München
Presentation details
Development of an Experimental Apparatus for Investigating Preload Loss in Bolted Joints under Cyclic Shear Loading
15:40 - 16:00 Oral presentation
Authors
Douglas da Silva Carvalho; João Paulo de Jesus Vieira; Miguel Angel Narvaez Ardila; Dênis Soares de Freitas; Bruno Sousa Carneiro da Cunha; Regina Paula Garcia; Leonardo Rosa Ribeiro da Silva
Presenter
ARDILA, M. A. N. - Laboratorio de Tecnologia em Atrito e Desgaste
Presentation details
Tribofilm Formation of Lubricant Additives in Ammonia Atmosphere
14:40 - 15:00 Oral presentation
Authors
Jie Zhang; Matthias Eggenstein; Janet S. S. Wong; Hugh A. Spikes
Presenter
Jie Zhang - Imperial College London
Presentation details
Lubricity of Ethanol-Containing Gasoline
15:00 - 15:20 Oral presentation
Authors
Jie Zhang; Eliane Gendreau; Nestor Soriano; Janet S. S. Wong; Hugh A. Spikes
Presenter
Jie Zhang - Imperial College London
Presentation details
Efficiency of sampling airborne wear particles generated by a pin-on-disc setup
15:20 - 15:40 Oral presentation
Authors
Oleksii Nosko; Yurii Tsybrii
Presenter
NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
Presentation details
What is a wear part?
15:40 - 16:00 Oral presentation
Authors
Mathias woydt; Rolf Luther
Presenter
Mathias woydt - MATRILUB
Presentation details
Similarity Mapping and Interpretable Machine Learning Reveal Patterns in Perfluoroalkyl Substances (PFAS) Adsorption Across Surfaces
15:00 - 15:20 Oral presentation
Authors
Prathima Nalam; Poornanand Tumuluri Venkata; Krishna Rajan
Presenter
NALAM, P. - University at Buffalo
Presentation details
i-TRIBOMAT: A Global Knowledge and Data Hub for Tribology
15:20 - 15:40 Oral presentation
Authors
Xavier Borras; Amaya Igartua; Franz Pirker; Dirk Spaltmann; Roland Larsson; Ichiro Minami; Helena Ronkainen; Friedrich Franek; Ivana Tóth
Presenter
BORRAS, X. - i-TRIBOMAT: The European Tribology Centre
Presentation details
Tool Wear–Driven Tribological Evolution in Surface Milling of Aluminum using Explainable AI
YU, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Size-driven tribo-chemical activity: Near-atomic-scale phosphorus-based particles enable self‑adaptive high‑stress macro-superlubricity via refactoring the carbon-based film from lubricating oil
14:40 - 15:00 Oral presentation
Authors
Peili Gao
Presenter
GAO, P. - Tsinghua University
Presentation details
Self-Lubricating PEEK Composite Based on Mechanically Responsive Hydrogel Microcapsules
15:00 - 15:20 Oral presentation
Authors
Wanxing Xu; Tianyi Han; Chenhui Zhang; Jianbin Luo
Presenter
XU, W. - Tsinghua University
Presentation details
Neutron reflection Characterisation of Lipid Analogues Adsorption at Steel/water Interface for Water-based Lubrication
15:20 - 15:40 Oral presentation
Authors
Xuzhi Hu
Presenter
HU, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Tribochemistry of iron oxide and DBP interactions in electrified environments.
15:40 - 16:00 Oral presentation
Authors
Lucio Roberto Menezes; Matheus Ruviero Laroza; Rômulo Porto Ferreira; Marcelo Braga dos Santos; José Daniel Biasoli Mello
Presenter
MENEZES, L. R. - Universidade Federal de Uberlândia
Presentation details
Multiscale In Situ Investigations and Multiphysics Models of Aqueous Gel Interfaces
14:50 - 15:20 Invited Speaker
Authors
Angela A. Pitenis
Presenter
PITENIS, A. A. - University of California Santa Barbara
Presentation details
Synchrotron In-situ Investigation of Multi-scale Polymer Tribological Response
15:20 - 15:40 Oral presentation
Authors
Almoataz Algazzar; Marko Bek; Roland Kádár; Kim Nygård; Ann Terry; Nazanin Emami
Presenter
ALGAZZAR, A. - Lulea University of Technology / Luleå tekniska universitet
Presentation details
3D adhesive contact mechanics: A variational energy-based approach
15:40 - 16:00 Oral presentation
Authors
Michele Santeramo; Carmine Putignano; Stefan Krenn; Giuseppe Carbone
Presenter
SANTERAMO, M. - Politecnico di Bari
Presentation details
Keynote talk - Prof. Lucio Isa
14:50 - 15:20 Keynote Speaker
Authors
Lucio Isa
Presenter
Isa, Lucio - Swiss Federal Institute of Technology / Eidgenössische Technische Hochschule ETH Zürich
Presentation details
Recent Lessons in Assessing Carbon Nanotubes’ Impact on Oil Tribological and Thermal Properties Using Standard Methods
15:20 - 15:40 Oral presentation
Authors
Chanaka Kumara; Wenbo Wang; Xiaoqian Wang; Seokhoon Jang; Ning Ren; Hsin Wang; Michael Lance; Harry M. Meyer; Jacob Bonta; Edward Murphy; Roger D. England; James A. Haynes; Jun Qu
Presenter
QU, J. - Oak Ridge National Laboratory
Presentation details
Surface Polarity Dominates Hydration Lubrication via Interfacial Ion Configuration in the Helmholtz Plane
15:40 - 16:00 Oral presentation
Authors
Jie Han; Zhuolin Wu; Yutong Li; Tianyi Han; Chenhui Zhang; Jianbin Luo
Presenter
HAN, J. - Tsinghua University
Presentation details
3 in 1 powder coatings with implemented antifriction function
14:40 - 15:00 Oral presentation
Authors
Dr. Michaela Gedan-Smolka; Marcel Tuschla; Peter Scholz; Paul Pavlov
Presenter
Dr. Michaela Gedan-Smolka - Leibniz-Institut für Polymerforschung Dresden
Presentation details
Simulating Damage Mechanisms in Quasistatic Sliding Contact of Friction Enhancing Surface Structures
15:00 - 15:20 Oral presentation
Authors
Jonathan Schanner; Alexander Hasse
Presenter
Jonathan Schanner - Technische Universität Chemnitz
Presentation details
Processing Relationships in Hybrid MXene Coatings for Advanced Solid Lubrication
15:20 - 15:40 Oral presentation
Authors
Martin Nastran; Alex Werdaner; Christina Danecker; Edoardo Marquis; Carsten Gachot
Presenter
Martin Nastran - Technische Universität Wien
Presentation details
Understanding tribological behavior of new REACh compliants sealed anodization of aluminum alloys
15:40 - 16:00 Oral presentation
Authors
Marc Schmittbuhl; Gilles Auregan; Alex Jacoboni; Joffrey Tardelli; Marjorie Cavarroc-Weimer; Vincent FRIDRICI
Presenter
Marc Schmittbuhl - École Centrale de Lyon
Presentation details
Gradients in Mucin: The Tear Film's Trick for Shear Invariance via Expanding Shear Zones
14:55 - 15:20 Invited Speaker
Authors
W. Gregory Sawyer
Presenter
SAWYER, W. G. - Moffitt Cancer Center
Presentation details
Design and Manufacturing of Mechanically Robust Superlubricious Artificial Joints and Menisci
15:20 - 15:40 Oral presentation
Authors
Shuanhong Ma
Presenter
MA, S. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Role of membrane associated mucins (MAMs) in boundary lubrication of corneal surface
15:40 - 16:00 Oral presentation
Authors
Prashant Kumar Sharma; Yong Chen; Theo G. van Kooten
Presenter
SHARMA, P. K. - University Medical Center Groningen
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
Study on Friction Mechanism and Application of Nano-TiO2 Additive with Different Structures under Extreme Working Conditions
16:00 - 16:40 Poster
Authors
Kai Zeng; Sixuan Fan; Rong QU; Xuechao Song; Wenjing Hu; Jiusheng LI
Presenter
LI, J. - Shanghai Advanced Research Institute, Chinese Academy of Sciences
Presentation details
Electric-field Control of Physifriction and Chemifriction in Sliding h-BN Contacts
16:00 - 16:40 Poster
Authors
Penghua Ying; Oded Hod; Michael Urbakh
Presenter
Penghua Ying - Xi'An Jiaotong University
Presentation details
Composite Nanolubricants for Wear Reduction in Mechanical Interfaces: Leveraging Diffusion and Atomic Disorder
16:00 - 16:40 Poster
Authors
Hua Jiang; Xianjun Hou; Chen Chu; Weiwei Guan; Bo Yi; Mohamed Kamal Ahmed Ali
Presenter
Hua Jiang - Hubei Longzhong Laboratory, Wuhan University of Technology
Presentation details
Load-Dependent Bimodal Friction at Super-Moiré Interfaces
16:00 - 16:40 Poster
Authors
Guorui Wang; Xinshuai Peng; Xiang Gao; Wei Guo
Presenter
Guorui Wang - University of Science and Technology of China
Presentation details
Influence of electrical current on the tribological performance of functionalized nanoparticles anti-wear additivesabstract for a poster
16:00 - 16:40 Poster
Authors
Zhengyuan PENG; Frédéric GEORGI; Pierre MONTMITONNET; Imène Lahouij
Presenter
Zhengyuan PENG - Centre de Mise En Forme de Matériaux
Presentation details
Effect of Silver Addition on the Tribological Properties of High Entropy Alloys
16:00 - 16:40 Poster
Authors
Wojciech Łoński; Maciej Łuszcz; Rafał Babilas; Katarzyna Młynarek Żak
Presenter
Wojciech Łoński - Łukasiewicz Research Network - Institute for Sustainable Technologies
Presentation details
Phenomena and Mechanisms of Boundary Lubrication through Molecule Simulation and Experiment
16:00 - 16:40 Poster
Authors
Junqin Shi
Presenter
SHI, J. - Northwestern Polytechnology University
Presentation details
Grease Film Thickness and Availability in Thermoplastic Rolling-Sliding Contacts
16:00 - 16:40 Poster
Authors
Ferdinand Schmid; Stefan Hofmann; Thomas Lohner; Karsten Stahl
Presenter
SCHMID, F. - Technical University of Munich, Gear Research Center
Presentation details
Superlubrication and Energy Consumption of Two-Dimensional Materials
16:00 - 16:40 Poster
Authors
Yuhong Liu
Presenter
LIU, Y. - Tsinghua University
Presentation details
Geometrical properties of asperities on real contact area
16:00 - 16:40 Poster
Authors
Mark Kuzman; Mitjan Kalin
Presenter
KUZMAN, M. - Univerza v Ljubljani
Presentation details
Real-Time Digital Image Correlation for In-Situ Analysis of Frictional Slip and Fracture in Tribological Contacts
16:00 - 16:40 Poster
Authors
Yang, Yinlong; Zhuoyi Yin; Giuseppe Carbone
Presenter
Yang, Y. - Nanjing University of Science & Technology
Presentation details
Multiscale Screening of Self-Lubricating Graphene-Reinforced Epoxy and IPN Nanocomposites under Dry Sliding
16:00 - 16:40 Poster
Authors
Matheus Mendes de Oliveira; MARCIA MARIE MARU; Eduardo Tomanik
Presenter
Maru, M.M. - National Institute of Metrology, Quality and Technology
Presentation details
Asperity sliding contact in the presence of adhesion
16:00 - 16:40 Poster
Authors
Uzair Iqbal; Musuvathi Santhaparipoornam Bobji
Presenter
Uzair Iqbal - Indian Institute of Science, Bengaluru
Presentation details
Deep learning and reactive force fields in the context of molecular dynamics simulations of doublewall carbon nanotube-based nanobearings friction performance
16:00 - 16:40 Poster
Authors
Cristiano Simões de Abreu; José Manuel Ramos Gomes
Presenter
C.S. Abreu - Instituto Superior de Engenharia do Porto
Presentation details
Protic Oil-soluble Ionic Liquids: The Structure Design and Lubrication Mechanism Study
16:00 - 16:40 Poster
Authors
Litian Hu
Presenter
HU, L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Enhancing Tribological Performance through Tribochemical Mechanisms and Surface Engineering
16:00 - 16:40 Poster
Authors
Xudong Sui
Presenter
Xudong Sui - Technische Universität Wien
Presentation details
Influence of Additive Treatment on Tribo-film Formation and Tribological Behaviour in Automatic Transmission Fluids
16:00 - 16:40 Poster
Authors
MOHAMAD ALI BIN AHMAD; Muhamad Aidil Tasnim Bin Roslan; TOMOKO HIRAYAMA; NORHANIFAH BINTI ABDUL RAHMAN; IZATUL HAMIMI BINTI ABDUL RAZAK
Presenter
AHMAD, M. A. B. - Universiti Teknologi Mara
Presentation details
Wear resistance of cermet titanium-based materials with hBN addition
16:00 - 16:40 Poster
Authors
Maciej Łuszcz; Remigiusz Michalczewski; Javier A. Ortega
Presenter
Remigiusz Michalczewski - Łukasiewicz Research Network - Institute for Sustainable Technologies
Presentation details
Effect of ZDDP Molecular Structure on the Tribological Durability of Fully Formulated Engine Oils under High-Load SRV Reciprocating Tests
FERREIRA, N. A. - Universidade Estadual de Campinas
Presentation details
Self-lubricating High-Entropy Alloy & Transition Metal Dichalcogenide Composites: Tribological Performance and Mechanisms
16:00 - 16:40 Poster
Authors
Dogyun Byeon; Sungmin Yoon
Presenter
BYEON,D. - Changwon National University
Presentation details
Influence of Thrust Bearing Geometry on Pressure Distribution and Load Capacity
16:00 - 16:40 Poster
Authors
Rodrigo Cecconi Simões; Thales Freitas Peixoto
Presenter
SIMÕES, R. C. - Universidade Estadual de Campinas
Presentation details
Evaluation of the Tribological Behavior of Greases: An Approach Based on Infrared Spectroscopy (FTIR) and Mini-Traction Machine Measurements
16:00 - 16:40 Poster
Authors
Larissa Solano de Almeida; João Carlos Fernandes de Queiróz; Newton Kiyoshi Fukumasu; Francisco José Profito; Roberto Martins de Souza; Alvaro Canto Michelotti
Presenter
ALMEIDA, L. S. - Universidade de São Paulo
Presentation details
Tribological Performance of Rail Greases for Wheel Flange–Rail Gauge Face Contact: A Comparison between Pin on Disc and Sphere on Disc Tests
16:00 - 16:40 Poster
Authors
BRUNO PEREIRA FERRER; PEDRO TAYER; ANDRE ZUIN; TIAGO COUSSEAU
Presenter
FERRER, B. P. - Universidade Tecnológica Federal do Paraná
Presentation details
Effect of Graphene Additives on Inconel 625 Processed by Spark Plasma Sintering
16:00 - 16:40 Poster
Authors
Nicole Machia Silva; Juliane Ribeiro da Cruz; João Felipe Sippel; Ana Sofia Clímaco Monteiro D’Oliveira
Presenter
SILVA, N. M. - Escola Politécnica de Universidade de São Paulo
Presentation details
Non - Bituminous High Performance Railroad Traction Motor Gear Lubricant
16:00 - 16:40 Poster
Authors
Bhagwat Singh Nagarkoti
Presenter
NAGARKOTI, B. S. - Stanlubes and Specialities India Pvt Ltd
Presentation details
Effects of friction modifier on stick-slip properties of wet clutch tra nsmission fluid for AWD differentials
16:00 - 16:40 Poster
Authors
Elena Torskaya; Alexei Morozov; Denis V. Mironenko; Yaroslav V. Yarmovich; Vasilina Lapitskaya
Presenter
TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS
Presentation details
MoS2 Shell Microcapsules Assembled from Nanoflower Structures: A Stimuli-Responsive, High-Efficiency Lubricant
16:00 - 16:40 Poster
Authors
Tingmei Wang; Liang Bao; Qihua Wang
Presenter
WANG, T. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Metal-node-dependent lubrication performance and tribochemistry of mono- and bimetallic MOF-based additives
16:00 - 16:40 Poster
Authors
Xiao Cheng; Bin Li; Xinhu Wu
Presenter
Cheng, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Atomistic study of material removal behavior during ultrasonic vibration assisted nanoscratching of single-crystal AlN
16:40 - 17:00 Oral presentation
Authors
Chen Xiao; Linmao Qian
Presenter
XIAO, C. - Southwest Jiaotong University
Presentation details
Mechanistic analysis and data-driven prediction of churning losses in multi-shaft transmission systems
17:00 - 17:20 Oral presentation
Authors
Wenjing Zhang; Dan Guo; Koucheng Zuo
Presenter
ZHANG, W. - Tsinghua University
Presentation details
Predicting the Evolution of Fretting Wear in Spline Couplings Under Representative Conditions
17:20 - 17:40 Oral presentation
Authors
Allan Gichuki
Presenter
GICHUKI, A. - University of Nottingham
Presentation details
Hydrogen-Related Alterations in Aluminum Alloy Piston Materials for Hydrogen Combustion Engines Following Deuterium Irradiation
17:40 - 18:00 Oral presentation
Authors
Yoshiki Matsumoto; Kenji Matsumoto; Yuji Mihara
Presenter
MATSUMOTO, Y. - Tokyo City University
Presentation details
Effect of non-stationary frictional heating on contact of viscoelastic coatings
16:40 - 17:00 Oral presentation
Authors
Elena Torskaya; Fedor Stepanov
Presenter
TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS
Presentation details
Mechanics-Driven Design of Patterned Steel Floor Plates for Enhanced Slip Resistance and Fatigue Durability
17:00 - 17:20 Oral presentation
Authors
Lingqi Qian; Bin Xiao; Daniele Dini
Presenter
QIAN, L. - Imperial College London
Presentation details
Durability study on haptical features of coatings of product and its surface
17:20 - 17:40 Oral presentation
Authors
Prof. Dr. Wolfgang Weinhold
Presenter
WEINHOLD, P. D. W. - Institute of Surface Product Analysis
Presentation details
In-situ measurement of ultra-thin lubricant films under extreme loads in large water-lubricated graphite bearings
17:40 - 18:00 Oral presentation
Authors
Pan Dou; Quanzhong Wu; Tonghai Wu; Thomas Reddyhoff
Presenter
DOU, P. - Imperial College London, Xi'An Jiaotong University
Presentation details
The Spark and the Slide: Investigating Coupled Tribo-Electrical Phenomena in EV Drivetrains
16:40 - 17:00 Oral presentation
Authors
Damien Yiyuan Khoo
Presenter
Damien Yiyuan Khoo - Bruker
Presentation details
Triboelectroscopy: A New Tool for Real-Time Friction–Current Correlation
17:00 - 17:20 Oral presentation
Authors
Demian Abreu; Marcelo Braga dos Santos; José Daniel Biasoli Mello
Presenter
Abreu, Demian - Universidade Federal de Uberlândia
Presentation details
Experimental Characterization of Adhesion and Electroadhesion in Soft Contacts with Simultaneous Contact Area Measurement
17:20 - 17:40 Oral presentation
Authors
Luigi Portaluri; Marco Bruno; Luciana Algieri; Michele Scaraggi
Presenter
PORTALURI, L. - University of Salento
Presentation details
A Transient Electromagnetic Field Model for Non-Ferromagnetic Particles with Motion Effects: Mechanism Analysis and Experimental Validation
17:40 - 18:00 Oral presentation
Authors
Zhehan Zhao; Bin Zhao; Xiqun Lu
Presenter
ZHAO, Bin - Harbin Engineering University
Presentation details
A modified bio-oil from Schizochytrium sp. microalgae as a lubricity improver
16:40 - 17:00 Oral presentation
Authors
Alejandro García Tuero; Guillermo Díez Valbuena; Rubén González Rodríguez; José Luis Viesca Rodríguez; Antolin Hernández Battez
Presenter
Alejandro García Tuero - Universidad de Oviedo
Presentation details
Designing safe and sustainable lubricant additives with reactive molecular dynamics
17:00 - 17:20 Oral presentation
Authors
Stefan J Eder; Hendrik J Ehrich; Lucia Pisarova
Presenter
EDER, S. J. - Austrian Centre of Competence for Tribology - AC2T research GmbH
Presentation details
Tribological Properties of Melamine Long-Chain Alcohol Ester Derivatives as Friction Modifiers at High Temperatures
17:20 - 17:40 Oral presentation
Authors
Wenjing Hu; Jingchun Zhang; Jiusheng LI
Presenter
Wenjing Hu - Shanghai Advanced Research Institute, Chinese Academy of Sciences
Presentation details
Sustainable Energy Transition for Sustainable Tribology: An Assessment using Machine Learning
17:40 - 18:00 Oral presentation
Authors
Henara Lillian Costa; Mitjan Kalin; T V V L N Rao
Presenter
T V V L N Rao - MIT Art, Design and Technology University
Presentation details
A Predictive Framework for Friction and Wear of DLC Coatings Using Literature Data
BOULEFRAKH, K. - Institut national des Science Appliquées de Lyon
Presentation details
Digital Twins of Lubricated Systems and Their Evolution
17:40 - 18:00 Oral presentation
Authors
Filimonas Kaliafetis; Daniele Dini; Suhaib Ardah; James P. Ewen
Presenter
KALIAFETIS, F. - Imperial College London
Presentation details
Tribo-corrosive response of newly developed high entropy ceramic under saline environment
16:40 - 17:00 Oral presentation
Authors
ARUN GURUVAYURAPPAN; Deepak Kumar
Presenter
Guruvayurappan, A. - Indian Institute of Technology Delhi
Presentation details
Shaft Sealing Mechanism for Dual-Axis Motion under High-Pressure Conditions
17:00 - 17:20 Oral presentation
Authors
Yoshitaka NAKANISHI; Haruto Uchizono
Presenter
NAKANISHI, Y. - Kumamoto University
Presentation details
Tailoring the microstructure of MEROX for tribological use in extreme environmental conditions
17:20 - 17:40 Oral presentation
Authors
ARUN GURUVAYURAPPAN; Deepak Kumar
Presenter
KUMAR, D. - Indian Institute of Technology Delhi
Presentation details
Shaft Sealing Mechanism for Low-Speed Motion under High-Pressure Conditions Based on Hydration Boundary Lubrication
17:40 - 18:00 Oral presentation
Authors
Haruto Uchizono; Yoshitaka NAKANISHI
Presenter
H, UCHIZONO. - Kumamoto University
Presentation details
Lubrication at the Electrified Surfaces: Atomistic Insights
16:40 - 17:00 Oral presentation
Authors
Zhaoran Zhu; Yun Zhao; Janet S. S. Wong; Eliane Gendreau; James P. Ewen; Daniele Dini
Presenter
ZHU, Z. - Imperial College London
Presentation details
Lubricant behaviours in electrified tribology
17:00 - 17:20 Oral presentation
Authors
Yun Zhao; Jie Zhang; Hugh A. Spikes; Janet S.S. Wong
Presenter
ZHAO, Y. - Imperial College London
Presentation details
Co-optimizing friction and conductivity of carbon tribofilms on Pt-Au alloys
17:20 - 17:40 Oral presentation
Authors
Frank W. DelRio; Tomas F. Babuska; Kyle R. Dorman; David P. Adams; Alexandra Vaughn; Filippo Mangolini; John F. Curry
Presenter
DELRIO, F.W. - Sandia National Laboratories
Presentation details
Tribocatalytic Carbon Tribofilm for Ultra-Low Wear of PEEK Composites under Fuel Lubrication
17:40 - 18:00 Oral presentation
Authors
Chao Wang; Qingduo Meng; Fuzhi Song; Tingmei Wang; Qihua Wang
Presenter
Chao Wang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Biomimetic Design of MOFs-based Arthritis Lubricating Nanocarriers
16:40 - 17:00 Oral presentation
Authors
Jianxi Liu; Lejie Tian
Presenter
LIU, J. - Northwestern Polytechnical University
Presentation details
Enhancing Tribological Performance and Wettability of Snakeskin-Inspired Surfaces via PDLLA Nanosheets
17:00 - 17:20 Oral presentation
Authors
Mohd Danial Ibrahim; Ir. Sitti Aishah Najamudin; Endu Yollanda Jubilee; Dayang Salyani Abang Mahmod; Pierre Barroy; Anna Cantaluppi; Michael Lejeune; Andreas Zeinert; Yuta Sunami; Abang Mohammad Nizam Abang Kamaruddin; Ahmad Beng Hong Kueh; M Azlan B Masod
Presenter
IBRAHIM, M. D. - Universiti Malaysia Sarawak
Presentation details
Surface Modification of 3D Biomimetic Shark Denticle Structures for Drag Reduction
17:20 - 17:40 Oral presentation
Authors
Zhichao Dong
Presenter
Zhichao Dong - Technical Institute of Physics and Chemistry, Chinese Academy of Sciences
Presentation details
Tribological Assessment of Femtosecond Laser Textured EBM Ti6Al4V-ELI for Biomedical Purposes
17:40 - 18:00 Oral presentation
Authors
Eurico Felix Pieretti; Wagner de Rossi; Martha Simoes Ribeiro; Mauricio David Martins das Neves; Renato Altobelli Antunes; Mara Cristina Lopes Oliveira; Davide Piaggio
Presenter
PIERETTI, E. F. - Intituto de Pesquisas Energéticas e Nucleares
Presentation details
A Multiscale Transient Framework for Mixed Lubrication Modelling in Total Hip Replacement Bearings
16:40 - 17:00 Oral presentation
Authors
Robin Furze; Peter K. Jimack; Michael Bryant; Lin Wang; Mazen Al-Hajjar; Gregory de Boer
Presenter
FURZE, R. - University of Leeds
Presentation details
How Does Ammonia Alter Lubricant Performance: An Experimental and Molecular Dynamics Study on Microstructural Evolution and Viscosity Changes
17:00 - 17:20 Oral presentation
Authors
Yuxuan Sheng; Xing Xu; Xuan Ma
Presenter
Xu,X. - Harbin Engineering University
Presentation details
Influence of roughness frequency cut-off in simulations of lubrication of rough surfaces
17:20 - 17:40 Oral presentation
Authors
Noel Brunetiere; Arthur Francisco
Presenter
BRUNETIERE, N. - Institut Pprime
Presentation details
Simple Models of Viscoelastic Fibrillar Adhesion Between Elastic Solids
17:40 - 18:00 Oral presentation
Authors
michele ciavarella; liang xuanming; wang guangfeng
Presenter
CIAVARELLA, M. - Politecnico di Bari
Presentation details
Crystallinity-Dependent Tribological Behavior of Molybdenum Disulfide: Insights from Experiments and Atomistic Simulations
17:00 - 17:20 Oral presentation
Authors
Abhiram B R; Yue Wang; Ilia Ponomarev; Tomas Polcar
Presenter
WANG, Y. - Czech Technical University
Presentation details
Submicron scale asperity strain hardening
17:40 - 18:00 Oral presentation
Authors
Mark Kuzman; Mitjan Kalin
Presenter
KUZMAN, M. - Univerza v Ljubljani
Presentation details
Regulating Composition, Structure, and Friction Properties of Sputtered MoS₂ Films through Trace Metal (Pt, Au, Cu) Doping
16:40 - 17:00 Oral presentation
Authors
Bin Zhang
Presenter
Bin Zhang - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Influence of MoS₂ content on the tribological behavior of double-transfer solid lubrication systems
17:00 - 17:20 Oral presentation
Authors
Thomas Rey; Eric Papin; Fabrice Dassenoy; Vincent FRIDRICI
Presenter
Thomas Rey - Dipostel, Laboratoire de Tribologie et Dynamique des Systèmes
Presentation details
Tribological properties of DLC coatings in high-pressure gaseous hydrogen
17:20 - 17:40 Oral presentation
Authors
Johnny Dufils; Bogdan Munteanu; Etienne Macron
Presenter
Johnny Dufils - IREIS - HEF Group
Presentation details
Influence of the Steel Disk Topography on the Friction Behavior of Wet Brakes and Clutches
17:40 - 18:00 Oral presentation
Authors
Patrick Strobl; Prof. Dr.-Ing. Katharina Voelkel; Karsten Stahl
Presenter
STROBL, P. - Technical University of Munich, Gear Research Center
Presentation details
Round table International Cooperation
18:00 - 19:30
Seamless collaboration between world-class research institutions and industrial pioneers is vital to advancing tribological innovation and solving complex engineering challenges on a global scale. This roundtable discussion focuses on developing robust international cooperation strategies that effectively align cutting-edge academic tribology research with practical industrial needs.
Moderated by Dr David Carlos Domingos (Director of International Business Development, Fraunhofer Institute for Production Systems and Design Technology, Germany), the session brings together a distinguished panel of experts: Prof. Alvaro Toubes Prata (CEO, Embrapii - Brazilian Company for Industrial Research and Innovation, Brazil), Dr Ing. Andreas Klein (Deputy CEO, FVA - Research Association for Drive Technology, Germany), and Prof. Shirong Ge (China University of Mining and Technology, Beijing, China). Together, they will share key perspectives on overcoming barriers and driving sustainable global innovation in the field.
Presentation details
Tribology and Energy Transition: a Brazilian Perspective
08:30 - 09:30 Plenary Speaker
Authors
Henara Lillian Costa
Presenter
Henara Lillian Costa - Universidade Federal do Rio Grande
Presentation details
Real-world tribology testing is all about the art of deception
09:40 - 10:10 Invited Speaker
Authors
Peter Lee
Presenter
LEE, P. - Southwest Research Institute
Presentation details
Fretting Wear Analysis and Optimization Design of Rope Sheave Lifting Mechanism
10:10 - 10:30 Oral presentation
Authors
yaoshijie; shidongyan; huangrenjie
Presenter
YAOSHIJIE, - Harbin Engineering University
Presentation details
Airborne wear particle emissions from a light aircraft brake
09:30 - 09:50 Oral presentation
Authors
Yurii Tsybrii; Oleksii Nosko; Zbigniew Skorupka; Magdalena Lepicka
Presenter
TSYBRII, Y. - Gdansk University of Technology / Politechnika Gdanska
Presentation details
Manufacturing of hybrid bearing washers using a novel carbide containing alloy
09:50 - 10:10 Oral presentation
Authors
Yusuf Faqiri; Thomas Hassel
Presenter
FAQIRI, Y. - Universität Hannover
Presentation details
Performance Evaluation of transfer learning for surface damage identification in tribological systems
10:10 - 10:30 Oral presentation
Authors
Sina Akhbari; Mahdi Mohammad-Pour; Sara Sharifzadeh; Mahdi Mohammadpour
Presenter
AKHBARI, S. - TriboDENS ltd
Presentation details
Experimental and Numerical Investigation of Biodegradable Hydraulic Lubricant Performance in Axial Piston Pumps
10:30 - 10:50 Oral presentation
Authors
Pedro Martins Ferreira; Jinhwan Lee; Fan Zhang; Lizhi Shang
Presenter
MARTINS FERREIRA, P. - TotalEnergies
Presentation details
Invited talk - Mohamed EL Mansori
09:45 - 10:10 Invited Speaker
Authors
Mohamed El Mansori
Presenter
MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
Presentation details
Effect of Surface Roughness on Scuffing Damage in Rolling-Sliding Contacts
10:30 - 10:50 Oral presentation
Authors
Oliver Fazzio; Ali Ghanbarzadeh; Amir Kadiric
Presenter
FAZZIO, O. - Imperial College London
Presentation details
Numerical investigation of the effects of abrasive particles in lubricating oil on the performance of hydrodynamic journal bearings used in aircraft engine power transmission systems
09:30 - 09:50 Oral presentation
Authors
Haykal BOUAJILA; Jean BOUYER; Pascal Jolly; Balint PAP; James COLE; Younes AOUES
Presenter
BOUAJILA, H. - Université de Poitiers
Presentation details
Bubble-assisted electrochemical MXenes as novel sustainable solid lubricant.
09:50 - 10:10 Oral presentation
Authors
Pierluigi Bilotto; Marko Piljević; Markus Ostermann; Edoardo Marquis; Manel Rodriguez Ripoll; Carsten Gachot
Presenter
BILOTTO, P. - Technische Universität Wien
Presentation details
A Boundary Element formulation for polymer bearings steady-state response
10:10 - 10:30 Oral presentation
Authors
Michele Santeramo; Carmine Putignano; Giuseppe Carbone
Presenter
SANTERAMO, M. - Politecnico di Bari
Presentation details
Graphene oxide as an additive in aqueous lubricants containing glycol and glycerol
High-Throughput Testing & Machine Learning Based Discovery of Novel Alloys
09:40 - 10:10 Invited Speaker
Authors
John F. Curry; Tomas F. Babuska; David Montes de Oca Zapiain; Nathan K Brown; N. Scott Bobbitt; Michael Chandross; Frank W. DelRio; Kyle R. Dorman; David P. Adams; Camille Edwards; Filippo Mangolini
Presenter
CURRY, J.F. - Sandia National Laboratories
Presentation details
Semantically Grounded AI for Tribological Creativity on Demand
10:10 - 10:30 Oral presentation
Authors
Nick Garabedian; Ilia Tanev Bagov
Presenter
GARABEDIAN, N. - datin GmbH
Presentation details
Machine Learning-Based Prediction of Tribological Behavior in In-Situ Reinforced NbC-Fe Metal Matrix Composites
XU, R. - Forschungszentrum Jülich, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Homogenized Response of a Periodically Heterogeneous Elastic Half-Space
10:30 - 10:50 Oral presentation
Authors
Zichen Li; Lucas Frérot
Presenter
LI, Z. - Sorbonne University
Presentation details
Self-lubrication vs. plasticity: MD perspectives on ice and rock friction
09:40 - 10:10 Keynote Speaker
Authors
Martin H. Müser; Sergey V Sukhomlinov
Presenter
Martin H. Müser - Universität des Saarlandes
Presentation details
Vacuum Thermal Treatment for Achieving Superlubricity by Nanodiamond and Hexagonal Boron Nitride on H-DLC Film Surfaces in Dry Nitrogen
10:10 - 10:30 Oral presentation
Authors
HuangPeng
Presenter
HUANGPENG, - Guizhou University (Institute of Technology), Tsinghua University
Presentation details
Disordered Water Molecule Structure Enhances Interfacial Slip
10:30 - 10:50 Oral presentation
Authors
Tongyu Pan; Liran Ma; Jianbin Luo
Presenter
PAN, T. - Tsinghua University
Presentation details
Effect of laser shock peening on tribological performance of 15CrNiMo carburized layer in multi-body friction systems
09:30 - 09:50 Oral presentation
Authors
Guorong Wang; Yang Wang; Xia He; Lin Zhong; Gang Wei
Presenter
WANG, Y. - Southwest Petroleum University
Presentation details
Phosphate coatings for protection of steels surfaces
09:50 - 10:10 Oral presentation
Authors
Rowena Crockett; Ueli Angst; Mohammad Alinezhadfar
Presenter
CROCKETT, R. - Swiss Federal Laboratories for Materials Science and Technology
Presentation details
Thermal isolation effect of DLC coatings on steel substrates
10:10 - 10:30 Oral presentation
Authors
Mitjan Kalin; Elton De Lima Savi; Nelson G. C. Astrath; Luis Carlos Malacarne; Eduardo Victor Bergmann; Tomaž Požar
Presenter
KALIN, M. - University of Ljubljana
Presentation details
Simple Methods for Predicting Mixed and Boundary Friction
09:45 - 10:10 Invited Speaker
Authors
Ian Sherrington; Robert Ian Taylor
Presenter
Ian Sherrington - University of Lancashire
Presentation details
Multiscale Modelling of Rain Droplet Impact on Wind Turbine Blades
10:10 - 10:30 Oral presentation
Authors
Vinayak Ramachandran Nambiar; Joris Degroote; Wim De Waele; Dieter Fauconnier
Presenter
NAMBIAR, V. R. - Ghent University / Universiteit Gent
Presentation details
The formation mechanism, diffusion behavior, properties of the material transfer layer on the rail surface during ultra-high speed sliding electrical contact
Electro-tribological and electrical properties of PAO based lubricants with ZDDP and CNT additives
10:50 - 11:30 Poster
Authors
Andys Hernandez Peña; Juan Pablo Abdelnabe; German Prieto; Walter Roberto Tuckart; Leonardo Israel Farfan Cabrera
Presenter
FARFAN-CABRERA, L. I. - Tecnológico de Monterrey
Presentation details
Thermophysical and Tribological Properties of Sustainable Lubricant Formulations Based on Synthetic Bases and Recycled Vegetable Oils
10:50 - 11:30 Poster
Authors
María Jesús García Guimarey; Andrea Grille Silva; Lucía Sánchez Martínez; María José Pérez Comuñas
Presenter
GUIMAREY, M. J. G. - Universidade de Santiago de Compostela
Presentation details
From Tribological Loss Reduction to System-Level Energy Efficiency: Implications for Industrial Cogeneration Systems
10:50 - 11:30 Poster
Authors
CESAR AUGUSTO FRANCISCO DA SILVA; Christian Davidson Santos Costa; Claudia Assunção Gonçalves Chaves; Felipe Raul Ponce Arrieta; Gilmar Cordeiro da Silva
Presenter
SILVA, C. A. F. D. - Pontifícia Universidade Católica de Minas Gerais, Universidade Federal de Minas Gerais
Presentation details
Sustainable superlubricity: a festival powered by nature
10:50 - 11:30 Poster
Authors
Paul-marie Zubieta-Laborde; Graham L.W. Cross; Frédéric Dubreuil; Maria Isabel De Barros Bouchet
Presenter
ZUBIETA-LABORDE, P.m - Centrale Lyon
Presentation details
Tribologia verde promovendo a igualdade social, racial e de gênero nas áreas de Ciência, Tecnologia, Engenharia e Matemática (STEM).
10:50 - 11:30 Poster
Authors
Hellen Thayana Silva Moreira; Tito Sant Anna Cadaval Jr.; Felipe Kessler; Henara Lillian Costa; Rodrigo Jorge Macedo; Anderson Favero Porte
Presenter
MOREIRA, H. T. S. - Universidade Federal do Rio Grande
Presentation details
Wear and Fatigue Behavior of AM Stainless Steels Exposed to Hydrogen
10:50 - 11:30 Poster
Authors
Bojan Podgornik; Marko Sedlaček; Barbara Šetina Batič; Irena Paulin; Bojan Zajec; Mirjam Bajt Leban; Frantz Martin
Presenter
PODGORNIK, B. - Institute of Metals and Technology
Presentation details
Aqueous superlubricity of a SiC-coated stainless steel sliding against Si3N4
10:50 - 11:30 Poster
Authors
João Vitor Raimundo Silva e Silva; Mateus Imperial Girelli; Franciele Dias de Castro; Henara Lillian Costa; Cherlio Scandian; Nathan Fantecelle Strey
Presenter
SILVA, J. V. R. S. E. - Universidade Federal do Espírito Santo
Presentation details
TriboGirls Project: Biofuels for a Sustainable World
10:50 - 11:30 Poster
Authors
Lorena Rocha Gabriel; LAURA GABRIELLY DA SILVA COSTA; LUANNY KEMILLY DA SILVA HONORATO; MARIA BEATRIZ DE SOUZA SILVA FAUSTINO; MARIA LUIZA DE SOUZA CARDOSO; MAYRA KAROLINY DE SÁ ALVES; SHAYLLA NAYONARA SILVA FIGUEIREDO; Salete Martins Alves; Tawanna Silvestre Araújo da Silva
Presenter
GABRIEL, L. R. - Universidade Federal do Rio Grande do Norte
Presentation details
Effect of Reduced Graphene Oxide nanoparticles on performance of Gearbox Lubrication Systems
10:50 - 11:30 Poster
Authors
DERYKY FLAVIO FERNANDES DA SILVA; Salete Martins Alves; Maycon Guilherme Azevedo De Lima; Lucas Costa de Araújo
Presenter
SILVA, D. F. F. D. - Universidade Federal do Rio Grande do Norte
Presentation details
Analysis of wear modes in gaseous hydrogen network valves
10:50 - 11:30 Poster
Authors
ADILODERNE NOGUEIRA SOUZA FILHO; Matheus Maciel G. Silva; Juliane Ribeiro da Cruz; Larissa Solano de Almeida; Newton Kiyoshi Fukumasu; Roberto Martins de Souza
Presenter
SOUZ FILHO, A. N. - Universidade de São Paulo
Presentation details
Advanced Tribological Testing Machines at TEKNIKER
10:50 - 11:30 Poster
Authors
Amaya Igartua; Borja Zabala; Francesco Pagano; Ichiro Minami; BIHOTZ PINEDO; Jose Maria Seara; JAVIER BARRIGA
Presenter
IGARTUA, A. - Fundación Tekniker
Presentation details
SiToLub project – How tribology should contribute to the sustainability assessment
10:50 - 11:30 Poster
Authors
Francesco Pagano; BORJA ARMENDARIZ; Jonas Hoffmann; Gemma Mendoza; Lucia Pisarova; Ichiro Minami
Presenter
PAGANO, F. - Fundación Tekniker
Presentation details
Utilização de um pino triboacústico para monitorar a formação de tribofilmes em lubrificantes contaminados com etanol.
Design and Application of a Novel Tribo-Electrochemical Cell for In-Situ Hydrogenation Studies
10:50 - 11:30 Poster
Authors
Gregory Favaro; Philippe KEMPE; Yakob Samanes Kruijer; Stefano Mischler; Anna Neus Igual-Muñoz
Presenter
FAVARO, G. - Rtec-Instruments Inc.
Presentation details
Impact of Fretting on Electrical Steel Performance in Electrical Machines
10:50 - 11:30 Poster
Authors
Alessandro Augusto Olimpio Ferreira Vittorino; Marcelo Braga dos Santos; José Daniel Biasoli Mello
Presenter
VITTORINO, A. A. O. F. - Universidade Federal de Uberlândia
Presentation details
Influence of seed origin on Moringa oleifera oil properties
10:50 - 11:30 Poster
Authors
Julia Hummel Della Barba; JANAINA FRACARO DE SOUZA GONÇALVES; Bruna Zappelino Camillo; Beatriz de Andrade Ornellas; Yaskara Fabiola de Monteiro Marques Leite
Presenter
ZAPPELINO CAMILLO, B. - Centro Universitário SENAI SC
Presentation details
Reciprocating sliding wear of carbon fiber reinforced PEEK
10:50 - 11:30 Poster
Authors
Patrick Mothé Ferreira; João Vitor Raimundo Silva e Silva; Rubson Mação Camporez; Cherlio Scandian; Nathan Fantecelle Strey
Presenter
CAMPOREZ, R. M. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
Unraveling Fretting Wear Mechanisms of AISI 52100 Steel in Electrified Vehicle Tribosystems
10:50 - 11:30 Poster
Authors
Mohamed Kamal Ahmed Ali; Qiangliang Yu; Bin Li
Presenter
YU, Q. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Laser Cladding Effects on Abrasive Wear Resistance of Hardox 400 Steel
10:50 - 11:30 Poster
Authors
Dawid Romek; Dariusz Ulbrich; Jarosław Selech; Piotr Banaś
Presenter
ULBRICH, D. - Poznan University of Technology
Presentation details
Sand-Slurry Erosion of Corrosion-Resistant Alloys at a Shallow Impact Angle
10:50 - 11:30 Poster
Authors
Natasha Vieira Dantas; Juliana Souza de Oliveira; Rubson Mação Camporez; Sergio Souto Maior Tavares; Cherlio Scandian; Nathan Fantecelle Strey
Presenter
DANTAS, N. V. - Universidade Federal do Espírito Santo
Presentation details
Abrasive and erosive wear caused by iron ore slurries with varied silica content on high chromium cast iron: influence of iron ore geology
10:50 - 11:30 Poster
Authors
Paulo Ricardo Barbosa; Renato Chaves Pereira da Silva; Lucas Diniz Rodrigues Pereira; Gustavo Augusto Rosa Santos; Adilson Rodrigues da Costa
Presenter
BARBOSA, P. R. - Universidade Federal de Ouro Preto
Presentation details
Abrasiveness and Geology of Brazilian Iron Ores: Considerations Based on the Miller Abrasiveness Test
10:50 - 11:30 Poster
Authors
Paulo Ricardo Barbosa; Adilson Rodrigues da Costa
Presenter
BARBOSA, P. R. - Universidade Federal de Ouro Preto
Presentation details
Surface Integrity in Micromilling of NiTinol for Medical Applications
10:50 - 11:30 Poster
Authors
JOSENILTON DOS SANTOS LOPES; Thaise Alonso; Marcus Vinícius de Oliveira; Milla Caroline Gomes; Rahul Davis; Carlos José de Araújo; Márcio Bacci da Silva
Presenter
LOPES, J. D. S. - Universidade Federal de Uberlândia
Presentation details
Assessment of abrasive wear resistance of RAVUR250HR, SAE1045, and HSLA501 steels
10:50 - 11:30 Poster
Authors
Fábio Dian Murari; Herbert Christian Borges; Edwaldo Ferreira Brandao
Presenter
MURARI, F. D. - USIMINAS
Presentation details
Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions
10:50 - 11:30 Poster
Authors
Francisco Briones; BARBARA VALVERDE; RICARDO DONAIRE; Álvaro González; Federico Antico; Carola Martínez Ugalde
Presenter
BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso
Presentation details
Effect of Deformation-Induced Changes in Elasto-Plastic Properties on Galling Resistance of AISI 304 Stainless Steel
10:50 - 11:30 Poster
Authors
Andres Esteban Romero; Gaston Romero Pietrafesa; Fernando Buezas; Walter Roberto Tuckart; Germán Prieto
Presenter
PRIETO, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
Presentation details
Bringing the Dead Zone to Life: In Situ Visualization of Interfacial Stagnation in Metal Cutting
Comparative Study of the Mechanical and Tribological Properties of Recycled and Conventional Filaments in 3D Printing
10:50 - 11:30 Poster
Authors
Sabrinna Miranda de Moraes; Juliana Ricardo de Souza; Ângelo da Silva Carneiro; Ana Tereza de Abreu Lima; Adiana Nascimento Silva
Presenter
SOUZA, J. R. D. - Universidade Federal Rural do Semi
Presentation details
Innovative Green Ingredients for Sustainable Automotive Brake Friction Materials
10:50 - 11:30 Poster
Authors
Ana Paula Gomes Nogueira; Pietro Tonolini; Giovanni Straffelini; Davide Carlevaris; Gustavo Gehlen
Presenter
NOGUEIRA, A. P. G. - Brembo NV
Presentation details
Hardness and alumina content determine the Low-Stress Sliding Abrasion wear in commercial ceramics for transfer chute linings?
10:50 - 11:30 Poster
Authors
Letícia Dias Batista; Maria Aparecida Pinto; Jose Jimmy Penagos; Cristian Camilo Viáfara Arango; Dalila Chaves Sicupira
Presenter
DIAS-BATISTA, L. - Instituto Tecnológico Vale
Presentation details
Comparison of Abrasive Wear in Conveyor Belt Splices Using Two Experimental Methods
10:50 - 11:30 Poster
Authors
NATALIA LOPES ZINATO; Yeda Luisa dos Santos; Jose Jimmy Penagos; Rafael Dias Pereira; Patrick Falqueto
Presenter
ZINATO, N. L. - Universidade Federal de Ouro Preto
Presentation details
Research on Image Algorithm for the Extraction of the Motion Trajectory of Bearing Cages
10:50 - 11:30 Poster
Authors
Fei Li; Yan Bei; Banheng Ruan; Shifu Zhang
Presenter
YAN,B. - Chang'an University
Presentation details
Tribological Interaction in W–Cu Sintered Composites: Role of Cu Nanoflakes in W Particle Adhesion and Resistance to Particle Detachment
10:50 - 11:30 Poster
Authors
Sergio Sauceda Martínez; Francisco Briones; Nicolás Ignacio Araya Rivera; Sheila Lascano Farak; Yovany Oropesa Márquez; Cristina Arévalo Mora
Presenter
BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso
Presentation details
Grinding Performance of a Structured Wheel with Internal Cooling Channels
10:50 - 11:30 Poster
Authors
Sharlane Maria Costa; Paulina Capela; João Eduardo Ribeiro; Mário Antônio Caixeiro Castro Pereira; Delfim Fernandes Soares
Presenter
SOARES, D. F. - Associate Laboratory, Center for MicroElectromechanical Systems
Presentation details
Tribological Characterization of Bi-Functional Abrasive Composite
10:50 - 11:30 Poster
Authors
Paulina Araújo Capela; Sharlane Maria Costa; Márcia Correia; José Manuel Ramos Gomes; José Carlos Fernandes Teixeira; Mário Antônio Caixeiro Castro Pereira; Delfim Fernandes Soares
Presenter
CAPELA, P. A. - University of Minho
Presentation details
Sclerometry as a method to evaluate the grindability of HSS applied for tap tools
10:50 - 11:30 Poster
Authors
Saimon Vendrame; Déborah de Oliveira; Washington Martins Silva Junior; Eduardo Carlos Bianchi; Nathan Fantecelle Strey; Alisson Rocha Machado; Rosemar Batista da Silva
Presenter
STREY, N. F. - Universidade Federal do Espírito Santo
Presentation details
Investigating Bearing Surface Damage via Coupled Electro-Thermal Analysis
10:50 - 11:30 Poster
Authors
Hamed Eshraghi; Peyman Havaej; Dieter Fauconnier
Presenter
ESHRAGHI, H. - Flanders Make, Ghent University / Universiteit Gent
Presentation details
Blickensderfer’s methodology in a field wear test to evaluate wear-resistant materials for transfer chute linings
10:50 - 11:30 Poster
Authors
Jose Jimmy Penagos; Cristian Camilo Viáfara Arango; Renato Chaves Pereira da Silva; Luis Alfredo Acevedo Suarez; Christian Mariani Lucas dos Santos; Wilson Ribeiro Machado; Marcel Roberto Castanheira; Felipe Ribeiro da Fonseca
Presenter
PENAGOS, J. J. - Instituto Tecnológico Vale
Presentation details
Abrasive wear of conveyor belt rubber materials used in an iron ore processing plant
10:50 - 11:30 Poster
Authors
Adriano Souza Da Silva; NATALIA LOPES ZINATO; Yeda Luisa dos Santos; Thalia Gomes dos Santos; Cristian Camilo Viáfara Arango; Jose Jimmy Penagos
Presenter
SANTOS, Y. L. D. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
Presentation details
Experimental approaches to system-level identification of tribological parameters in automotive friction torsional vibration dampers
10:50 - 11:30 Poster
Authors
Michał Formela; Jacek Łubiński; Małgorzata Szczerska
Presenter
FORMELA, M. T. - Eaton Mobility Group, Gdansk University of Technology / Politechnika Gdanska
Presentation details
A CFD–DEM simulation study of abrasive wear in iron ores slurry controlvalves
10:50 - 11:30 Poster
Authors
Leandro Ferreira Borba Lima; Eleir Mundim Bortoleto; Jose Jimmy Penagos
Presenter
LIMA, L. F. B. - Instituto Tecnológico Vale
Presentation details
Experimental and Numerical Analysis of the Influence of Surface Morphology on the Tribological Behavior and Contact Mechanics of Polyurethane Rail Pads
10:50 - 11:30 Poster
Authors
Angélica de Fátima Nogueira Vicente; Iara Melo da Silva; Luciano de Oliveira; Eleir Mundim Bortoleto
Presenter
VICENTE, A. D. F. N. - Instituto Tecnológico Vale
Presentation details
Tool Wear Mechanisms when turning Ti-6Al-4V alloy
10:50 - 11:30 Poster
Authors
Patrick Kwon
Presenter
KWON, P. - San Diego State University
Presentation details
Influence of Surface Pre-Treatment on Wear Resistance of Patinas Formed on Weathering Steel under Atmospheric Exposure
10:50 - 11:30 Poster
Authors
Hadille Emanuele Gonçalves Mendes; Felipe Kevin Correia Luz; Márcio L. A. Cunha; Marlise Moreira; José Henrique Alano; Henara Lillian Costa
Presenter
LUZ, F. K. C. - Universidade Federal do Rio Grande
Presentation details
Impact of grinding stone topography on rail surface integrity
10:50 - 11:30 Poster
Authors
Lucas Biazon Cavalcanti; Scott Dyball; Roger Lewis
Presenter
BIAZON, L. - University of Sheffield
Presentation details
A preliminary research of laser DED repairing and its mechanical properties aiming remanufacturing
10:50 - 11:30 Poster
Authors
Yuri TEI; Yoshihisa HARADA; Satoshi KAJINO; Miki NAKANO; Hiroki MANO
Presenter
TEI, Y. - Japan Advanced Institute of Science & Technology
Presentation details
Tribo-rheological and thermal characterization of vegetable oil in water microemulsions as a potential water-based fluid for metalworking applications
11:30 - 11:50 Oral presentation
Authors
JAVIER A. FRIAS-FLORES; ESTEBAN F. MEDINA-BAÑUELOS; Ezequiel A. Gallardo-Hernández; Benjamín M. Marín-Santibañez
Presenter
J. A. FRIAS-FLORES - Instituto Politécnico Nacional
Presentation details
Tribomechanical Evaluation of FeCrNiMo Alloy Reinforced with WC Deposited by L-DED
11:50 - 12:10 Oral presentation
Authors
Flavio Ghedin Neto; Richard de Medeiros Castro; Renato Camponogara Panziera; Milton Pereira; Clauber Roberto Melo Marques; Israel da Silva Miranda; Jurandir Marcos Sá de Sousa
Presenter
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
Presentation details
Atomic material removal mechanism in ultra-precision chemical mechanical polishing of bearings and gears
HUANG, S. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
Presentation details
Erosion performance of AlSi-based abradable coating
12:10 - 12:30 Oral presentation
Authors
Natália de Oliveira Sousa; Bruno Edu Arendarchuck; Francisco Rivadeneira; Barry Barnett; Kaue Bertuol; Pantcho Stoyanov
Presenter
SOUSA, N. D. O. - Concordia University Montreal
Presentation details
Mo(VI) dithiocarbamate friction behavior in steel-steel contact under boundary lubrication
Biomimetic “soft-hard-soft” gradient interface engineering: multi-stage structural synergies and dual-layer tribofilm modulation for enhanced tribological properties of CF/PTFE composites
16:00 - 16:40 Poster
Authors
Yue Zhang; Mingming Yang; Zhaozhu Zhang; Weimin Liu
Presenter
YANG M - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Vat photopolymerization 3D printable self-lubricating polyimide
16:00 - 16:40 Poster
Authors
Xiaolong Wang
Presenter
WANG, X. - Lanzhou Institute of Chemical Physics
Presentation details
Lubrication materials for advanced nuclear reactors
16:00 - 16:40 Poster
Authors
Peng Wang; Liqiang Chai; Beibei Zhang; Weimin Liu
Presenter
WANG, P. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Synergistic Lubrication and Wear Mechanisms of WS2/CaF2 Reinforced lmpregnated Diamond Bit Matrix for Lunar Dry Drilling under High-Temperature Vacuum Conditions
16:00 - 16:40 Poster
Authors
Songcheng Tan; Aikedai Saimaiti; Xiaohong Fang
Presenter
TAN, S. - China University of Geosciences
Presentation details
Study on Regulation of Superlubricity Performance of Hydrogenated Amorphous Carbon-based Films by Trace Doping
16:00 - 16:40 Poster
Authors
Guangan Zhang
Presenter
ZHANG, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
High temperature lubricity and mechanism of novel glass lubricant
16:00 - 16:40 Poster
Authors
Long Wang
Presenter
WANG, L. - Northwestern Polytechnical University
Presentation details
Design of an Experimental Setup for Quantifying High-Velocity Droplet Impact Forces
16:00 - 16:40 Poster
Authors
Jean Carlos Poletto; Patrick De Baets; Dieter Fauconnier
Presenter
POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent
Presentation details
Abrasive Wear of High Density Polyethylene for Offshore Applications
16:00 - 16:40 Poster
Authors
Karoline Sales de Oliveira Gusmão; Thiago Doca
Presenter
Sales de Oliveira, K. - University of Brasilia
Presentation details
Evolution of Friction and Wear Mechanisms of Aerospace sealing Rubber under Thermal–Oxidative Aging
16:00 - 16:40 Poster
Authors
Qiandiao Wei; Jian Wu; Zhihao Chen; Benlong Su; Youshan Wang
Presenter
WU, J. - Harbin Institute of Technology, Harbin Institute of Technology at Weihai
Presentation details
Solid Particle Erosion of Plasma-nitrided DLC-coated Superduplex 2507 Stainless Steel and Inconel 718
16:00 - 16:40 Poster
Authors
Bruno Corveto Bragança; Julia Mazzoni Moura; Rubson Mação Camporez; Newton Kiyoshi Fukumasu; ANDRÉ PAULO TSCHIPTSCHIN; Nathan Fantecelle Strey; Cherlio Scandian
Presenter
BRAGANÇA, B. C. - Universidade Federal do Espírito Santo
Presentation details
Design of Novel Grease-Based Ultralow Friction and Wear Systems and Their Study in Space Lubrication
16:00 - 16:40 Poster
Authors
Liqiang Zhang; Daoai Wang
Presenter
Zhang. L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Regulation of High-Temperature Adhesion and Static Friction Behaviors of Superalloys via Surface Topography Control
16:00 - 16:40 Poster
Authors
Yuhui Zou; Bingxue Cheng; Tianmin Shao
Presenter
ZOU, Yuhui - Tsinghua University
Presentation details
Scratch Adhesion Resistance of DLC Coatings on 2507 Superduplex Stainless Steel and Inconel 718 by PVD and PECVD
16:00 - 16:40 Poster
Authors
Rubson Mação Camporez; Fernando Gante Maia de Sousa; Fagner Marçal Andrade; Newton Kiyoshi Fukumasu; ANDRÉ PAULO TSCHIPTSCHIN; Roberto Martins de Souza; Dante Ferreira Franceschini Filho; Nathan Fantecelle Strey; Cherlio Scandian
Presenter
SOUSA, F. G. M. - Universidade Federal do Espírito Santo
Presentation details
Engineered Surfaces and Functional Additives for Extreme-Condition and Sustainable Tribological Applications: A Review
Correlating Vibration Analysis to the Development of Gear Pitting
16:00 - 16:40 Poster
Authors
Djordy Van Maele; Jean Carlos Poletto; Dieter Fauconnier; Patrick De Baets
Presenter
MAELE, D. V. - Flanders Make, Ghent University / Universiteit Gent
Presentation details
Exploring the relationship between powder tribology and aerodynamic performance of DPI formulations
16:00 - 16:40 Poster
Authors
MICHELLE ALVARES SARCINELLI; Lara Melo Campos; Luany Gabrielle de Barros Ferreira; Arthur da Silva Cravo; Marcelo Henrique Cunha Chaves; Francisco Alexandrino Júnior; Beatriz Ferreira de Carvalho Patricio; Helvécio Vinícius Antunes Rocha
Presenter
ROCHA, H. V. A. - Fundação Oswaldo Cruz
Presentation details
Design and Validation of a Small-Scale Tribological Rig for Segmented Carbon Seal Materials
16:00 - 16:40 Poster
Authors
Victor Vaurek Dimbarre; Kaue Bertuol; Barry Barnett; Pantcho Stoyanov
Presenter
DIMBARRE, V. V. - Concordia University Montreal
Presentation details
Practical considerations for employing Vision Systems in Gear Monitoring
16:00 - 16:40 Poster
Authors
Jean Carlos Poletto; Djordy Van Maele; Dieter Fauconnier; Patrick De Baets
Presenter
POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent
Presentation details
Electrifying tribometry for lubricant developments used in electrified drive technologies
16:00 - 16:40 Poster
Authors
Tushar Khosla; Krishnamurti Singh; Mathias woydt
Presenter
KHOSLA, T. - Rtec Instruments Inc.
Presentation details
An Improved Local Method for the Dynamic Simulation and Accurate Prediction of Friction Torque in Deep Groove Ball Bearings
16:00 - 16:40 Poster
Authors
Bo Wen; Li Junqing; Ma Shuaijun; Xiaoya Zhang; Ke Yan; Hong Jun
Presenter
WEN, B. - Xi'An Jiaotong University
Presentation details
Tribological Monitoring Using an LR Sensor Applied to the Detection of Metallic Particles in Pure Mineral Oil
16:00 - 16:40 Poster
Authors
Eduardo Moreira Bezerra; Aparecido Carlos Gonçalves
Presenter
BEZERRA, E. M. - Universidade Estadual Paulista
Presentation details
Continuous Measurement of Cage Wear in Cylindrical Roller Bearings
16:00 - 16:40 Poster
Authors
Daisuke Suzuki
Presenter
SUZUKI, D. - Railway Technical Research Institute
Presentation details
Tribology Driven Failure of a Stepless Hydraulic Capacity Control (HydroCOM®) System in a 3.4 MW Hydrogen Reciprocating Compressor
16:00 - 16:40 Poster
Authors
Sarfrazullah Nawaz Sayed; Deepjyoti Baruah
Presenter
SAYED, S. N. - Numaligarh Refinery Limited
Presentation details
Effect of lubricant viscosity on a boundary lubrication test
16:00 - 16:40 Poster
Authors
Rafael Nunes da Silva; Alice do Amaral Rodrigues; Régis Henrique da Silva Souza; Carlos M.C.G. Fernandes; Ney Francisco Ferreira; Patric Daniel Neis; Germano Lasch
Presenter
SILVA, R. N. D. - Universidade Federal do Rio Grande do Sul
Presentation details
On-site in Situ and Operando Research on Real Contact Area of Friction
16:00 - 16:40 Poster
Authors
AijieXu; Sam Dillavou; Shmuel M. Rubinstein; Shizhu Wen; Yu Tian
Presenter
AIJIEXU, - SINOPEC Research Institute of Petroleum Processing Co., Ltd., Beijing 100083, P. R. China
Presentation details
Micro-abrasive Wear in PTFE and PTFE Composites for Ball Valve Seats
16:00 - 16:40 Poster
Authors
Diógenes Barbosa Teles; Régis Henrique da Silva Souza; Patric Daniel Neis; María Cristina Moré Farias; Ney Francisco Ferreira
Presenter
TELES, D. B. - Universidade de Caxias do Sul
Presentation details
Ball cratering evaluation of epoxy and ECTFE coatings on carbon steel under abrasive conditions
16:00 - 16:40 Poster
Authors
Diógenes Barbosa Teles; María Cristina Moré Farias; Carlos Roberto Luna-Domínguez; Jorge Humberto Luna-Domínguez; Ronaldo Câmara Cozza
Presenter
TELES, D. B. - Universidade de Caxias do Sul
Presentation details
Contact pressure tribological effect on Bi2S3-MoS2 soft coatings
16:40 - 17:00 Oral presentation
Authors
Gaston Romero Pietrafesa; Martina Pradilla; Walter Roberto Tuckart; Germán Prieto
Presenter
ROMERO PIETRAFESA, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
Presentation details
Flow Transport and Film Evolution of Lubricant on a Rotating Disk Across a Broad Temperature Region
17:00 - 17:20 Oral presentation
Authors
Chunhui Wei; Daniel Nelias; Valery Botton; Wei Wu; Yi Liu
Presenter
WEI, C. - Beijing Institute of Technology
Presentation details
Effect of Sodium Sulfate on Wear of Stainless Steel in High-Temperature and High-Pressure Water-Containing Ethanol Environment
Dynamics of Cage-free Ball Bearings under acceleration condition
17:40 - 18:00 Oral presentation
Authors
Wei Cao; Cheng Chang
Presenter
CAO, W. - Sichuan University
Presentation details
Atomic-scale Tribochemical Differences During Chemical Mechanical Polishing of Copper and Silicon in the Integrated Circuits Manufacturing
16:40 - 17:00 Oral presentation
Authors
Lifei Zhang; Xinchun Lu
Presenter
ZHANG, L. - Tsinghua University
Presentation details
Tribological Behavior and Iron Ore Flow on UHMWPE Materials for Truck Body Liners
17:00 - 17:20 Oral presentation
Authors
Kamila de Fatima Costa da Silva; Thalia Gomes dos Santos; Reydner Lucas Tobias; Eleir Mundim Bortoleto; Cristian Camilo Viáfara Arango; Gustavo Tressia
Presenter
SILVA, K. F. C. - Instituto Tecnológico Vale
Presentation details
Improved high-temperature solid particle erosion resistance of Hadfield steel by boriding
17:20 - 17:40 Oral presentation
Authors
Andys Hernandez Peña; César David Reséndiz Calderón; Gabriel Caballero Bustamante; Leonardo Israel Farfan Cabrera
Presenter
Hernández-Peña, A. - Tecnológico de Monterrey
Presentation details
The impact of spin on elastohydrodynamic contacts for traction: A Theoretical and Experimental Investigation of Ball-Disc Contact
17:40 - 18:00 Oral presentation
Authors
Chiara Cupertino; Francesco Bottiglione; Giuseppe Carbone
Presenter
CUPERTINO, C. - Politecnico di Bari
Presentation details
Flexible, transparent and conductive silver line electrodes fabricated using surface energy-directed assembly process on polyethylene naphthalate substrates
18:00 - 18:20 Oral presentation
Authors
Yihuan Wang; Zhimin Chai
Presenter
WANG, Y. - Tsinghua University
Presentation details
Lubricant inerting – base oil degradation in low oxygen atmosphere
16:40 - 17:00 Oral presentation
Authors
Lenon Medina Ferreira; Henara Lillian Costa Murray; Janet S. S. Wong; Hugh A. Spikes
Presenter
FERREIRA, L. M. - Imperial College London
Presentation details
Effect of hydrogen on the tribological properties of CoCrFeMnNi HEA
17:00 - 17:20 Oral presentation
Authors
Aitor Ayerdi; Andrea Aginagalde; Wilson Tato; Iñaki Hurtado; Pablo Garcia-Michelena; Rémi Piegard; Daniella Guedes; Alaitz Zabala
Presenter
AYERDI, A. - Universidad de Mondragon Mondragon Unibertsitatea
Presentation details
Impact of Methanol Combustion on Piston Assembly Friction: A Combined Simulation and Experimental Study
17:20 - 17:40 Oral presentation
Authors
Yelvin Ragimov; Andreas Götze; Georg Jacobs; Merle Reimers; Frank Atzler
Presenter
RAGIMOV, Y. - MSE - RWTH Aachen University
Presentation details
Electrical Properties of Tribofilms formed at Electrified Interfaces
17:40 - 18:00 Oral presentation
Authors
Seong H. Kim
Presenter
KIM, S. H. - Pennsylvania State University
Presentation details
On the effect of hydrogen absorption on wear behavior of steel 42CrMo4 in different microstructural states
18:00 - 18:20 Oral presentation
Authors
Stefanie Hanke; David Alejandro Diaz Yanez; Morteza Abedini
Presenter
David Diaz - Universität Duisburg Essen
Presentation details
Do MXenes miss their MAX phases? Study on surface adhesion and interaction of Ti3C2Tx MXenes on porous and laser textured substrates
16:40 - 17:00 Oral presentation
Authors
Hakan Göçerler; Pierluigi Bilotto; Agnieszka Maria TOMALA; Andreas Rosenkranz; Michael Naguib; Carsten Gachot
Presenter
Göçerler, H - Technische Universität Wien
Presentation details
Synergistic Lubrication and Antibacterial Efficacy in Microgel-Reinforced Hydrogel Coatings
17:00 - 17:20 Oral presentation
Authors
Dichu Xu; Nan Liu; Zenghua Xie
Presenter
XU, D. - Beihang University (Beijing University of Aeronautics and Astronautics)
Presentation details
Solid lubrication in an insect joint: a comprehensive experimental and numerical investigation
17:20 - 17:40 Oral presentation
Authors
Carmine Putignano; Konstantin Nadein; Julian Thomas; Stanistav Gorb
Presenter
PUTIGNANO, C. - Politecnico di Bari
Presentation details
MXene-Reinforced CoCrMo Composites for Advanced Biotribological Applications
17:40 - 18:00 Oral presentation
Authors
David Necas; Daniel Nemecek; Jan Radil; Max Marian; Martin Vrbka; Ivan Krupka; Martin Hartl
Presenter
NECAS, D. - Brno University of Technology
Presentation details
Active control of finger sliding friction with different surface roughness in SDS solutions for underwater surface haptics
18:00 - 18:20 Oral presentation
Authors
Xue Zhou
Presenter
ZHOU, X. - Sichuan University
Presentation details
Modelling Hair Friction in the Presence of Additives
16:40 - 17:00 Oral presentation
Authors
Pietra Martina Cerqueira Diaz; Erik Weiand; James P. Ewen; Stefano Angioletti-Uberti; Yuri Roiter; Jessa Meyers; Dariush Hosseinpour; Francisco Rodriguez-Ropero; Daniele Dini
Presenter
CERQUEIRA DIAZ, P. M. - Imperial College London
Presentation details
Compatibility of 2D MoSe₂ and WSe₂ Nanoparticles with Oil Compositions: Impact on Wear Reduction
17:00 - 17:20 Oral presentation
Authors
Kostyantyn Grinkevych; Natalia Konih-Ettel; Ostap Zgalat-Lozynskyi; Roman Nevshupa
Presenter
GRINKEVYCH, K. - I.M. Frantsevich Institute for Problems of Materials Science
Presentation details
Adhesive contact mechanics via a self-consistent body-force formulation
17:20 - 17:40 Oral presentation
Authors
Musuvathi Santhaparipoornam Bobji; Uzair Iqbal
Presenter
M S Bobji - Indian Institute of Science, Bengaluru
Presentation details
Enhancement of DLC Tribology Using Graphene and Nanodiamond under Solid and Water-Lubricated Conditions
17:40 - 18:00 Oral presentation
Authors
Yuki Hirata; Taiki Okita; Ruixi Zhang
Presenter
HIRATA. Y - Institute of Science Tokyo
Presentation details
Surface Tension Effect in Nano-Indentation of Soft Materials (Submission for the poster session only)
Mechanism of the Shear-Induced Formation of Metastable Copper Sulfide Tribofilms
17:40 - 18:00 Oral presentation
Authors
Wilfred T Tysoe
Presenter
Wilfred T Tysoe - University of Wisconsin-Milwaukee
Presentation details
Residual Stress and Topography Effects on Rolling Contact Fatigue Behavior
18:00 - 18:20 Oral presentation
Authors
Gilberto Martins de Oliveira Gomes; Ronnie Rodrigo Rego; Lucas Neves; Naiane Stefani de Souza; Giovanni Franco Ribeiro; André Santana
Presenter
GOMES, G. M. D. O. - Instituto Tecnológico de Aeronáutica
Presentation details
High-temperature (300 °C) Sliding Wear Behavior of Nanostructured High-Strength Steel: Effect of Heat Treatment Mode
18:20 - 18:40 Oral presentation
Authors
VASYL IEFREMENKO; Yuliia Chabak; Ivan Petrišinec; Mikhailo Brykov
Presenter
IEFREMENKO, V. - Institute of Materials Research, Slovak Academy of Science
Presentation details
A multiscale dynamic analysis method for jointed structures: from surface topography to nonlinear dynamic response
16:40 - 17:00 Oral presentation
Authors
Chao Xu; Huiyi Yang; DANIELE BOTTO
Presenter
XU, C. - Northwestern Polytechnical University
Presentation details
Simulation and Experimental Validation of Bearing Creep simulation considering change of COF
17:00 - 17:20 Oral presentation
Authors
Loc Duc Le; Denny Knabner; Alexander Hasse
Presenter
Loc Duc Le - Technische Universität Chemnitz
Presentation details
A Reduced-Order Disc Brake Surrogate with Rate-Dependent Hysteretic Friction Producing Stick–Slip
17:20 - 17:40 Oral presentation
Authors
Husain Kanchwala; Soumyabrata Maiti
Presenter
KANCHWALA, H. - Indian Institute of Technology Delhi
Presentation details
The influence of size and Poisson's ratio on the stiffness of quasi conformal spherical contacts
17:40 - 18:00 Oral presentation
Authors
Alberto Betti; Paola Forte; Enrico Ciulli
Presenter
CIULLI, E. - Università di Pisa
Presentation details
Impact of blade root joints on the dynamics of intrinsically mistuned bladed disks
18:00 - 18:20 Oral presentation
Authors
Umidjon Usmanov; Christian Maria Firrone; Giuseppe Battiato
Presenter
Usmanov, U. - Politecnico di Torino
Presentation details
Complete Stribeck Curve Prediction by Applying Machine Learning to Acoustic Emission Data from a Lubricated Sliding Contact
18:20 - 18:40 Oral presentation
Authors
Song Yang; Robert Gutierrez; Thomas Kirkby; Hafedh Bouassida; Marc Hilbert; Min Yu; Thomas Reddyhoff
Presenter
YANG, S. - Imperial College London
Presentation details
Molecular Simulations to Screen Additives for Future Fuels and Lubricants
16:40 - 17:00 Oral presentation
Authors
Jeevan S. Purewal; Carlos Corral-Casas; James P. Ewen; Mark Brewer; Alastair Smith; Daniele Dini
Presenter
PUREWAL, J. S. - Imperial College London
Presentation details
The Stick-Slip to Superlubricity Transition: Atomic-Scale Evidence of Graphene Oxide Tribofilm on Nitride Ceramics
17:00 - 17:20 Oral presentation
Authors
Huajie Tang; Xinchun Chen; Jianlin Sun; Jianbin Luo
Presenter
TANG, H. - Tsinghua University, University of Science & Technology Beijing
Presentation details
Bubble Mechanisms in Antifoam Containing Oils
17:20 - 17:40 Oral presentation
Authors
Thomas Reddyhoff; Paul-Anaël Pogu; Li Shen; Eliane Gendreau
Presenter
REDDYHOFF, T. - Imperial College London
Presentation details
Tribological Performance of MWCNT Nanolubricants for Electric Vehicle Transmissions
17:40 - 18:00 Oral presentation
Authors
Lucas Costa de Araújo; DERYKY FLAVIO FERNANDES DA SILVA; Salete Martins Alves
Presenter
ARAÚJO, L. C. D. - Universidade Federal do Rio Grande do Norte
Presentation details
Tribological Performance of Water-Based Lubricants at High Speeds
18:00 - 18:20 Oral presentation
Authors
WengHong Fong; Amir Kadiric
Presenter
FONG, W. - Imperial College London
Presentation details
Macro-Superlubricity on Steel under High Sliding and Contact Pressure
18:20 - 18:40 Oral presentation
Authors
Hanglin Li; Xudong Sui; Carsten Gachot; Jiusheng LI
Presenter
LI, H. - Shanghai Advanced Research Institute, Chinese Academy of Sciences
Presentation details
Fluid leakage in seals: An experimental and numerical analysis
16:40 - 17:00 Oral presentation
Authors
Carmine Putignano; Michele Santeramo; Stefan Krenn; RAUSEO VALERIO EUPLIO; Dario Scarati; Giuseppe Carbone
Presenter
PUTIGNANO, C. - Politecnico di Bari
Presentation details
Measurement-resolution bias in post-grinding rail RCF simulations
17:00 - 17:20 Oral presentation
Authors
Wiyao Edjeou; Per Bergström; Roland Larsson; Per-Olof Larsson-Kråik; Andreas Almqvist
Presenter
ALMQVIST, A. - Lulea University of Technology / Luleå tekniska universitet
Presentation details
Friction dynamics in the presence of a third body - Application to earthquakes
17:40 - 18:00 Oral presentation
Authors
Guilhem Mollon; athalie Casas
Presenter
MOLLON, Guilhem - Institut national des Science Appliquées de Lyon
Presentation details
Programmable Torque Transmission Using Inflatable Interlocking Metainterfaces
18:00 - 18:20 Oral presentation
Authors
Nikolaos Rogkas; Ioannis P. Iliopoulos; Stephanos Mpalas; Pavlos Zalimidis; Vasilios Spitas
Presenter
ROGKAS, N. - National Technical University of Athens
Presentation details
Gala Dinner
19:30 - 22:30
Gala Dinner
Presentation details
Tribology for Sustainable Development
08:30 - 09:30 Plenary Speaker
Authors
Noritsugu Umehara
Presenter
Umehara N - Nagoya University
Presentation details
Turning the Tribo-system into a Tribo-Test
09:40 - 10:10 Keynote Speaker
Authors
Steven Shaffer
Presenter
SHAFFER, S. - Shaffer Tribology Consulting formerly Bruker Nanosurfaces and Battelle Memorial Institute
Presentation details
Influence of the dynamic characteristics of the tribometer on the reliability of the results
10:10 - 10:30 Oral presentation
Authors
Amílcar Ramalho; Luis Vilhena
Presenter
RAMALHO, A. - Universidade de Coimbra
Presentation details
Elastohydrodynamic lubrication friction dependence on energy density and build orientation for SLM printed AlSi10Mg and 18Ni300
09:30 - 09:50 Oral presentation
Authors
Urban Klanjscek; Mitjan Kalin
Presenter
KLANJSCEK, U. - University of Ljubljana
Presentation details
Development of a low-stress abrasive wear test to simulate mild wear conditions in commercial materials for transfer chute linings
09:50 - 10:10 Oral presentation
Authors
Letícia Dias Batista; Jose Jimmy Penagos; Cristian Camilo Viáfara Arango
Presenter
Dias-Batista, L. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
Presentation details
Insights on the wear behavior of rolling element bearings containing mixed-material contact interfaces
10:10 - 10:30 Oral presentation
Authors
Ryan D. Evans
Presenter
EVANS, R. D. - The Timken Company
Presentation details
In-situ NbC-reinforced self-lubricating iron matrix composites via vacuumimpregnation
10:30 - 10:50 Oral presentation
Authors
Isadora Schramm Deschamps; Fernando Yoshiaki Miyata; Enzo Vanzuita Piazera; Daniel dos Santos Avila; Javiera Contreras; Nicolás Ignacio Araya Rivera; Aloisio Nelmo Klein
Presenter
DESCHAMPS, I. S. - Universidade Federal de Santa Catarina
Presentation details
Invited talk - Raehee Han raeheehan@gnu.ac.kr
09:40 - 10:10 Invited Speaker
Authors
Raehee Han
Presenter
Raehee Han - Gyeongsang National University
Presentation details
Triboelectro-Degradation Mechanisms in Metallic Contacts
10:10 - 10:30 Oral presentation
Authors
Mohsen Tajedini; Hong Liang
Presenter
Hong Liang - Texas A&M University
Presentation details
Influence of TiC Reinforcement Content on the Wear Mechanisms of SPS Processed Inconel 718 Composites
10:30 - 10:50 Oral presentation
Authors
pierre gorez; Foad Naimi; Eric FEULVARCH; Vincent FRIDRICI
Presenter
pierre gorez - Centrale Lyon
Presentation details
Development of hBN-Based Epoxy Nanocomposite Coating for Enhanced Wear and Corrosion Resistance
09:45 - 10:10 Invited Speaker
Authors
Jitendra Kumar Katiyar
Presenter
Jitendra Kumar Katiyar - Manipal Institute of Technology, Manipal
Presentation details
Investigate the effect of the hydrogen barrier coating on the hydrogen permeation rate into steel
10:10 - 10:30 Oral presentation
Authors
Ajay Pratap Singh Lodhi; Alaaeddin Al Sheikh Omar; Edward Vernon-Stroud; Mitjan Kalin; Ardian Morina
Presenter
LODHI, A. P. S. - University of Leeds
Presentation details
Lubricant Inerting - Performance of antiwear additives in inert atmospheres
10:30 - 10:50 Oral presentation
Authors
Vojin Lukic; Jie Zhang; Janet S. S. Wong; Hugh A. Spikes
Presenter
LUKIC, V. - Imperial College London
Presentation details
High-temperature fretting wear behavior of established Tribaloys and a newly developed high-entropy alloy of reduced Cobalt content
09:30 - 09:50 Oral presentation
Authors
Nora Kind; Johannes Walz
Presenter
WALZ, J. - German Aerospace Center
Presentation details
Glazing of C263 Nickel Superalloy at Extreme Temperatures
09:50 - 10:10 Oral presentation
Authors
Joseph P Harrison; Matthew B Marshall; Kate Tomlinson
Presenter
HARRISON, J.P. - University of Sheffield
Presentation details
Interfacial Tribofilm Evolution and Thermal–Tribological Enhancement of Nylon Rotating Bands via Graphene Oxide Coatings
10:10 - 10:30 Oral presentation
Authors
Shuang Yi
Presenter
Shuang Yi - Nanjing University of Science and Technology
Presentation details
Influence of Hydrogen on the Tribological Behavior of Cast Iron Block/Piston Ring Contacts: First Insights
10:30 - 10:50 Oral presentation
Authors
Miguel Angel Narvaez Ardila; Thiago de Oliveira Santos; Taina Luana da Silva; Regina Paula Garcia; Leonardo Rosa Ribeiro da Silva
Presenter
ARDILA, M. A. N. - Laboratorio de Tecnologia em Atrito e Desgaste
Presentation details
Invited talk - Profa. Maria Clelia Righi
09:45 - 10:10 Invited Speaker
Authors
Maria Clelia Righi
Presenter
RIGHI, M. C. - Università di Bologna
Presentation details
Neutron Imaging of Oil-Impregnated Sintered Gears for Self-Lubrication
10:10 - 10:30 Oral presentation
Authors
Thomas Lohner; Simon Sebold; Nicolai Sprogies; Karsten Stahl
Presenter
LOHNER, T. - Technical University of Munich, Gear Research Center
Presentation details
Nanostructured Tribolayers Enabling Heavy-Load Adaptive Superlubricity in Carbon-Based Solid Films
10:30 - 10:50 Oral presentation
Authors
Xinchun Chen; Wenli Deng; Jianbin Luo
Presenter
CHEN, X. - Tsinghua University
Presentation details
Inivted talk - Prof. Tevis Jacob
09:40 - 10:10 Invited Speaker
Authors
Tevis Jacobs
Presenter
JACOBS, T. - University of Pittsburgh
Presentation details
Memory erasure in rough viscoelastic contact
10:10 - 10:30 Oral presentation
Authors
Zichen Li; Renald Brenner; Lucas Frérot
Presenter
LI, Z. - Sorbonne University
Presentation details
Experimental Validation of the Heterogeneous Multiscale Methods for Modelling Laser Surface Textured Interfaces
10:30 - 10:50 Oral presentation
Authors
Joshua Montgomery; Robin Furze; Josh Armitage; Camille Hammersley; Mark C.T. Wilson; Michael Bryant; Gregory de Boer
Presenter
Montgomery, J. - University of Leeds
Presentation details
Controlling Friction Properties of 2D Materials through Substrate/Surface Modification
09:45 - 10:10 Invited Speaker
Authors
Philip Egberts
Presenter
Philip Egberts - University of Calgary
Presentation details
Shear-Driven Tribochemistry of MXenes at Sliding Interfaces
BHASKAR, V. - Indian Institute of Technology Delhi
Presentation details
Novel Materials for Solid Lubrication Based on High Entropy Alloy Disulfides
10:30 - 10:50 Oral presentation
Authors
Tomas Polcar; Yue Wang; Martin Cada; Zdenek Hubicka; Shubham Agarwal; Antonio Cammarata
Presenter
POLCAR, T. - Czech Technical University, University of Southampton
Presentation details
Design and Protection Strategies of Organic Coatings
09:45 - 10:10 Invited Speaker
Authors
Haitao Duan
Presenter
Duan, H - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
Presentation details
Comparative Tribological Study of W-S-(C) and DLC-Si-O Coatings for Mitigating Zinc Transfer in High-Stress Sliding Contacts
10:10 - 10:30 Oral presentation
Authors
Todor Vuchkov; Eduardo L. Silva; Albano Cavaleiro
Presenter
VUCHKOV, T. - Instituto Pedro Nunes
Presentation details
Development and characterisation of highly ordered and aligned nanocomposite coating through anodization for tribological applications
10:30 - 10:50 Oral presentation
Authors
Susanta Ugar; Musuvathi Santhaparipoornam Bobji
Presenter
S Ugar - Indian Institute of Science, Bengaluru
Presentation details
Friction Effects on Human Tactile Perception of Textures
09:45 - 10:10 Invited Speaker
Authors
Mary Cynthia Hipwell; Guangchao Wan; Caio Farias; Sarah Costrell; Gregory Reardon; Roberta Klatzky; J. Edward Colgate; Melisa Orta-Martinez
Presenter
HIPWELL, M. C. - Texas A&M University
Presentation details
Multilamellar Vesicle Architecture: Linking Bilayer Stacking and Interlamellar Spacing to Membrane Mechanics
10:30 - 10:50 Oral presentation
Authors
Maria Kaeek; Jacob Klein
Presenter
KAEEK, M. - Weizmann Institute of Science
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
Metrological Reliability of In-Situ Penetration Depth in Scratch Testing of Biomedical Polymers: Effects of Device Compliance and Indenter Geometry
Manuela Lopes Gennesseaux - Gustave Eiffel University
Presentation details
Analysis of skewness (Rsk) and kurtosis (Rku) parameters and diameter and cylindricity deviations in the dry drilling of Al-Mg-Si 6351-T6 alloy
10:50 - 11:30 Poster
Authors
Elhadji Cheikh Talibouya Ba; Marcus Vinícius de Oliveira; JOSENILTON DOS SANTOS LOPES; Mayara Fernanda Pereira; Éder Silva Costa; Paulo Sérgio Martins; Márcio Bacci da Silva
Presenter
BA, E. C. T. - Universidade Federal de Uberlândia
Presentation details
AI-Assisted Metrology of Adhesive Wear in UHMWPE and Its Correlation with Friction
10:50 - 11:30 Poster
Authors
Raphael dos Santos Machado Chaves; Vanessa Kapps; MARCIA MARIE MARU; Charles Bezerra Prado
Presenter
CHAVES, R. D. S. M. - National Institute of Metrology, Quality and Technology
Presentation details
3BoImPro: 3rd Body Image Processing, an image processing tool dedicated to third body analysis in tribology
Revankar, G A - Indian Institute of Science, Bengaluru
Presentation details
MXene/PVDF-Composites for Triboelectric Nanogenerators
10:50 - 11:30 Poster
Authors
Natarajan Gnanaseelan; Durga Prasad Pabba; David E. Acuña-Ureta; Gerhard Fischerauer; Stephan Tremmel; Max Marian
Presenter
Natarajan Gnanaseelan - Pontificia Universidad Católica de Chile
Presentation details
Super-Stretchable Ionic Conductor for Triboelectric Nanogenerator and Wearable Electronics
10:50 - 11:30 Poster
Authors
Weiguo Hu
Presenter
HU, W. - Beijing Institute of Nanoenergy and Nanosystems
Presentation details
Sustainable WPU/TOCNF supramolecular materials based on dual dynamic cross-linking for self-powered sensing
10:50 - 11:30 Poster
Authors
Xiuzhen Li; Dewen Yu; Yan Ke; Pan Zhang; Fei Chen; Zhijun Ren; Yingrong Tang
Presenter
LI, X. Z. - Xi’an Jiaotong University
Presentation details
New Generation of Battery Charging using Triboelectric Nanogenerators
10:50 - 11:30 Poster
Authors
Natalia Vargas Perdomo; Louis Cuccia; Xia Li
Presenter
PERDOMO, N. V. - Concordia University Montreal
Presentation details
Microstructural and tribological investigation of niobium carbide-reinforced copper-free brake friction material produced by powder metallurgy
11:30 - 11:50 Oral presentation
Authors
Augusto Adami Vidal; Maurício Vitor Kozerski Giaretton; Arthur Garcia Lima da Cruz; André de Oliveira Françozo; Isadora Schramm Deschamps; Tatiana Bendo; Aloisio Nelmo Klein
Presenter
VIDAL, A. A. - Universidade Federal de Santa Catarina
Presentation details
Practical Experiences with the Service Life of Greases at High Temperatures
11:50 - 12:10 Oral presentation
Authors
Ing. Jiri Valdauf; Ing. Martin Legner; Ing. Jozef Siska
Presenter
VALDAUF, J. - LUBRICANT s r.o.
Presentation details
Putting boundary friction effects into cold strip rolling mixed lubrication models
MONTMITONNET, P. - MINES Paris, PSL University, Centre for material forming (CEMEF)
Presentation details
Consideration of surface degradation in powder-lubricated interfaces
11:30 - 11:50 Oral presentation
Authors
Mihai ARGHIR; Ibrahim DIALLO; Mohamed ANDASMAS; Lassad AMAMI
Presenter
ARGHIR, M. - Institut Pprime
Presentation details
Quantitative evolution of tribo-layers in copper based friction materials for high-speed trains operating at 400 km/h equivalent energy density: Ratio of formation to damage
11:50 - 12:10 Oral presentation
Authors
Yuxuan Xu
Presenter
XU, Yuxuan - Central South University (Zhongnan University)
Presentation details
Deformation and damage mechanisms in architectured MAX phase reinforced Ti-based coatings fabricated by laser direct deposition under dynamic impact and elevated-temperature fretting
12:10 - 12:30 Oral presentation
Authors
Ke Hua; Fandi Kong; Haifeng Wang
Presenter
HUA, K. - Northwestern Polytechnical University
Presentation details
A novel fretting rig for friction hysteresis and contact area measurements under high mechanical impacts
11:30 - 11:50 Oral presentation
Authors
Jaffry Jaman; Alfredo Fantetti; Daniele Dini; Christoph Schwingshackl
Presenter
JAMAN, J. - Imperial College London
Presentation details
Towards Reproducible Tribology: High-Replication Experiments and StatisticalEvaluation of Measurement Uncertainty and System Variability
11:50 - 12:10 Oral presentation
Authors
Christian Orgeldinger; Stephan Tremmel
Presenter
ORGELDINGER, C. - University of Bayreuth
Presentation details
A Novel Bearing Health Indicator Construction Method Based on Attention-Guided Frequency-Band Decomposition and Adversarial Adaptation
12:10 - 12:30 Oral presentation
Authors
Guang Mei; ShiXi Yang; Jun He
Presenter
MEI, G. - Zhejiang University
Presentation details
Shear Velocity Dependent Stick-Slip Motion of Soft and Hard Solid Interfaces
PIEGARD, R. - Centre Technique des Industries Mécaniques
Presentation details
Experimental and theoretical study of a multi-recess compliant hydrostatic thrust bearing
15:00 - 15:20 Oral presentation
Authors
Alice MARINESCU; Aurelian FATU; Yann HENRY; Traian CICONE
Presenter
Marinescu A. - Institut national des Science Appliquées de Lyon
Presentation details
Sustainable Electrical Sliding Contact Materials:A Comprehensive Performance Index (CPI) Framework
15:20 - 15:40 Oral presentation
Authors
Anoop Gupta; B. Venkata Manoj Kumar
Presenter
GUPTA, A. - Indian Institute of Technology Roorkee
Presentation details
The effect of gallic acid derivatives additives in oil lubrication systems using SUJ2 steel
15:40 - 16:00 Oral presentation
Authors
Kazuki Ikoma; Koshi Adachi
Presenter
IKOMA, K. - Railway Technical Research Institute, Tohoku University
Presentation details
Effects of Hydrogen Aging on the Tribology of Molybdenum Disulfide (MoS2)
14:40 - 15:00 Oral presentation
Authors
Craig Barbour; Catherine Fidd; Kylie E. Van Meter; Santiago Lazarte; Christian Micko; Julian Long; Adam Delong; Tomas F. Babuska; John F. Curry; Nicolas Argibay; Brandon A. Krick
Presenter
KRICK, B.A. - Florida Agricultural & Mechanical University, Florida State University
Presentation details
Fretting Wear of High-Temperature Coatings in Flat-on-Flat Contacts for Gas Turbine Blade Tip Applications
15:20 - 15:40 Oral presentation
Authors
Mario Lavella; DANIELE BOTTO
Presenter
Lavella, M. - Università degli Studi di Bergamo
Presentation details
Friction and Wear Failure Mechanism Analysis of SR20 Aircraft Brake Pair
15:40 - 16:00 Oral presentation
Authors
Jiaqi Liu
Presenter
LIU, J. - Civil Aviation Flight University of China
Presentation details
Mechanism of Sulfur-Based Tribofilm Formation and Frictional Properties under Controlled Atmospheres
14:40 - 15:00 Oral presentation
Authors
SUN LIN
Presenter
LIN, S. - Kyoto University
Presentation details
Toward High Performance Greases by Incorporating Tribofilm-Forming Zirconia Nanocrystals
15:00 - 15:20 Oral presentation
Authors
Mateus da Silva Cardoso; Cinta Lorenzo-Martin; Nicholaos G. Demas; Aaron C. Greco; Robert J. Wiacek; Michael Blumenfeld; Robert W. Carpick
Presenter
DA SILVA CARDOSO, Mateus - University of Pennsylvania
Presentation details
Nanoparticles as hybrid additives to replace ZDDP
15:20 - 15:40 Oral presentation
Authors
Syed Junaid
Presenter
JUNAID, S. - Indian Institute of Technology Delhi
Presentation details
Mitigation of Electrochemical Wear in Steel Contacts Lubricated under Electric Current by Ionic Liquid additive
15:40 - 16:00 Oral presentation
Authors
Ronaldo Rodrigues Ramos da Silva; Salete Martins Alves
Presenter
, S. M. A. - Universidade Federal do Rio Grande do Norte
Presentation details
Magnetic Control of Friction Anisotropy via Surface Microstructures
14:40 - 15:00 Oral presentation
Authors
Marco Bruno; Luigi Portaluri; Michele Scaraggi
Presenter
BRUNO, M. - Istituto Italiano di Tecnologia, Università del Salento (ex-Lecce)
Presentation details
The Potential of Solid Lubricants as Friction and Wear Modifiers in Restorative Materials for Dentistry
15:00 - 15:20 Oral presentation
Authors
Magdalena Rodziewicz-Weremczuk; Vera Guduric; Agnieszka Magrys; Richard Frank Richter; Anne Bernhardt; Renata Chalas; Michael Gelinsky; Krzysztof Jan Kurzydlowski; Magdalena Lepicka
Presenter
RODZIEWICZ-WEREMCZUK, M. - Bialystok University of Technology
Presentation details
Limits of Friction-Based Assessment in Dental Cleaning Systems
15:20 - 15:40 Oral presentation
Authors
Pavel Cipek; Martin Vrbka
Presenter
CIPEK, P. - Brno University of Technology
Presentation details
Applying Tribology to Cosmetic Products: Exploring the Relationship Between Formulation and Friction
15:40 - 16:00 Oral presentation
Authors
Dr. Kieran Nar; Dr. Rory McAllister
Presenter
NAR, K. - PCS Instruments Ltd
Presentation details
Finite deformations in frictional sliding: how does the contact area change?
15:00 - 15:20 Oral presentation
Authors
Guido Violano; Luciano Afferrante; Michele Scaraggi; Nicola Menga
Presenter
MENGA, N. - Politecnico di Bari
Presentation details
A promising approach to investigate third body flows: HPT and X-ray tomography
Study on Changes in Erythrocyte Properties and Their Effects on Blood Rheology
16:00 - 16:40 Poster
Authors
Xiangjun Zhang; Shunyuan Xu; Qian Lu; Ping Zhang
Presenter
ZHANG, X. J. - Tsinghua University
Presentation details
Novel biomimetic synthetic injectable macromolecular materials for efficient lubrication treatment of osteoarthritis
16:00 - 16:40 Poster
Authors
Xiaoduo Zhao
Presenter
ZHAO, X. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Evaluation of Bladeless Fan with Wavy Ledge Design for Noise Reduction and Efficiency
16:00 - 16:40 Poster
Authors
Mohd Danial Ibrahim; Ir. Sitti Aishah Najamudin; Herbert Ian B Juhan; Muhammad Alzam Amrun @ Ajis; Abang Mohammad Nizam Abang Kamaruddin; Ahmad Beng Hong Kueh; Norlida Jamil; Ahmad Adzhar bin Mohd Khairulzaim; M Azlan B Masod
Presenter
IBRAHIM, M. D. - Universiti Malaysia Sarawak
Presentation details
Influence of graphene oxide content on the coefficient of friction of a dental resin composite under reciprocating sliding
16:00 - 16:40 Poster
Authors
Henrique Miguel Cunha; Victor Hugo Werner Baggio; Ágatha Borges Teixeira Cunha; Giuseppe Pintaude; CARLOS HENRIQUE DA SILVA
Presenter
CUNHA, H. M. - Universidade Tecnológica Federal do Paraná
Presentation details
A review on tribological aspects of PEEK coatings for orthopaedic implants
16:00 - 16:40 Poster
Authors
Miguel Grissai Santos; Giuseppe Pintaude; Marjorie Benegra
Presenter
SANTOS, M. G. - Universidade Tecnológica Federal do Paraná
Presentation details
Rheological and Soft Tribological Characterization of an Oat-Based Functional Food Enriched with Curcumin-Loaded Solid Lipid Nanoparticles
16:00 - 16:40 Poster
Authors
Guilherme Alves Favalessa; Jorge Miguel Magalhães Vieira; José Manuel Ramos Gomes; Cristiano Simões de Abreu; Cherlio Scandian
Presenter
FAVALESSA, G. A. - Universidade Federal do Espírito Santo
Presentation details
Side-group-mediated friction of amphiphilic copolymer-doped hydrogels
16:00 - 16:40 Poster
Authors
Panpan Zhao; Xinyuan Ye; Jacob Klein
Presenter
ZHAO, P. - Weizmann Institute of Science
Presentation details
Wear behavior of low elastic modulus Ti–Nb–Si alloys under simulated physiological conditions
CARVALHO, D. M. L. - Universidade Federal de Santa Catarina
Presentation details
The Effect of Simulated Gait on the Micromotion and Corrosion of Modular Tapers
16:00 - 16:40 Poster
Authors
Andrew Robert Beadling; Abigail Wade; Charles Joe Cullum; Simon Collins; Danielle De Villiers; Michael Bryant
Presenter
BEADLING, A. R. - University of Birmingham
Presentation details
Surface and Tribological Characteristics of TiN, CrN and ZrN Coatings on AISI 316L Stainless Steel for Medical Applications
16:00 - 16:40 Poster
Authors
Monika Madej; Magdalena Niemczewska-Wójcik; Marcin Madej
Presenter
MADEJ, M. - Kielce University of Technology
Presentation details
Tribocorrosion-Resistant Nanosilica Coatings on Ti-6Al-4V Alloy for Biomedical Implants
16:00 - 16:40 Poster
Authors
Babra Abbas
Presenter
ABBAS, B. - Indian Institute of Technology Delhi
Presentation details
Study on tribological properties of self-lubricating materials based on bionic micro-texture
16:00 - 16:40 Poster
Authors
Xiaoya Zhang; Fei Chen; Ke Yan; Bo Wen; Jindao Guo; Xiuzhen Li
Presenter
ZHANG, X. Y. - Xi'An jiaotong University
Presentation details
Tribo-electrochemical Behaviour of Surface Treated SLM Ti6Al4V-ELI under Ringer’s Solution
16:00 - 16:40 Poster
Authors
Eurico Felix Pieretti; Mauricio David Martins das Neves; Marina Fuser Pillis; Renato Altobelli Antunes; Mara Cristina Lopes Oliveira; Antonio Carlos Fasano; Davide Piaggio
Presenter
PIERETTI, E. F. - Intituto de Pesquisas Energéticas e Nucleares
Presentation details
Epithelial Mechanics | Actin Reorganization Under Shear
16:00 - 16:40 Poster
Authors
W. Gregory Sawyer
Presenter
SAWYER, W. G. - Moffitt Cancer Center
Presentation details
Understanding the activation volume in mechanochemistry at frictional interface
16:00 - 16:40 Poster
Authors
Yang Wang
Presenter
Yang Wang - Southwest Jiaotong University
Presentation details
Simulation-Driven Insight into Wear Performance of Laser Powder Bed Fused 316L Stainless Steel
16:00 - 16:40 Poster
Authors
German Omar Barrionuevo; Héctor Calvopiña
Presenter
BARRIONUEVO, G. O. - Universidad San Francisco de Quito
Presentation details
Insight into Startup Lubrication of Tilting Pad Journal Bearings Using CFD
16:00 - 16:40 Poster
Authors
Samuel Cupillard
Presenter
Samuel Cupillard - Hydro-Québec
Presentation details
EHL simulation considering the elastic deformation of rough surfaces caused by hydrodynamic pressure
16:00 - 16:40 Poster
Authors
Christopher Platis; Klara Feile; Markus Polzer; Benedict Rothammer; Sandro Wartzack
Presenter
Christopher Platis - Friedrich-Alexander-Universität Erlangen-Nürnberg
Presentation details
Axial sealing in scroll expanders is studied using a pin-on-disc test bench. Measured leakage rates are compared to models coupling contact mechanics and gas flow. Results show good agreement and help identify the most suitable flow model.
16:00 - 16:40 Poster
Authors
TOURNIS Stéphane_; Noel Brunetiere; Vincent LEMORT; Hamid ZAIDI
Presenter
TOURNIS Stéphane_ - Université de Poitiers
Presentation details
Air-lubricant thin film rotating flows: An image-based, homogenised interface modelling framework
Properties of flowable composite materials used for dental fillings
16:00 - 16:40 Poster
Authors
Katarzyna Piotrowska; Monika Madej; Joanna Wysokińska-Miszczuk; Michał Paulo; Szymon Drabik
Presenter
DRABIK, S. - Kielce University of Technology
Presentation details
Effect of Tempering Treatment on Microstructure and Mechanical Properties of D2 Tool Steel for Wear‑Intensive Applications
16:40 - 17:00 Oral presentation
Authors
Venu Yarasu; Bojan Podgornik; Barbara Šetina Batič; Marko Sedlaček; Peter Jurci
Presenter
YARASU, V. - Institute of Metals and Technology
Presentation details
A Surrogate-Based Sensitivity Analysis of Tyre-Pavement Tractive Contact
17:00 - 17:20 Oral presentation
Authors
Débora Cardoso da Silva; Ndrianary Rakotovao Ravahatra; Benoit Picoux; Philippe Reynaud; Sylvie Yotte; Christophe Petit
Presenter
CARDOSO DA SILVA, D. - Université de Limoges
Presentation details
Dry-Sliding Wear Resistance of AISI 410L Martensitic Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated Conditions
17:20 - 17:40 Oral presentation
Authors
Jurandir Marcos Sá de Sousa; Milton Pereira; Paulo Cordeiro Machado; Richard de Medeiros Castro
Presenter
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
Presentation details
Friction Modification on Wet Rails: Adhesion, Wear and RCF
17:40 - 18:00 Oral presentation
Authors
Simon Skurka; Radovan Galas; Jiaxin Li; Honghao Wang; Milan Omasta; Haohao Ding; Wenjian Wang; Ivan Křupka; Martin Hartl
Presenter
SKURKA, S. - Brno University of Technology
Presentation details
Evaluation of Zinc Adhesion on Cast Iron Tool Materials
18:00 - 18:20 Oral presentation
Authors
Pedro Paulo Búrigo Bastos; Francisco Cavilha Neto; Derek Manoel Luup Carvalho; João Pedro Vaz Silveira; Alicia Correa Lucena; Diego Berti Salvaro; Cristiano Binder
Presenter
BASTOS, P. P. B. - Universidade Federal de Santa Catarina
Presentation details
Electro-Tribology and Electro-Rheology of Greases – Influence of Doping
16:40 - 17:00 Oral presentation
Authors
Paul Staudinger; Kartik Pondicherry
Presenter
PONDICHERRY, K. - Anton Paar GmbH
Presentation details
Novel Polymeric Friction Modifier to Optimize Lubricity and Inorganic Additives Synergy
17:00 - 17:20 Oral presentation
Authors
Micky Lee Fu Xiang; Pieter Struelens
Presenter
Pieter Struelens - Oleon NV
Presentation details
The effect of electric potentials on the initiation and progression of surface initiated rolling contact fatigue
17:20 - 17:40 Oral presentation
Authors
Benjamin Wainwright; Thomas Welham; Clive Hamer; Yu Liu
Presenter
WAINWRIGHT, B. - PCS Instruments Ltd
Presentation details
Environmental and tribological assessment of cutting fluids produced from aminolyzed castor oil
17:40 - 18:00 Oral presentation
Authors
Ney Francisco Ferreira; Paola Stradolini da Silva; Marcelo Gryczak; Alice do Amaral Rodrigues; Régis Henrique da Silva Souza; Germano Lasch; Liu Yesukai de Barros; Patric Daniel Neis; Cesar Liberato Petzhold
Presenter
FERREIRA, N. F. - Universidade Federal do Rio Grande do Sul
Presentation details
Effect of Clearances on Bush Rotation Speed and Oil Film: X-ray CT Visualization in Floating Bush Bearings
18:00 - 18:20 Oral presentation
Authors
NATTAWAT NILAMANN; MASAYUKI OCHIAI
Presenter
Nattawat Nilamann - Tokai University
Presentation details
The impact of water and hydraulic oil contamination in cold rolling oil on the surface quality of stainless steels.
16:40 - 17:00 Oral presentation
Authors
Géssica Seara Faria; Lucio Roberto Menezes; Wilian da Silva Labiapari; Luiz Paulo Mendonca Brandão; José Daniel Biasoli Mello
Presenter
FARIA, G. S. - Aperam South America
Presentation details
Beyond the Friction Coefficient: Creep Curves for Wheel–Rail Friction Assessment
17:00 - 17:20 Oral presentation
Authors
Radovan Galas; Martin Valena; Tomas Jordan; Daniel Kvarda; Simon Skurka; Milan Omasta; Ivan Krupka; Martin Hartl
Presenter
GALAS, Radovan - Brno University of Technology
Presentation details
Elastic Compression in Three-Body Line Contact: Reference-Point Selection
17:20 - 17:40 Oral presentation
Authors
Shuangbiao Liu; Wei Pu
Presenter
LIU, S. - Sichuan University
Presentation details
The dominant role of carbide network architecture over chromium content in the scratch response of high-chromium cast irons grinding media
17:40 - 18:00 Oral presentation
Authors
Eleir Mundim Bortoleto; Victor Cardoso Campideli
Presenter
BORTOLETO, E. M. - Instituto Tecnológico Vale
Presentation details
Tribochemical Processing of Carbonates: Advancing Low Carbon and Sustainable Industrial Technologies
18:00 - 18:20 Oral presentation
Authors
Roman Nevshupa; ESMERALDA MUÑOZ CORTES; Marta Castellote; RIDWAN OLAMIDE AGBAOYE; José Ramón Ares
Presenter
NEVSHUPA, R. - CSIC
Presentation details
Acoustic Emission Associated with Stick–Slip in Human Skin–Surface Contact
16:40 - 17:00 Oral presentation
Authors
Andrei CALIN; Andrei TUDOR
Presenter
CALIN, A. - NAtional University of Science and Technology POLITEHNICA Bucharest
Presentation details
Laser-induced nanospikes on the tribological and antibacterial properties of titanium and bioceramics
17:00 - 17:20 Oral presentation
Authors
Pranciškus Bakutis; Tadas Matijošius; Mindaugas Gedvilas; Andrius Žemaitis; Lina Ragelienė; Dominika Adamovic; Alfredas Smailys; Serhii Lavrys; Juozas Padgurskas
Presenter
BAKUTIS, P. - Kaunas Clinics, Vytautas Magnus University
Presentation details
Tribological behavior of micro-arc oxidation coatings containing Ag nanoparticles produced on titanium substrate
17:20 - 17:40 Oral presentation
Authors
Łukasz Maj; Daniel Toboła; Faiz Muhaffel; Anna Trelka-Druzic; Grzegorz Cempura; Łukasz Boroń; Mariusz Kulczyk; Cezary Drenda
Presenter
MAJ, Ł. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences
Presentation details
Pressure-Driven Microstructural Evolution and Tribological Response of CoCrMo Orthopaedic Bearings
17:40 - 18:00 Oral presentation
Authors
Edona Hyla; Andrew Robert Beadling; Michael Bryant; Richard M Hall; Gregory de Boer
Presenter
HYLA, E. - University of Birmingham
Presentation details
Exotic Tribology of Soft Interfaces – Chocolates to Contact Lenses
18:00 - 18:20 Oral presentation
Authors
Kartik Pondicherry; Paul Staudinger
Presenter
PONDICHERRY, K. - Anton Paar GmbH
Presentation details
Effects of ultrasonic surface rolling processing on the surface properties of 4Cr13 stainless steel
Luo, X. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
Presentation details
Tribological performance of single-step fs-laser-induced dual-scale surface structures on Ti6Al4V
17:20 - 17:40 Oral presentation
Authors
Iñigo Fernandez de Arroyabe; Andrea Aginagalde; Ainhoa Guinea; Jörn Bonse; Dirk Spaltmann; Alaitz Zabala
Presenter
ZABALA, A. - Universidad de Mondragon Mondragon Unibertsitatea
Presentation details
Laser Surface Hardening of Grey Cast Iron Disc: Role of Scanning Speed and Laser Power in Wear Reduction
Dopant-Controlled Stabilization of ta-C under Current-Carrying Sliding
16:40 - 17:00 Oral presentation
Authors
Amirmasoud Khodadadibehtash; Ji-Woong Jang; Jongkuk Kim; Ahmet T. Alpas
Presenter
Amir M. K. Behtash - University of Windsor
Presentation details
Electrical Surface Damage Characteristics of Rolling Contacts Under Different Lubrication Regimes
17:00 - 17:20 Oral presentation
Authors
Daniel Powers; Ling Wang; Suleiman Sharkh
Presenter
POWERS, D. - University of Southampton
Presentation details
Layer Thickness-Dependent Deformation and Damage Transitions in DLC/WC Multinanolayer Coatings
17:20 - 17:40 Oral presentation
Authors
Ramin Aghababaei; Li Ma; Narguess Nemati
Presenter
AGHABABAEI, R. - Aarhus University / Aarhus Universitet
Presentation details
Highly conductive and wear resistant ceramic-liquid metal composite
17:40 - 18:00 Oral presentation
Authors
Jianxun Zhao; Aisheng Song; Xin Li; Tianbao Ma
Presenter
ZHAO, Jianxun - Tsinghua University
Presentation details
Construction of heavy-load superlubricity based on the nanoclustering and ordering orientation of the tribo-products
18:00 - 18:20 Oral presentation
Authors
Wenli Deng; Xinchun Chen; Han Tian; Jianbin Luo
Presenter
DENG, W. - Tsinghua University
Presentation details
Exceptional high-temperature wear resistance in CoCrFeMnNi high-entropy alloy composite via Al/Ti doping and hBN/TiC dual ceramic reinforcement
18:20 - 18:40 Oral presentation
Authors
Wenbo Ma; Oleksandr Tisov
Presenter
MA, W. - Xi'An jiaotong University
Presentation details
Experimental determination of evolution of the coefficient of friction andimplementation in a simulation routine
16:40 - 17:00 Oral presentation
Authors
Denny Knabner; Prof. Dr. sc. ETH Alexander Hasse
Presenter
Denny Knabner - Technische Universität Chemnitz
Presentation details
Rotating tribometer at high temperature for understanding copper extrusion tool wear
17:00 - 17:20 Oral presentation
Authors
pierre gorez; Gaëtan BOUVARD; Foad Naimi; Eric FEULVARCH; Vincent FRIDRICI
Presenter
GOREZ, P. - Centrale Lyon
Presentation details
Friction monitoring during vibration using solitary waves
17:20 - 17:40 Oral presentation
Authors
Alfredo Fantetti; Jean Myung Jung; Kathryn H. Matlack; Alexander F. Vakakis
Presenter
FANTETTI, A. - Imperial College London
Presentation details
Galling behaviour of AZ80 magnesium alloy and H13 steel by using an adapted four-ball tester
17:40 - 18:00 Oral presentation
Authors
Luis Ernesto Mozqueda-Flores; Jose Victoria-Hernandez; Ezequiel A. Gallardo-Hernández; Manuel Vite-Torres; Cesar Sedano de la Rosa
Presenter
E. A. GALLARDO-HERNÁNDEZ - Instituto Politecnico Nacional
Presentation details
Frictional Instabilities in Elastomer Contacts
18:00 - 18:20 Oral presentation
Authors
Thomas Reddyhoff; Nicola Menga; Noa Soic; Giulio Fatti; Kian Kun Yap
Presenter
REDDYHOFF, T. - Imperial College London
Presentation details
Micro Water Ingress in Bearings: Morphological evolution of the medium
18:20 - 18:40 Oral presentation
Authors
Jindao Guo; Yan Bei; Yan Ke; Luo Yiyao; Fei Chen; Zhang Xiaoya; Hong Jun
Presenter
GUO, J.D - Xi'An Jiaotong University
Presentation details
High-speed thermoelastohydrodynamic friction with entrained air
16:40 - 17:00 Oral presentation
Authors
Alexander MacLaren; Thomas Welham; Matt Smeeth
Presenter
MACLAREN, A. - PCS Instruments Ltd
Presentation details
Role of hBN nanoparticles in PEG on boundary friction and lubrication in non-conformal contacts
17:00 - 17:20 Oral presentation
Authors
Petr Šperka; Lukáš Daněk; David Pavliňák; Tomáš Poláček; Ivan Saldan; Ivan Křupka; Jan M. Macak; Martin Hartl
Presenter
ŠPERKA, P. - Brno University of Technology
Presentation details
Friction Performance of Bio-Oils Obtained by Different Cell Disruption Methods
17:20 - 17:40 Oral presentation
Authors
Lucia Vieira; Thainá Barbosa de Lima Cordeiro; Ana Barbara Goulart; Virginia Klausner de Oliveira; Jose Geraldo da Cruz Pradella; Polyana Alves Radi; Adélio Manuel Sousa Cavadas
Presenter
VIEIRA, L. - Instituto Tecnológico de Aeronáutica, Universidade do Vale do Paraíba
Presentation details
A Multi-Technique Experimental Framework for Assessing LubricantDriven White Etching Crack Formation in Rolling Bearing
17:40 - 18:00 Oral presentation
Authors
Hakim El Bahi; Christelle Vacher; Benjamin Lehmann; Peter Roessler; Quentin ARNOUX; Goulven Bouvier; Sophie Loehlé; Driss Ben Mouhamed
Presenter
BAHI, H. E. - TotalEnergies
Presentation details
Elastohydrodynamic Film Thickness and Traction at High Speeds
18:00 - 18:20 Oral presentation
Authors
Nubtong Vanisri; Amir Kadiric; Guillermo E. Morales-Espejel
Presenter
VANISRI, N. - Imperial College London
Presentation details
Tunable tribology properties of shape memory polymer
18:20 - 18:40 Oral presentation
Authors
Zenghui Yang; Hui Liu; Qihua Wang
Presenter
YANG, Z. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Design of Experiments Optimization NbC and Graphite in Sintered Ferrous Brake Pads
16:40 - 17:00 Oral presentation
Authors
André de Oliveira Françozo; Isadora Schramm Deschamps; Tatiana Bendo; Maurício Vitor Kozerski Giaretton; Arthur Garcia Lima da Cruz; Augusto Adami Vidal; Aloisio Nelmo Klein
Presenter
FRANÇOZO, A. D. O. - Universidade Federal de Santa Catarina
Presentation details
Shear Orientation Observation of Grease Thickener Using Rheo-SALS and Its Modeling
17:00 - 17:20 Oral presentation
Authors
Hanul CHUN; TOMOKO HIRAYAMA; Wataru YAGI
Presenter
CHUN, H. - Kyoto University
Presentation details
How roughness-scale physics influence homogenization coefficient behavior in mixed lubrication
17:20 - 17:40 Oral presentation
Authors
João Carlos Fernandes de Queiróz; Leonardo Medeiros Xavier; Francisco José Profito; Suhaib Ardah
Presenter
QUEIRÓZ, J. C. F. - Universidade de São Paulo
Presentation details
Geometry- and Physics-Aware Modelling of Lubricated Interfaces
17:40 - 18:00 Oral presentation
Authors
Suhaib Ardah; Francisco José Profito; Daniele Dini
Presenter
ARDAH, S. - Imperial College London
Presentation details
Triboelectricity-driven green catalysis via contact electrification
16:50 - 17:20 Invited Speaker
Authors
Di Wei
Presenter
Di Wei - Beijing Institue of Nanoenergy and Nanosystems
Presentation details
Charge pumping strategy for high-performance mechanical energy harvesting: beyond triboelectric charges
17:20 - 17:40 Oral presentation
Authors
Liang Xu
Presenter
XU, L. - Chinese Academy of Sciences
Presentation details
Mutual Effects of Interfacial Charge Transfer and Light in Solid-Liquid Contact
17:40 - 18:00 Oral presentation
Authors
Shicai Zhu; Liran Ma; Yu Tian; Jianbin Luo
Presenter
ZHU, S. - Tsinghua University
Presentation details
Time-dependent Behavior and Wear Resistance of DLC-coated Triboelectric Nanogenerators
18:00 - 18:20 Oral presentation
Authors
Annika Hilgert; Philipp Mattauch; Christian Orgeldinger; Gerhard Fischerauer; Stephan Tremmel
Presenter
HILGERT, A. - University of Bayreuth
Presentation details
Tribovoltaic effect and self-powered intelligent bearing
18:20 - 18:40 Oral presentation
Authors
Chi Zhang
Presenter
ZHANG, C. - Beijing Institute of Nanoenergy and Nanosystems
Presentation details
Lessons from Nature: Bioinspired Mechanically Durable and Self-healing Superliquiphilic/phobic Surfaces for Green Tribology
08:30 - 09:30 Plenary Speaker
Authors
Bharat Bhushan
Presenter
Bharat Bhushan - Ohio State University
Presentation details
Quantification of Zn adhesion on cast iron for stamping tools
09:30 - 09:50 Oral presentation
Authors
Derek Manoel Luup Carvalho; Pedro Paulo Búrigo Bastos; Francisco Cavilha Neto; João Pedro Vaz Silveira; Diego Berti Salvaro; Cristiano Binder
Presenter
CARVALHO, D. M. L. - Universidade Federal de Santa Catarina
Presentation details
Effect of Multiple Metallic Powder Reuse Cycles on the Tribological Performance of Additively Manufactured 316L Stainless Steel by L-DED
09:50 - 10:10 Oral presentation
Authors
Jhonattan Gutjahr; Milton Pereira; Henrique Santos Ferreira; Anselmo Thiesen Junior; Jurandir Marcos Sá de Sousa
Presenter
SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
Presentation details
From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
Invited Talk - Prof. Jason Stokes from The University of Queensland
09:45 - 10:10 Invited Speaker
Authors
Jason Stokes
Presenter
Stokes, J. - University of Queensland
Presentation details
Improvements to oral tribology test methodologies for xerostomia aid optimisation
10:10 - 10:30 Oral presentation
Authors
Eleanor Barrett
Presenter
BARRETT, E. - Imperial College London
Presentation details
Engineering Fluid–Porous Interface Affinity for Reversible Infiltration and Release in Biomimetic Tribological Contacts
10:30 - 10:50 Oral presentation
Authors
Maria Giulia Sardiello
Presenter
SARDIELLO, M. G. - Freudenberg Technology Innovation SE & Co. KG, Istituto Italiano di Tecnologia, University of Salento
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
Synergistic wear mechanisms in grinding media: how does the wear of grinding balls occur?
11:30 - 11:50 Oral presentation
Authors
Victor Cardoso Campideli; Eleir Mundim Bortoleto; Jose Jimmy Penagos
Presenter
CAMPIDELI, V. C. - Instituto Tecnológico Vale
Presentation details
Optimisation of EV drivetrain fluids using a system-level efficiency model
11:50 - 12:10 Oral presentation
Authors
Joseph Shore; Amir Kadiric
Presenter
SHORE, J. - Imperial College
Presentation details
Study on the Tribological Properties of TiC-316L Composites Prepared by MEAM
12:10 - 12:30 Oral presentation
Authors
Shujun Zhou; Shikang Huang; Yilun Yang; Zeyu Wan
Presenter
ZHOU, S. - China University of Mining & Technology Beijing
Presentation details
Electrically Tunable Behavior of Nb-Doped MoS2 Coatings
11:30 - 11:50 Oral presentation
Authors
Miguel Rubira Danelon; Newton Kiyoshi Fukumasu; Roberto Martins de Souza; Ahmet T. Alpas; ANDRÉ PAULO TSCHIPTSCHIN
Presenter
DANELON, M. R. - Universidade de São Paulo
Presentation details
Effect of Ti2SnC on properties of iron-based hybrid self-lubricating composites
11:50 - 12:10 Oral presentation
Authors
Javier Sánchez Jerez; Christopher Salvo; Cristiano Binder; Diego Berti Salvaro; Guilherme Oliveira Neves
Presenter
NEVES, G. O. - Universidad del Biobio
Presentation details
Influence of diffused hydrogen on cavitation-erosion resistance and damage mechanisms of 316L stainless steel
12:10 - 12:30 Oral presentation
Authors
Stefanie Hanke; Morteza Abedini
Presenter
Stefanie Hanke - Universität Duisburg Essen
Presentation details
Tribological Behavior of Plasma-Nitrided Steels Evaluated by Gear Contact Fatigue Test
11:30 - 11:50 Oral presentation
Authors
Tainan Daniel Andrioni; Francisco Cavilha Neto; Milena Pan Tavares; João Pedro Vaz Silveira; Gisele Hammes; Cristiano Binder; Diego Berti Salvaro
Presenter
ANDRIONI, T. D. - Universidade Federal de Santa Catarina
Presentation details
Tribological Behaviour of DLC-Coated Surfaces Under Electrified Lubricated Sliding Contacts
11:50 - 12:10 Oral presentation
Authors
Diandra Grossmann Pereira; Tainan Daniel Andrioni; Júlia Afonso Pires; Diego Berti Salvaro; Cristiano Binder
Presenter
PEREIRA, D. G. - Universidade Federal de Santa Catarina
Presentation details
Effect of plasma nitriding on electrified tribological contacts: the case of oil-lubricated AISI 4140 steel
12:10 - 12:30 Oral presentation
Authors
Júlia Afonso Pires; Diandra Grossmann Pereira; Tainan Daniel Andrioni; Diego Berti Salvaro; Cristiano Binder
Presenter
PIRES, J. A. - Universidade Federal de Santa Catarina
Presentation details
Experimental Evaluation of Structural Characteristics of a Hybrid Thrust Foil Bearing Using Metal and Viscoelastic Material
11:30 - 11:50 Oral presentation
Authors
MASAYUKI OCHIAI
Presenter
Masayuki Ochiai - Tokai University
Presentation details
Wear in Electrified Rolling-Sliding Contacts
11:50 - 12:10 Oral presentation
Authors
Ammad Yousuf; Hugh A. Spikes; Amir Kadiric
Presenter
YOUSUF, A. - Imperial College London
Presentation details
Tribological behavior of low viscosity synthetic ester base oils for Electric Vehicles under pure sliding electrified conditions
12:10 - 12:30 Oral presentation
Authors
CLAUDIA MARTÍNEZ DE CASTILLA; BIHOTZ PINEDO; EDUARDO TABARES; VANESA ALONSO; MARTA HERNAIZ; BORJA ARMENDARIZ; AINARA LOPEZ; JAVIER BARRIGA
Presenter
BARRIGA, J. - Fundación Tekniker
Presentation details
Comparative evaluation of the abrasive wear response on brake pads of SUV and pickup trucks using a modified ASTM G65 method
11:30 - 11:50 Oral presentation
Authors
German Omar Barrionuevo; Lorena Bejarano; Alfredo Valarezo; Daniel Cajo; Angie Torres; Erika Cueva
Presenter
BARRIONUEVO, G. O. - Universidad San Francisco de Quito
Presentation details
Niobium carbide as allrounder for machining and wear protection
11:50 - 12:10 Oral presentation
Authors
Mathias woydt; Eduardo Cannizza; Rodney Genga
Presenter
Eduardo Cannizza - EHT Consultoria em Engenharia Ltda
Presentation details
Wear analysis of the friction stir welding (FSW) tool for the AA6063 aluminum welding process
12:10 - 12:30 Oral presentation
Authors
Isnardo González Jaimes; Kevin Buriticá; Robin Cristancho
Presenter
JAIMES, I. G. - Universidad Industrial de Santander
Presentation details
Grease-lubricated hybrid rolling element bearings: friction torque and carbon footprint
11:30 - 11:50 Oral presentation
Authors
Gabriel Calderon-Salmeron
Presenter
CALDERON-SALMERON, G. - Royal Institute of Technology / Kungliga Tekniska Högskolan
Presentation details
Tribological Performance of Sustainable Biocomposite Brake Pads
11:50 - 12:10 Oral presentation
Authors
Julia Hummel Della Barba; Lucas Kiyoji Matsubara; Beatriz de Andrade Ornellas; JANAINA FRACARO DE SOUZA GONÇALVES; Bruna Zappelino Camillo; Jeferson Trevisan Pacheco; Anael Preman Krelling
Presenter
BARBA, J. H. D. - Universidade Tecnológica Federal do Paraná
Presentation details
Commissioning of a Rheometer-Based Ball-on-Three-Plates Configuration for Pre-Clinical Friction Testing of Cartilage
11:30 - 11:50 Oral presentation
Authors
Luca Tortoreto; Dominik Jonas Federl; Markus Wimmer; Mohammed Abualia
Presenter
TORTORETO, L. - Rush University Medical Center
Presentation details
MORPHING SURFACE TOPOGRAPHY AS PLATFORM FOR CULTURE CELLULAR BIOCONTACTS
11:50 - 12:10 Oral presentation
Authors
Giulia Marie Claire Sanzia; Luciana Algieri; Virgilio Brunetti; Massimo De Vittorio; Michele Scaraggi
Presenter
SANZIA, G. M. C. - Istituto Italiano di Tecnologia, University of Salento
Presentation details
Advanced Preclinical Simulation – Physiological Adverse Activities on Metal-on-Polymer THRs and Ceramic-on-Ceramic Hip Resurfacing
12:10 - 12:30 Oral presentation
Authors
Samuel Perry; Ben Clegg; Charles Joe Cullum; Danielle De Villiers; Michael Bryant; Andrew Robert Beadling
Presenter
BEADLING, A. R. - University of Birmingham
Presentation details
Multiscale Entropy Coupling in Tribological Running-In: Surface Topography as a Mesoscale Entropy Reservoir
11:30 - 11:50 Oral presentation
Authors
Boris Brodmann; Matthias Eifler
Presenter
BRODMANN, B. - OptoSurf GmbH
Presentation details
A Multi-Scale Modelling of Metal-to-Metal Seals
11:50 - 12:10 Oral presentation
Authors
Vladislav YASTREBOV; Komi Martin AFANGBEDJI
Presenter
YASTREBOV, V. - CNRS, Mines Paris - PSL
Presentation details
Experimental characterization of particle-shape and surface-dependent tribological properties in railway ballast via 3D scanning and DEM calibration
12:10 - 12:30 Oral presentation
Authors
Eleir Mundim Bortoleto; Erivaldo Santos Jales
Presenter
BORTOLETO, E. M. - Instituto Tecnológico Vale
Presentation details
Triboelectric nanogenerators (TENG) constructed from dense ZIF-zni crystals integrated in PU composite films
11:30 - 11:50 Oral presentation
Authors
Chuzhan Jin
Presenter
JIN, C. - University of Oxford
Presentation details
Decoupling the effects of normal and shear stresses on the triboelectrification of PTFE via in-situ tribometry
11:50 - 12:10 Oral presentation
Authors
Jamal Umer; Andrew Robert Beadling; Josh Armitage; Michael Bryant
Presenter
UMER, J. - University of Birmingham
Presentation details
Taking Charge off Droplets: Advancing the Droplet TENG
12:10 - 12:30 Oral presentation
Authors
Oliver Prendergast; Giulio Fatti; Andrew Holmes; Thomas Reddyhoff
Presenter
PRENDERGAST, O. - Imperial College London
Presentation details
Influence of Environmental Molecules on the Nano-interface Structure of Hydrogenated Carbon Nitride Coatings under Dry Conditions
11:30 - 11:50 Oral presentation
Authors
Kazuya Kuriyagawa; Shogo Yanagida; Koshi Adachi
Presenter
KURIYAGAWA, K. - Tohoku University
Presentation details
Molecular Dynamics Study of the Mechanical and Tribological Characteristics of Metal-Doped DLC Nanocomposite Coatings
11:50 - 12:10 Oral presentation
Authors
Sang-Hoon Lee; Koo-Hyun Chung; Hyun-Joon Kim
Presenter
LEE, S. H. - Kyungpook (Kyungbook) National University
Presentation details
Influence of Laser-Textured Shafts on Friction and Temperature Distribution in Journal Bearing Systems
12:10 - 12:30 Oral presentation
Authors
Benjamin Klinghart; Georg Jacobs
Presenter
KLINGHART, B. - MSE - RWTH Aachen University
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:40
Sponsor Lecture
Presentation details
Numerical analysis of thermal fatigue behavior of AISI H13 tool steel produced by Power Bed Laser Fusion (PBF-LB/M)
14:00 - 14:20 Oral presentation
Authors
Vinicius Alves de Lima; Roberto Martins de Souza
Presenter
LIMA, V. A. D. - Universidade de São Paulo
Presentation details
Fabrication of Electronics and Sensors using a Surface Energy-Directed Assembly Process
14:20 - 14:40 Oral presentation
Authors
Zhimin Chai
Presenter
CHAI, Z. - Tsinghua University
Presentation details
Stretchable Serpentine Electrodes with High Fidelity Fabricated Using Orientation-Controlled Surface Energy-Directed Assembly
14:40 - 15:00 Oral presentation
Authors
Siqing Yuan; Zhimin Chai
Presenter
YUAN, S. - Tsinghua University
Presentation details
Evolution of Corrosion-Induced Friction and Wear Mechanisms in Cylinder Liner Material under Methanol Engine Conditions
15:00 - 15:20 Oral presentation
Authors
Hang Li; Chang Ge; Xing Xu; Xuan Ma; Xiqun Lu
Presenter
LI, H. - Harbin Engineering University
Presentation details
Effect of Additive Manufacturing Process (SLM vs. LMD) on Cavitation Erosion Resistance of SS316L
15:20 - 15:40 Oral presentation
Authors
Anderson Geraldo Marenda Pukasiewicz; Hipolito Carvajal Fals; Jeferson Trevisan Pacheco; Marcio Ferreira Hupalo; José Henrique Teixeira
Presenter
Teixeira, J.H. - Universidade Estadual de Ponta Grossa
Evaluation of the tribological performance and compatibility of lubricants in an electric vehicle (EV) component
14:40 - 15:00 Oral presentation
Authors
Auezhan Amanov; Md Sadman Sadab; Charler Nutakor; llya Petrov; Jussi Sopanen; Emil Kurvinen
Presenter
AMANOV, A. - Tampere University
Presentation details
Enhanced Tribological Performance of Fluorine-Doped Diamond-Like Carbon Films on Rough Stainless Steel Substrates
15:00 - 15:20 Oral presentation
Authors
Bruno Borges Ramos; Gisele Hammes; Cristiano Binder; José Daniel Biasoli Mello
Presenter
RAMOS, B. B. - Universidade Federal de Santa Catarina
Presentation details
Enhancing the tribological performances of aviation gears via tailored surface texturing
15:20 - 15:40 Oral presentation
Authors
Qingwen Dai; Wei Huang; Xiaolei Wang
Presenter
DAI, Q.W. - Nanjing University of Aeronautics & Astronautics
Presentation details
Experimental and Numerical Investigation of Tribological Performance and Failure Mechanisms in Nanocomposite Coatings
15:40 - 16:00 Oral presentation
Authors
Zulfiqar Khan
Presenter
Zulfiqar Khan - Bournemouth University
Presentation details
Development of Thixotropic Materials based Eco-friendly Lubricants
14:00 - 14:20 Oral presentation
Authors
Arun Kumar; Vivek Kumar; Yogesh M. Joshi; Manjesh Kumar Singh
Presenter
SINGH, M. K. - Indian Institute of Technology Kanpur
Presentation details
Comparative Tribology Characterization of Hydrogen-Charged Steels
14:20 - 14:40 Oral presentation
Authors
Pedro Lucas Gomes de Souza Silveira; Salete Martins Alves
Presenter
SILVEIRA, P. L. G. D. S. - Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte, Universidade Federal do Rio Grande do Norte
Presentation details
Plasma Nitriding of API X70 Steel for Hydrogen Transport Applications: Effects on embrittlement and tribological performance
14:40 - 15:00 Oral presentation
Authors
Cris Maria Aureliano Marques Albuquerque; Salete Martins Alves
Presenter
, C. M. A. M. A. - Universidade Federal do Rio Grande do Norte
Presentation details
Effects of Copper Oxide Nanoparticles Additives on the Lubricity of BiodieselFuel
15:00 - 15:20 Oral presentation
Authors
Luiz Eduardo Gabriel da Costa; DERYKY FLAVIO FERNANDES DA SILVA; Salete Martins Alves
Presenter
COSTA, L. E. G. D. - Universidade Federal do Rio Grande do Norte
Presentation details
Avocado oil as a sustainable base for top-of-rail friction modifiers
15:20 - 15:40 Oral presentation
Authors
Roman Nevshupa; Juan Camilo Velez Molina; Juan Felipe Santa Marín; Alejandro Toro
Presenter
NEVSHUPA, R. - CSIC
Presentation details
Friction and wear behaviour of fully bio-based nanocellulose composites
15:40 - 16:00 Oral presentation
Authors
Lucas Maximilian Kneissl; Mitjan Kalin; Nazanin Emami
Presenter
KNEISSL, L. M. - Luleå University of Technology, University of Ljubljana
Presentation details
A COMPARATIVE STUDY OF ROLLING-CONTACT FATIGUE–INDUCED WEAR INTEMPERED LOWER BAINITE, UPPER BAINITE, AND PEARLITE
14:00 - 14:20 Oral presentation
Authors
Samuel da Silva de Souza; Kazim Yildirimli; Kate Tomlinson; Roberto Martins de Souza; Roger Lewis; Hélio Goldenstein
Presenter
GOLDENSTEIN, H. - Universidade de São Paulo
Presentation details
Mechanisms of material removal in Nd-Fe-B permanent magnet
14:20 - 14:40 Oral presentation
Authors
Erick Cardoso Costa; Ygor Gabriel da Silveira Romeiro; Leonardo Silva Duarte; Roberto Martins de Souza; Paulo Antônio Pereira Wendhausen; Fabio Antonio Xavier
Presenter
COSTA, E. C. - Universidade Federal de Santa Catarina
Presentation details
Wear mechanisms of Si3N4 cutting tool in milling of austempered ductile iron
14:40 - 15:00 Oral presentation
Authors
Erick Cardoso Costa; José Alexandre Bento
Presenter
COSTA, E. C. - Universidade Federal de Santa Catarina
Presentation details
In-situ High Resolution Digital Image Correlation (HRDIC) Analysis of Strain Distribution Around Artificially Generated WEL in Advanced Rail Steels
15:00 - 15:20 Oral presentation
Authors
Lucas Biazon Cavalcanti; Jack Donoughue; Sefer Can Erman; Kamran Mumtaz; David Fletcher; Roger Lewis; Kate Tomlinson
Presenter
BIAZON, L. - University of Sheffield
Presentation details
Investigation on the Shoulder Wear Mechanism of SR-20 Aircraft Tires Under Thermo-Mechanical Coupling
15:20 - 15:40 Oral presentation
Authors
Guangjie Fan
Presenter
FAN, G. - Civil Aviation Flight University of China
Presentation details
Bringing the Dead Zone to Life: In-Situ Visualization of Interfacial Stagnation in Metal Cutting
15:40 - 16:00 Oral presentation
Authors
Rachid Msaoubi
Presenter
MSAOUBI, R. - Lund University
Presentation details
Uncertainty quantification and surrogate modelling for wind turbine journal bearings
14:00 - 14:20 Oral presentation
Authors
Leonardo Medeiros Xavier; João Carlos Fernandes de Queiróz; Suhaib Ardah; Francisco José Profito
Presenter
XAVIER, L. M. - Universidade de São Paulo
Presentation details
Tribocorrosion and Multidegradation Behavior of Austenitic and Super-Duplex Stainless Steels
14:20 - 14:40 Oral presentation
Authors
Nuria Espallargas; Hamid Khanmohammadi
Presenter
ESPALLARGAS, Nuria - Norwegian University of Science & Technology (English)
Presentation details
Functionalized Graphene-Derived Nano-additives as Solid Lubricants in UHMWPE composites
14:40 - 15:00 Oral presentation
Authors
Antoine Foucault-Castelli; Lucas Maximilian Kneissl; Pablo Manuel Martínez Rubio; Nazanin Emami
Presenter
MARTÍNEZ-RUBIO, P. M. - Lulea University of Technology / Luleå tekniska universitet
Presentation details
Wear Performance of Coated Surfaces Under High-Pressure
15:00 - 15:20 Oral presentation
Authors
Alaaeddin Al Sheikh Omar; Ardian Morina; Ajay Pratap Singh Lodhi; Liuquan Yang
Presenter
Al Sheikh OMAR, A. - University of Leeds
Presentation details
Chemical analysis of the degradation of green lubricants in tribological tests