PROGRAM
All Symposia / Surface Metrology and Contact Mechanics
All Symposia Complete Program Search Presentation

03 Surface Metrology and Contact Mechanics

14:0017:10
14:00 - 17:10
14:00 - 17:10
  • ITC - Meeting - ITC in section meeting
18:0019:30
18:00 - 19:30
18:00 - 19:30
  • W - Welcome Reception
09:0009:45
09:00 - 09:45
09:00 - 09:45
  • O - Opening Ceremony
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:50
12:40 - 13:50
12:40 - 13:50
  • SL - Sponsor Lecture
14:4016:00
OCEANIA-VIII
14:40 - 16:00
Surface Metrology and Contact Mechanics - Session 01
14:40 - 16:00
  • 14:55 - 15:20Invited Speaker
    4EBF - Active Bio-Contact Mechanics and Regenerative Rehabilitation of Osteoarthritic Joints
    POPOV, V. L. - Technische Universität Berlin, Tsinghua University
  • 15:20 - 15:40Oral presentation
    4DNP - Linking Current Density to Wettability and Tribological Properties of Anodized 5083-Aluminum Alloys
    ABID, M. - Université de Technologie de Tarbes
  • 15:40 - 16:00Oral presentation
    4DTJ - Efficient characterization of extreme pressure properties of lubricants using advanced 4-ball test methodology
    KHOSLA, T. - Rtec Instruments Inc.
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4018:40
OCEANIA-VIII
16:40 - 18:40
Surface Metrology and Contact Mechanics - Session 02
16:40 - 18:40
  • 16:40 - 17:00Oral presentation
    4DWN - Multimode Visible Optical Force Microscopy for Characterization of Two-Dimensional Materials and Nano Through-Silicon Vias
    TAN, X. - Tsinghua University
  • 17:00 - 17:20Oral presentation
    4DZB - The Λ*-ratio for circular EHL contacts: robustness, sensitivity, and validity
    HANSEN, J. - Lulea University of Technology / Luleå tekniska universitet, TRATON Group
  • 17:20 - 17:40Oral presentation
    4E2E - Analyzing an entire scratch cross-sectionally in a TiN film
    WU, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
  • 17:40 - 18:00Oral presentation
    4E4M - Angle-Resolved and Feature-Based Approaches to Surface Texture Analysis - A Correlation Study
    EIFLER, M. - IU International University of Applied Sciences
  • 18:00 - 18:20Oral presentation
    4F4E - Sliding contact temperature determination using acicular grindable thermocouple and inverse heat conduction
    NOSKO, O. - Gdansk University of Technology / Politechnika Gdanska
  • 18:20 - 18:40Oral presentation
    4F6E - Partial Slip in Tangential Contact of an Elastic Quarter-Space
    LI, Q. - Technische Universität Berlin
18:2019:20
18:20 - 19:20
18:20 - 19:20
  • YRT - Forum Young Tribologists - Roundtable Meentoring
19:3021:30
19:30 - 21:30
19:30 - 21:30
  • FYT - Forum Young Tribologists - Evening
09:3010:50
OCEANIA-VIII
09:30 - 10:50
Surface Metrology and Contact Mechanics - Session 03
09:30 - 10:50
  • 09:40 - 10:10Keynote Speaker
    4FD6 - Keynote talk - Prof. Tevis Jacobs
    JACOBS, T. - University of Pittsburgh
  • 10:10 - 10:30Oral presentation
    4EAR - A Review of Asperity Persistence, Fully Plastic Real Contact Pressure and Hardness
    JACKSON, R. L. - Auburn University
  • 10:30 - 10:50Oral presentation
    4EAY - Can we trust optical profilometry for tribofilm topography measurements? A polymer transfer film case study
    YAP, K. K. - Imperial College London
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
10:5011:30
America
10:50 - 11:30
Session
Poster Session 01
Poster Session 01
10:50 - 11:30
  • 4E2D - Study on the relationship between viscosity, wear debris, and lubrication regimes under three-body lubricated conditions
    HORNG, J. H. - National Cheng Kung University
    Track: 03 - Surface Metrology and Contact Mechanics
11:3012:30
OCEANIA-VIII
11:30 - 12:30
Surface Metrology and Contact Mechanics - Session 04
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4EC4 - Applying Persson’s model for manufacturing metal-polymer bonded contacts
    PINTAUDE, G. - Universidade Tecnológica Federal do Paraná
  • 11:50 - 12:10Oral presentation
    4ECT - Effect of Friction Stir Processing parameters on tribological behavior of copper
    RODRIGUES, G. B. - Université Marie et Louis Pasteur
  • 12:10 - 12:30Oral presentation
    4ECV - Triboinformatics: Topological Data Analysis for rough surfaces
    NOSONOVSKY, M. - University of Wisconsin-Milwaukee
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:40
12:40 - 13:40
12:40 - 13:40
  • SL - Sponsor Lecture
14:0014:40
EUROPA III-IV
14:00 - 14:40
Peter Jost Award
14:00 - 14:40
  • 4FCM - How Surface Topography and Chemistry Control Lubrication
    CAYER-BARRIOZ, J. - Ecole Centrale de Lyon
14:4016:00
OCEANIA-VIII
14:40 - 16:00
Surface Metrology and Contact Mechanics - Session 05
14:40 - 16:00
  • 14:40 - 15:00Oral presentation
    4EDK - Effect of pigment volume concentration on scratch resistance of polyurethane and polyester coil coatings paint.
    MILLE, N. - Université de Strasbourg
  • 15:00 - 15:20Oral presentation
    4EGN - Theoretical and experimental study of the roughness effect in normal contact of deformable bodies
    BUKOVSKII, P. - Ishlinsky Institute for Problems in Mechanics RAS
  • 15:20 - 15:40Oral presentation
    4EKF - Friction reduction of paraffin-based mineral oils in low-temperature environments
    DAICHI, M. - Nagoya University
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4018:00
OCEANIA-VIII
16:40 - 18:00
Surface Metrology and Contact Mechanics - Session 06
16:40 - 18:00
  • 16:40 - 17:00Oral presentation
    4ENY - Effect of non-stationary frictional heating on contact of viscoelastic coatings
    TORSKAYA, E. - Ishlinsky Institute for Problems in Mechanics RAS
  • 17:00 - 17:20Oral presentation
    4ENZ - Mechanics-Driven Design of Patterned Steel Floor Plates for Enhanced Slip Resistance and Fatigue Durability
    QIAN, L. - Imperial College London
  • 17:20 - 17:40Oral presentation
    4EPW - Durability study on haptical features of coatings of product and its surface
    WEINHOLD, P. D. W. - Institute of Surface Product Analysis
  • 17:40 - 18:00Oral presentation
    4ESY - In-situ measurement of ultra-thin lubricant films under extreme loads in large water-lubricated graphite bearings
    DOU, P. - Imperial College London, Xi'An Jiaotong University
18:0019:30
18:00 - 19:30
18:00 - 19:30
  • RT - Round table International Cooperation
09:3010:50
OCEANIA-VIII
09:30 - 10:50
Surface Metrology and Contact Mechanics - Session 07
09:30 - 10:50
  • 09:45 - 10:10Invited Speaker
    4FDA - Invited talk - Mohamed EL Mansori
    MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
  • 10:30 - 10:50Oral presentation
    4EXK - Effect of Surface Roughness on Scuffing Damage in Rolling-Sliding Contacts
    FAZZIO, O. - Imperial College London
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
11:3012:30
OCEANIA-VIII
11:30 - 12:30
Surface Metrology and Contact Mechanics - Session 08
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4EXR - A Probabilistic Metrological Framework Linking Surface Topography Transition to Functional Tribological Performance
    GRABON, W. A. - Rzeszow University of Technology
  • 11:50 - 12:10Oral presentation
    4EYF - Rare-earth-based luminescent sensors for tribological applications
    DESCARTES, S. - Institut national des Science Appliquées de Lyon
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:40
12:40 - 13:40
12:40 - 13:40
  • SL - Sponsor Lecture
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
19:3022:30
19:30 - 22:30
19:30 - 22:30
  • GD - Gala Dinner
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
10:5011:30
America
10:50 - 11:30
Session
Poster Session 05
Poster Session 05
10:50 - 11:30
  • 4DRN - Metrological Reliability of In-Situ Penetration Depth in Scratch Testing of Biomedical Polymers: Effects of Device Compliance and Indenter Geometry
    KAPPS, V. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4DTN - New methodology to assess the slip-rolling fatigue resistance of materials and thin film coatings in an oscillating benchtop tribometer
    KHOSLA, V. - Rtec Instruments Inc.
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4DTS - 3D Characterization of Leaf Surfaces for Particle Capture Analysis
    Manuela Lopes Gennesseaux - Gustave Eiffel University
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EBY - Analysis of skewness (Rsk) and kurtosis (Rku) parameters and diameter and cylindricity deviations in the dry drilling of Al-Mg-Si 6351-T6 alloy
    BA, E. C. T. - Universidade Federal de Uberlândia
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EC6 - AI-Assisted Metrology of Adhesive Wear in UHMWPE and Its Correlation with Friction
    CHAVES, R. D. S. M. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4ECF - 3BoImPro: 3rd Body Image Processing, an image processing tool dedicated to third body analysis in tribology
    ALIZÉE, B. - Institut national des Science Appliquées de Lyon, Laboratoire de Mécanique des Contacts et des Structures
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EFM - Spectral Analysis of Micromilled Surface Roughness
    ALONSO, T. - Universidade Federal de Uberlândia
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EJT - Scratch-Based Ranking of UHMWPE Grades and Its Relation to Viscoelastic and Cyclic Contact Response
    KAPPS, V. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EJZ - Tribometrological Ranking of Dental Resin Composites After Simulated Clinical Polishing Based on Functional Roughness Parameters
    Maru, M.M. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EKE - Surface Metrology as an Indirect Descriptor of Two-Body Abrasive Response in Steels and Gray Cast Iron under Standardized Manual Grinding
    LEAL, D. V. F. - National Institute of Metrology, Quality and Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EPK - Tribological Evaluation of Skin–Textile Contact under Different Counterbody Geometries
    J.G.Salinas-Cabrera - Instituto Politecnico Nacional
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EVV - Surface Texture and Wear Behavior of a Zr-Modified AlSi5Cu2Mg Aluminum Alloy under Lubricated Sliding Conditions
    MADEJ, M. - Kielce University of Technology
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4EWF - Surface integrity assessment of additively manufactured 316L after grinding
    Oliveira, M. V. - Universidade Federal de Uberlândia
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4F22 - Nanoindentation of AC-HVAF-Sprayed IN625: Experimental Measurements and Numerical Modeling
    GAMBOA, E. G. - CINVESTAV
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4F2B - Summit-counting method for statistical prediction of the coefficient of friction under mixed EHL conditions
    FERNANDES, C. M. - Universidade do Porto
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4F6D - The Influence of Volume Conservation on the Stiffness of DC01 Steel Surfaces Under Large Deformations
    OLIVEIRA, E. Y. G. - Universidade Federal de Pelotas
    Track: 03 - Surface Metrology and Contact Mechanics
  • 4FBZ - An experimental approach for quantifying the mechanical strength of fretting-induced adhesion junctions
    ZABIHI, A. - Tampere University
    Track: 03 - Surface Metrology and Contact Mechanics
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:40
12:40 - 13:40
12:40 - 13:40
  • SL - Sponsor Lecture
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:40
12:40 - 13:40
12:40 - 13:40
  • SL - Sponsor Lecture
16:3016:45
16:30 - 16:45
16:30 - 16:45
  • ASME - 2026 ASME International Mayo D. Hersey Award Ceremony
16:4517:30
16:45 - 17:30
16:45 - 17:30
  • CS - Closing Session & Awards