PROGRAM
All Symposia / Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
All Symposia Complete Program Search Presentation

06 Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits

14:0017:10
14:00 - 17:10
14:00 - 17:10
  • ITC - International Tribology Council in session meeting
18:0019:30
18:00 - 19:30
18:00 - 19:30
  • W - Welcome Reception
09:0009:45
09:00 - 09:45
09:00 - 09:45
  • O - Opening Ceremony
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 01
14:40 - 16:00
  • 14:50 - 15:20Keynote Speaker
    4FDG - Tribo-surface and volume properties of laser powder bed fused (LPBF) H13 tool steel in hot die-casting applications
    MANSORI, M. E. - École Nationale Supérieure des Arts et Métiers
  • 15:20 - 15:40Oral presentation
    4DMG - How to understand the influence of ammonia on piston ring-liner tribology system?
    MA, X. - Harbin Engineering University
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4018:20
EUROPA III-IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 02
16:40 - 18:20
  • 16:40 - 17:00Oral presentation
    4DN2 - Integration of Electric Arc Furnace (EAF) Steel Slag into Friction Materials: Tribological Properties, Wear, and Emissions
    Giovanni Straffelini - University of Trento
  • 17:00 - 17:20Oral presentation
    4DPD - Surface analysis deployment for automotive brake system assessment
    Ana Paula Gomes Nogueira - Brembo NV
  • 17:20 - 17:40Oral presentation
    4DPG - Influence of Residual Cobalt Distribution on the Tribological Performance of PDCs Treated by Ultrasonic-Electrochemical and Acid-Leaching Methods
    Ying Yang - China University of Geosciences
  • 17:40 - 18:00Oral presentation
    4DV2 - Atomic Level Material Removal Mechanism of Chip Surface
    QIAN, L. - Southwest Jiaotong University
  • 18:00 - 18:20Oral presentation
    4DV4 - Influence of steel cleanliness on the sliding wear resistance of railway wheels
    João Vitor Raimundo Silva e Silva - Universidade Federal do Espírito Santo
18:2019:20
18:20 - 19:20
18:20 - 19:20
  • YRT - Forum Young Tribologists - Roundtable Mentoring
19:3021:30
19:30 - 21:30
19:30 - 21:30
  • FYT - Forum Young Tribologists - Evening
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 03
09:30 - 10:50
  • 09:30 - 09:50Oral presentation
    4DPN - Heat-Treatment Effects on Microstructure and Wear of L-PBF 316L Stainless Steel
    German Omar Barrionuevo - Universidad San Francisco de Quito
  • 09:50 - 10:10Oral presentation
    4DQ6 - Predicting as-built surface topography in laser powder bed fusion using in-situ thermography and thermal simulations
    RAEYMAEKERS, B. - Virginia Polytechnic Institute and State University
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 04
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4DRR - AISI 420S Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated States: Characterization and Tribological Performance
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • 11:50 - 12:10Oral presentation
    4DSA - Experimental investigation of tire-wear particle sizes
    GACHOT, C. - Technische Universität Wien
  • 12:10 - 12:30Oral presentation
    4ETE - Green Stainless Steels as Wear Resistant Materials for Erosion-Corrosion Applications in the Agribusiness Sector
    SOUZA, V. P. D. - Aperam South America, Universidade Federal de Minas Gerais
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
12:4013:40
12:40 - 13:40
12:40 - 13:40
  • SL - Sponsor Lecture - Anton Paar
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 05
14:40 - 16:00
  • 14:40 - 15:00Oral presentation
    4DQZ - Development of a Wear Test Method for Emulsion Performance Evaluation
    Lais M. Lopes - Falex Tribology
  • 15:00 - 15:20Oral presentation
    4DVV - Comparison of severe and mild wear test conditions for assessing low-stress sliding mild abrasive wear of commercial transfer chute lining materials
    Jose Jimmy Penagos - Instituto Tecnológico Vale
  • 15:20 - 15:40Oral presentation
    4DWF - Influence of counterpart and oil formulation on wear of DLC-coated differential shafts for electric vehicles
    DUFILS, J. - IREIS - HEF Group
  • 15:40 - 16:00Oral presentation
    4DWP - Tribological Comparison of Pantograph Contact Materials for Railway Sliding Electrical Interfaces
    OUMER, O. - Université Marie-et-Louis-Pasteur
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4018:00
EUROPA III-IV
16:40 - 18:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 06
16:40 - 18:00
  • 16:40 - 17:00Oral presentation
    4DWR - Atomistic study of material removal behavior during ultrasonic vibration assisted nanoscratching of single-crystal AlN
    XIAO, C. - Southwest Jiaotong University
  • 17:00 - 17:20Oral presentation
    4DWZ - Mechanistic analysis and data-driven prediction of churning losses in multi-shaft transmission systems
    ZHANG, W. - Tsinghua University
  • 17:20 - 17:40Oral presentation
    4DXM - Predicting the Evolution of Fretting Wear in Spline Couplings Under Representative Conditions
    GICHUKI, A. - University of Nottingham
  • 17:40 - 18:00Oral presentation
    4DXT - Hydrogen-Related Alterations in Aluminum Alloy Piston Materials for Hydrogen Combustion Engines Following Deuterium Irradiation
    MATSUMOTO, Y. - Tokyo City University
18:0019:30
18:00 - 19:30
18:00 - 19:30
  • RT - Round table International Cooperation
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 07
09:30 - 10:50
  • 09:30 - 09:50Oral presentation
    4DZT - Airborne wear particle emissions from a light aircraft brake
    TSYBRII, Y. - Gdansk University of Technology / Politechnika Gdanska
  • 09:50 - 10:10Oral presentation
    4E2V - Manufacturing of hybrid bearing washers using a novel carbide containing alloy
    FAQIRI, Y. - Universität Hannover
  • 10:10 - 10:30Oral presentation
    4E42 - Performance Evaluation of transfer learning for surface damage identification in tribological systems
    MOHAMMAD-POUR, Mahdi - TriboDENS ltd
  • 10:30 - 10:50Oral presentation
    4E4B - Experimental and Numerical Investigation of Biodegradable Hydraulic Lubricant Performance in Axial Piston Pumps
    MARTINS FERREIRA, P. - TotalEnergies
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
10:5011:30
America
10:50 - 11:30
Session
Poster Session 03
Poster Session 03
10:50 - 11:30
  • 4DYB - Laser Cladding Effects on Abrasive Wear Resistance of Hardox 400 Steel
    ULBRICH, D. - Poznan University of Technology
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4DZQ - Sand-Slurry Erosion of Corrosion-Resistant Alloys at a Shallow Impact Angle
    DANTAS, N. V. - Universidade Federal do Espírito Santo
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4DZX - Abrasive and erosive wear caused by iron ore slurries with varied silica content on high chromium cast iron: influence of iron ore geology
    BARBOSA, P. R. - Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4E4K - Abrasiveness and Geology of Brazilian Iron Ores: Considerations Based on the Miller Abrasiveness Test
    BARBOSA, P. R. - Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4E6R - Surface Integrity in Micromilling of NiTinol for Medical Applications
    LOPES, J. D. S. - Universidade Federal de Uberlândia
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EBP - Assessment of abrasive wear resistance of RAVUR250HR, SAE1045, and HSLA501 steels
    MURARI, F. D. - USIMINAS
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EDF - Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions
    BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EEC - Effect of Deformation-Induced Changes in Elasto-Plastic Properties on Galling Resistance of AISI 304 Stainless Steel
    PRIETO, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EFZ - Comparative Study of the Mechanical and Tribological Properties of Recycled and Conventional Filaments in 3D Printing
    SOUZA, J. R. D. - Universidade Federal Rural do Semi
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EGX - Innovative Green Ingredients for Sustainable Automotive Brake Friction Materials
    NOGUEIRA, A. P. G. - Brembo NV
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EH2 - Hardness and alumina content determine the Low-Stress Sliding Abrasion wear in commercial ceramics for transfer chute linings?
    DIAS-BATISTA, L. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EKJ - Comparison of Abrasive Wear in Conveyor Belt Splices Using Two Experimental Methods
    ZINATO, N. L. - Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EKN - Research on Image Algorithm for the Extraction of the Motion Trajectory of Bearing Cages
    YAN,B. - Chang'an University
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EMK - Tribological Interaction in W–Cu Sintered Composites: Role of Cu Nanoflakes in W Particle Adhesion and Resistance to Particle Detachment
    BRIONES, F. C. - Pontificia Universidad Católica de Valparaíso
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EN2 - Grinding Performance of a Structured Wheel with Internal Cooling Channels
    SOARES, D. F. - Associate Laboratory, Center for MicroElectromechanical Systems
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EPC - Tribological Characterization of Bi-Functional Abrasive Composite
    CAPELA, P. A. - University of Minho
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EQS - Sclerometry as a method to evaluate the grindability of HSS applied for tap tools
    STREY, N. F. - Universidade Federal do Espírito Santo
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4ESQ - Investigating Bearing Surface Damage via Coupled Electro-Thermal Analysis
    ESHRAGHI, H. - Flanders Make, Ghent University / Universiteit Gent
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EVP - Blickensderfer’s methodology in a field wear test to evaluate wear-resistant materials for transfer chute linings
    PENAGOS, J. J. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EVW - Abrasive wear of conveyor belt rubber materials used in an iron ore processing plant
    SANTOS, Y. L. D. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EXD - Experimental approaches to system-level identification of tribological parameters in automotive friction torsional vibration dampers
    FORMELA, M. T. - Eaton Mobility Group, Gdansk University of Technology / Politechnika Gdanska
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EYX - A CFD–DEM simulation study of abrasive wear in iron ores slurry controlvalves
    LIMA, L. F. B. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4EZT - Experimental and Numerical Analysis of the Influence of Surface Morphology on the Tribological Behavior and Contact Mechanics of Polyurethane Rail Pads
    VICENTE, A. D. F. N. - Instituto Tecnológico Vale
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4FAR - Tool Wear Mechanisms when turning Ti-6Al-4V alloy
    KWON, P. - San Diego State University
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4FAV - Influence of Surface Pre-Treatment on Wear Resistance of Patinas Formed on Weathering Steel under Atmospheric Exposure
    LUZ, F. K. C. - Universidade Federal do Rio Grande
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4FAZ - Impact of grinding stone topography on rail surface integrity
    BIAZON, L. - University of Sheffield
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
  • 4FBV - A preliminary research of laser DED repairing and its mechanical properties aiming remanufacturing
    TEI, Y. - Japan Advanced Institute of Science & Technology
    Track: 06 - Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 08
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4E4G - Tribo-rheological and thermal characterization of vegetable oil in water microemulsions as a potential water-based fluid for metalworking applications
    J. A. FRIAS-FLORES - Instituto Politécnico Nacional
  • 11:50 - 12:10Oral presentation
    4E4J - Tribomechanical Evaluation of FeCrNiMo Alloy Reinforced with WC Deposited by L-DED
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • 12:10 - 12:30Oral presentation
    4E4Q - Atomic material removal mechanism in ultra-precision chemical mechanical polishing of bearings and gears
    JIANG, L. - Southwest Jiaotong University, Yanghua Zhizao (Sichuan) Innovation Technologies Co., Ltd.
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 09
14:40 - 16:00
  • 14:40 - 15:00Oral presentation
    4E62 - Effect of heat treatment on the tribocorrosion behavior of 20Cr13 martensitic stainless steel
    JIANG, S.L. - Institute of Metal Research, Chinese Academy of Sceinecs
  • 15:00 - 15:20Oral presentation
    4E64 - Tribocorrosive wear behavior of grinding media in Miller Test
    GUIMARÃES, M.L.S.S. - Universidade Federal de Ouro Preto
  • 15:20 - 15:40Oral presentation
    4E6G - Analyses of the coupling between thermomechanical and tribological processes during a railway braking test
    CRISTOL, A.-L. - Centrale Lille
  • 15:40 - 16:00Oral presentation
    4E6N - Investigation of the Influence of Stress Relaxation Behavior on Radial Stress in Nonwoven Fabric Winding Processes.
    NISHIOKA, S. - Tokai University
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4018:20
EUROPA III-IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 10
16:40 - 18:20
  • 16:40 - 17:00Oral presentation
    4EAZ - Atomic-scale Tribochemical Differences During Chemical Mechanical Polishing of Copper and Silicon in the Integrated Circuits Manufacturing
    ZHANG, L. - Tsinghua University
  • 17:00 - 17:20Oral presentation
    4EBX - Tribological Behavior and Iron Ore Flow on UHMWPE Materials for Truck Body Liners
    SILVA, K. F. C. - Instituto Tecnológico Vale
  • 17:20 - 17:40Oral presentation
    4EC2 - Improved high-temperature solid particle erosion resistance of Hadfield steel by boriding
    Hernández-Peña, A. - Tecnológico de Monterrey
  • 17:40 - 18:00Oral presentation
    4ECX - The impact of spin on elastohydrodynamic contacts for traction: A Theoretical and Experimental Investigation of Ball-Disc Contact
    CARBONE, G. - Nanjing University of Science & Technology
  • 18:00 - 18:20Oral presentation
    4EDX - Flexible, transparent and conductive silver line electrodes fabricated using surface energy-directed assembly process on polyethylene naphthalate substrates
    WANG, Y. - Tsinghua University
19:3022:30
19:30 - 22:30
19:30 - 22:30
  • GD - Gala Dinner
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 11
09:30 - 10:50
  • 09:30 - 09:50Oral presentation
    4EEJ - Elastohydrodynamic lubrication friction dependence on energy density and build orientation for SLM printed AlSi10Mg and 18Ni300
    KLANJSCEK, U. - University of Ljubljana
  • 09:50 - 10:10Oral presentation
    4EEX - Application of Sliding Abrasion Tumbler Test in the evaluation of abrasive wear resistance of commercial ceramic materials used in transfer chute linings.
    Dias-Batista, L. - Instituto Tecnológico Vale, Universidade Federal de Ouro Preto
  • 10:10 - 10:30Oral presentation
    4EEY - Insights on the wear behavior of rolling element bearings containing mixed-material contact interfaces
    EVANS, R. D. - The Timken Company
  • 10:30 - 10:50Oral presentation
    4EFX - In-situ NbC-reinforced self-lubricating iron matrix composites via vacuumimpregnation
    DESCHAMPS, I. S. - Universidade Federal de Santa Catarina
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 12
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4EG2 - Microstructural and tribological investigation of niobium carbide-reinforced copper-free brake friction material produced by powder metallurgy
    VIDAL, A. A. - Universidade Federal de Santa Catarina
  • 11:50 - 12:10Oral presentation
    4EGJ - Practical Experiences with the Service Life of Greases at High Temperatures
    VALDAUF, J. - LUBRICANT s r.o.
  • 12:10 - 12:30Oral presentation
    4EGR - Putting boundary friction effects into cold strip rolling mixed lubrication models
    MONTMITONNET, P. - MINES Paris, PSL University, Centre for material forming (CEMEF)
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:4016:00
EUROPA III-IV
14:40 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 13
14:40 - 16:00
  • 14:40 - 15:00Oral presentation
    4EHC - Abrasive wear of Fe–SiC cermets processed by hot pressing and spark plasma sintering
    Oropesa. Y - Universidad de Concepción
  • 15:00 - 15:20Oral presentation
    4EHP - A Universal Strategy for Uniform Patterning of Diverse Functional Materials via Controlled Marangoni Flow
    WANG, G. - Tsinghua University
  • 15:20 - 15:40Oral presentation
    4EK6 - How Hybrid scCO₂-MQL Lubrication Controls Tribology and Surface Integrity in Ti-6Al-4V Machining
    XU, N. - University of Leeds
  • 15:40 - 16:00Oral presentation
    4EKD - Experimental investigation of a hydrodynamic journal bearing operating under servere conditions
    RAVAUD, L. - Institut Pprime
16:0016:40
16:00 - 16:40
16:00 - 16:40
  • C - Coffee break
16:4018:20
EUROPA III-IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 14
16:40 - 18:20
  • 16:40 - 17:00Oral presentation
    4EKS - Effect of Tempering Treatment on Microstructure and Mechanical Properties of D2 Tool Steel for Wear‑Intensive Applications
    YARASU, V. - Institute of Metals and Technology
  • 17:00 - 17:20Oral presentation
    4EMF - A Surrogate-Based Sensitivity Analysis of Tyre-Pavement Tractive Contact
    CARDOSO DA SILVA, D. - Université de Limoges
  • 17:20 - 17:40Oral presentation
    4ENM - Dry-Sliding Wear Resistance of AISI 410L Martensitic Stainless Steel Additively Manufactured by L-DED in the As-Built and Heat-Treated Conditions
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • 17:40 - 18:00Oral presentation
    4ENQ - Friction Modification on Wet Rails: Adhesion, Wear and RCF
    SKURKA, S. - Brno University of Technology
  • 18:00 - 18:20Oral presentation
    4EPB - Evaluation of Zinc Adhesion on Cast Iron Tool Materials
    BASTOS, P. P. B. - Universidade Federal de Santa Catarina
OCEANIA IV
16:40 - 18:20
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 18
16:40 - 18:20
  • 16:40 - 17:00Oral presentation
    4EVK - The impact of water and hydraulic oil contamination in cold rolling oil on the surface quality of stainless steels.
    FARIA, G. S. - Aperam South America
  • 17:00 - 17:20Oral presentation
    4EWW - Beyond the Friction Coefficient: Creep Curves for Wheel–Rail Friction Assessment
    GALAS, Radovan - Brno University of Technology
  • 17:20 - 17:40Oral presentation
    4EWY - Elastic Compression in Three-Body Line Contact: Reference-Point Selection
    LIU, S. - Sichuan University
  • 17:40 - 18:00Oral presentation
    4EXM - The dominant role of carbide network architecture over chromium content in the scratch response of high-chromium cast irons grinding media
    BORTOLETO, E. M. - Instituto Tecnológico Vale
  • 18:00 - 18:20Oral presentation
    4EXQ - Tribochemical Processing of Carbonates: Advancing Low Carbon and Sustainable Industrial Technologies
    NEVSHUPA, R. - CSIC
09:3010:50
EUROPA III-IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 15
09:30 - 10:50
  • 09:30 - 09:50Oral presentation
    4EPQ - Quantification of Zn adhesion on cast iron for stamping tools
    CARVALHO, D. M. L. - Universidade Federal de Santa Catarina
  • 09:50 - 10:10Oral presentation
    4EQ2 - Effect of Multiple Metallic Powder Reuse Cycles on the Tribological Performance of Additively Manufactured 316L Stainless Steel by L-DED
    SOUSA, J. M. S. D. - Senai Innovation Institute for Manufacturing System and Laser Processing
  • 10:10 - 10:30Oral presentation
    4EQB - From Tribology to Manufacturing: Tribochemistry-Enabled Fabrication of Functional Thin Films
    YUAN, Y. - University of Leeds
  • 10:30 - 10:50Oral presentation
    4EQZ - EFFECT OF WELD DEFECTS IN RAILS ON WEAR NUMBER TGAMMA USING DYNAMIC MULTIBODY MODELING
    RESTREPO-BARRIENTOS, P. - Instituto Tecnológico Metropolitano, Universidad Nacional de Colombia
OCEANIA IV
09:30 - 10:50
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 19
09:30 - 10:50
  • 09:30 - 09:50Oral presentation
    4EYC - Comparison of the Abrasion Resistance of High-Performance Steels Using Ball Cratering Micro-Abrasion
    EUZEBIO, L. S. - Universidade Federal do Rio Grande do Sul
  • 09:50 - 10:10Oral presentation
    4EYN - Erosive Wear of Wire-Based Additively Manufactured 316L Stainless Steel
    BRAGANÇA, B. C. - UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO
  • 10:10 - 10:30Oral presentation
    4F4K - Simulation and Experimental Study on Copper fluid Jet Polishing
    GUO, D. - Tsinghua University
  • 10:30 - 10:50Oral presentation
    4F4M - Effect of Roller Profile Modification on Wear Behavior of Tapered Roller Bearings
    ZUO, K. - Tsinghua University
10:5011:30
10:50 - 11:30
10:50 - 11:30
  • C - Coffee break
11:3012:30
EUROPA III-IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 16
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4ER4 - Synergistic wear mechanisms in grinding media: how does the wear of grinding balls occur?
    CAMPIDELI, V. C. - Instituto Tecnológico Vale
  • 11:50 - 12:10Oral presentation
    4ES2 - Optimisation of EV drivetrain fluids using a system-level efficiency model
    SHORE, J. - Imperial College
  • 12:10 - 12:30Oral presentation
    4ES4 - Study on the Tribological Properties of TiC-316L Composites Prepared by MEAM
    ZHOU, S. - China University of Mining & Technology Beijing
OCEANIA IV
11:30 - 12:30
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 20
11:30 - 12:30
  • 11:30 - 11:50Oral presentation
    4F4W - Comparative evaluation of the abrasive wear response on brake pads of SUV and pickup trucks using a modified ASTM G65 method
    BARRIONUEVO, G. O. - Universidad San Francisco de Quito
  • 11:50 - 12:10Oral presentation
    4F6G - Niobium carbide as allrounder for machining and wear protection
    Eduardo Cannizza - EHT Consultoria em Engenharia Ltda
  • 12:10 - 12:30Oral presentation
    4FDP - Wear analysis of the friction stir welding (FSW) tool for the AA6063 aluminum welding process
    JAIMES, I. G. - Universidad Industrial de Santander
12:3014:00
12:30 - 14:00
12:30 - 14:00
  • A - Lunch
14:0016:00
EUROPA III-IV
14:00 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 17
14:00 - 16:00
  • 14:00 - 14:20Oral presentation
    4ETD - Numerical analysis of thermal fatigue behavior of AISI H13 tool steel produced by Power Bed Laser Fusion (PBF-LB/M)
    LIMA, V. A. D. - Universidade de São Paulo
  • 14:20 - 14:40Oral presentation
    4ETF - Fabrication of Electronics and Sensors using a Surface Energy-Directed Assembly Process
    CHAI, Z. - Tsinghua University
  • 14:40 - 15:00Oral presentation
    4ETP - Stretchable Serpentine Electrodes with High Fidelity Fabricated Using Orientation-Controlled Surface Energy-Directed Assembly
    YUAN, S. - Tsinghua University
  • 15:00 - 15:20Oral presentation
    4ETQ - Evolution of Corrosion-Induced Friction and Wear Mechanisms in Cylinder Liner Material under Methanol Engine Conditions
    LI, H. - Harbin Engineering University
  • 15:20 - 15:40Oral presentation
    4ETS - Effect of Additive Manufacturing Process (SLM vs. LMD) on Cavitation Erosion Resistance of SS316L
    Teixeira, J.H. - Universidade Estadual de Ponta Grossa
OCEANIA IV
14:00 - 16:00
Tribology in Manufacturing, Mining, Transport Systems and Integrated Circuits - Session 21
14:00 - 16:00
  • 14:00 - 14:20Oral presentation
    4F6S - A COMPARATIVE STUDY OF ROLLING-CONTACT FATIGUE–INDUCED WEAR INTEMPERED LOWER BAINITE, UPPER BAINITE, AND PEARLITE
    GOLDENSTEIN, H. - Universidade de São Paulo
  • 14:20 - 14:40Oral presentation
    4FA6 - Mechanisms of material removal in Nd-Fe-B permanent magnet
    COSTA, E. C. - Universidade Federal de Santa Catarina
  • 14:40 - 15:00Oral presentation
    4FAA - Wear mechanisms of Si3N4 cutting tool in milling of austempered ductile iron
    COSTA, E. C. - Universidade Federal de Santa Catarina
  • 15:00 - 15:20Oral presentation
    4FAY - In-situ High Resolution Digital Image Correlation (HRDIC) Analysis of Strain Distribution Around Artificially Generated WEL in Advanced Rail Steels
    BIAZON, L. - University of Sheffield
  • 15:20 - 15:40Oral presentation
    4FBH - Investigation on the Shoulder Wear Mechanism of SR-20 Aircraft Tires Under Thermo-Mechanical Coupling
    FAN, G. - Civil Aviation Flight University of China
  • 15:40 - 16:00Oral presentation
    4FBK - Bringing the Dead Zone to Life: In-Situ Visualization of Interfacial Stagnation in Metal Cutting
    MSAOUBI, R. - Lund University
16:3016:45
16:30 - 16:45
16:30 - 16:45
  • ASME - 2026 ASME International Mayo D. Hersey Award Ceremony
16:4517:30
16:45 - 17:30
16:45 - 17:30
  • CS - Closing Session & Awards