YU, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
16:00
16:40
16:0016:40
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:40
18:00
16:4018:00
OCEANIA IV
16:40 - 18:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 06
16:40 - 18:00
Chair: Mitjan Kalin (UL) - Slovenia
16:40 - 17:00Oral presentation
4DY4 - Tribo-corrosive response of newly developed high entropy ceramic under saline environment
Guruvayurappan, A. - Indian Institute of Technology Delhi
17:00 - 17:20Oral presentation
4DYA - Shaft Sealing Mechanism for Dual-Axis Motion under High-Pressure Conditions
NAKANISHI, Y. - Kumamoto University
17:20 - 17:40Oral presentation
4DYJ - Tailoring the microstructure of MEROX for tribological use in extreme environmental conditions
KUMAR, D. - Indian Institute of Technology Delhi
17:40 - 18:00Oral presentation
4DYQ - Shaft Sealing Mechanism for Low-Speed Motion under High-Pressure Conditions Based on Hydration Boundary Lubrication
H, UCHIZONO. - Kumamoto University
18:00
19:30
18:0019:30
18:00 - 19:30
18:00 - 19:30
RT - Round table International Cooperation
09:40
10:50
09:4010:50
OCEANIA IV
09:40 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 07
09:40 - 10:50
Chair: JAVIER BARRIGA
09:45 - 10:10Invited Speaker
4DTE - Simple Methods for Predicting Mixed and Boundary Friction
Ian Sherrington - University of Lancashire
10:10 - 10:30Oral presentation
4DZR - Multiscale Modelling of Rain Droplet Impact on Wind Turbine Blades
NAMBIAR, V. R. - Ghent University / Universiteit Gent
10:30 - 10:50Oral presentation
4E2K - The formation mechanism, diffusion behavior, properties of the material transfer layer on the rail surface during ultra-high speed sliding electrical contact
CHEN, Deshan - Central South University (Zhongnan University)
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 08
11:30 - 12:30
Chair: Nazanin Emami (LTU) - Sweden
11:30 - 11:50Oral presentation
4E4T - Preparation and Evaluation of Protective Coatings for Aeroengine Blade Tips
DUAN, D. - Institute of Metal Research, Chinese Academy of Sciences
11:50 - 12:10Oral presentation
4E6Y - Morphology-Regulated MoS2/MWCNTs Hybrids for Enhanced Tribological and Mechanical Performance of PEEK Composites under Harsh Environments
HUANG, S. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
12:10 - 12:30Oral presentation
4EAC - Erosion performance of AlSi-based abradable coating
SOUSA, N. D. O. - Concordia University Montreal
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
14:40
16:00
14:4016:00
OCEANIA IV
14:40 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 09
14:40 - 16:00
Chair: Qin Zhao (LICP, CAS) - China
14:40 - 15:00Oral presentation
4EAD - Exploring boron nitride nanotubes as reinforcement to Co-TiC sintered composites at high-tempreature wear against Si3N4 ball counterpart
Tisov, O. - Xi'An Jiaotong University
15:00 - 15:20Oral presentation
4EB2 - Reducing the humidity dependence of friction and wear of graphite-based solid lubricant coatings
DIENWIEBEL, M. - Microtribology Centre
15:20 - 15:40Oral presentation
4EDG - Exploration of Adaptive Tribological Surfaces for Aerospace Applications with In-situ Raman Analysis
VOEVODIN, A. A. - University of North Texas
15:40 - 16:00Oral presentation
4EDH - Tribological Performance Evaluation of Electroplated Copper Coatings for Aerospace Journal Bearing Applications
KARMAKER, H. - Concordia University
16:00
16:40
16:0016:40
16:00 - 16:40
16:00 - 16:40
C - Coffee break
16:00
16:40
16:0016:40
America
16:00 - 16:40
Session
Poster Session 04
Poster Session 04
16:00 - 16:40
4DQA - From Lab to Aerospace Engine Application: A Cost-Effective Approach to Fast-Tracking Abradable Material Qualification
Kaue Bertuol - Concordia University Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DQK - Component-level wear and friction investigation of polymer packing seals exposed to Lunar and Martian regolith simulants
Ádám Kalácska - Ghent University / Universiteit Gent Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DRE - Wear-corrosion resistance of aluminum alloy MAO coating by 3D-printing textured PPUA coatings
Gai Zhao - Nanjing University of Aeronautics & Astronautics Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DXB - Effects of Drilling Parameters on Thermal and Tribological Behavior of Self-Lubricating Impregnated Diamond Bits for Lunar Dry Drilling
GUAN, C. - China University of Geosciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DXR - Biomimetic “soft-hard-soft” gradient interface engineering: multi-stage structural synergies and dual-layer tribofilm modulation for enhanced tribological properties of CF/PTFE composites
YANG M - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4DXZ - Vat photopolymerization 3D printable self-lubricating polyimide
WANG, X. - Lanzhou Institute of Chemical Physics Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E2B - Lubrication materials for advanced nuclear reactors
WANG, P. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E2F - Synergistic Lubrication and Wear Mechanisms of WS2/CaF2 Reinforced lmpregnated Diamond Bit Matrix for Lunar Dry Drilling under High-Temperature Vacuum Conditions
TAN, S. - China University of Geosciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E2S - Study on Regulation of Superlubricity Performance of Hydrogenated Amorphous Carbon-based Films by Trace Doping
ZHANG, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E4N - High temperature lubricity and mechanism of novel glass lubricant
WANG, L. - Northwestern Polytechnical University Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4E6K - Design of an Experimental Setup for Quantifying High-Velocity Droplet Impact Forces
POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EAB - Abrasive Wear of High Density Polyethylene for Offshore Applications
Sales de Oliveira, K. - University of Brasilia Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EAV - Evolution of Friction and Wear Mechanisms of Aerospace sealing Rubber under Thermal–Oxidative Aging
WU, J. - Harbin Institute of Technology, Harbin Institute of Technology at Weihai Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EBQ - Solid Particle Erosion of Plasma-nitrided DLC-coated Superduplex 2507 Stainless Steel and Inconel 718
BRAGANÇA, B. C. - Universidade Federal do Espírito Santo Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EMW - Design of Novel Grease-Based Ultralow Friction and Wear Systems and Their Study in Space Lubrication
Zhang. L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4ENB - Regulation of High-Temperature Adhesion and Static Friction Behaviors of Superalloys via Surface Topography Control
ZOU, Yuhui - Tsinghua University Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EPD - Scratch Adhesion Resistance of DLC Coatings on 2507 Superduplex Stainless Steel and Inconel 718 by PVD and PECVD
SOUSA, F. G. M. - Universidade Federal do Espírito Santo Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4ESW - Engineered Surfaces and Functional Additives for Extreme-Condition and Sustainable Tribological Applications: A Review
KATIYAR, J. K. - Manipal Institute of Technology, Manipal Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4EYB - Friction and Wear Performance of SAE 1070 Steel in Air and Seawater for Flexible Riser Applications
VIEIRA, L. - Instituto Tecnológico de Aeronáutica Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
4FBB - Tribological Properties and Space Environment Effects of Metal dichalcogenide Lubricating Films
WANG, D. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences Track: 07 - Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology
16:40
18:00
16:4018:00
OCEANIA IV
16:40 - 18:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 10
16:40 - 18:00
Chair: Amir Kadiric (IMPERIAL COLLEGE) - United Kingdom (Great Britain)
16:40 - 17:00Oral presentation
4EEA - Contact pressure tribological effect on Bi2S3-MoS2 soft coatings
ROMERO PIETRAFESA, G. - Instituto de Fisica del Sur, Universidad Nacional del Sur
17:00 - 17:20Oral presentation
4EEW - Flow Transport and Film Evolution of Lubricant on a Rotating Disk Across a Broad Temperature Region
WEI, C. - Beijing Institute of Technology
17:20 - 17:40Oral presentation
4EJY - Effect of Sodium Sulfate on Wear of Stainless Steel in High-Temperature and High-Pressure Water-Containing Ethanol Environment
KAWAI, H. - Nagoya University
17:40 - 18:00Oral presentation
4EKP - Dynamics of Cage-free Ball Bearings under acceleration condition
CAO, W. - Sichuan University
19:30
22:30
19:3022:30
19:30 - 22:30
19:30 - 22:30
GD - Gala Dinner
09:30
10:50
09:3010:50
OCEANIA IV
09:30 - 10:50
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 11
09:30 - 10:50
Chair: Henara Lillian Costa (FURG) - Brazil
09:30 - 09:50Oral presentation
4EMY - High-temperature fretting wear behavior of established Tribaloys and a newly developed high-entropy alloy of reduced Cobalt content
WALZ, J. - German Aerospace Center
09:50 - 10:10Oral presentation
4EPN - Glazing of C263 Nickel Superalloy at Extreme Temperatures
HARRISON, J.P. - University of Sheffield
10:10 - 10:30Oral presentation
4EVD - Interfacial Tribofilm Evolution and Thermal–Tribological Enhancement of Nylon Rotating Bands via Graphene Oxide Coatings
Shuang Yi - Nanjing University of Science and Technology
10:30 - 10:50Oral presentation
4EWX - Influence of Hydrogen on the Tribological Behavior of Cast Iron Block/Piston Ring Contacts: First Insights
ARDILA, M. A. N. - Laboratorio de Tecnologia em Atrito e Desgaste
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
11:30
12:30
11:3012:30
OCEANIA IV
11:30 - 12:30
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 12
11:30 - 12:30
Chair: Alice MARINESCU (INSA LYON) - France
11:30 - 11:50Oral presentation
4EYA - Experimental investigation of wear behaviour and debris evacuation in an aerospace-grade material pair under high-temperature conditions
Marinescu A. - Institut national des Science Appliquées de Lyon
11:50 - 12:10Oral presentation
4EZ6 - Tribological behavior of a a-C coated AISI 4340 under seawater lubricated conditions for Oil and Gas Injection Valves
FREIRE, A. D. - Universidade de São Paulo
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
14:40
16:00
14:4016:00
OCEANIA IV
14:40 - 16:00
Tribology of Extreme Environments: Aero-tribology, Ocean tribology and Space Tribology - Session 13
14:40 - 16:00
14:40 - 15:00Oral presentation
4F6F - Effects of Hydrogen Aging on the Tribology of Molybdenum Disulfide (MoS2)
KRICK, B.A. - Florida Agricultural & Mechanical University, Florida State University
15:20 - 15:40Oral presentation
4FBF - Fretting Wear of High-Temperature Coatings in Flat-on-Flat Contacts for Gas Turbine Blade Tip Applications
Lavella, M. - Università degli Studi di Bergamo
15:40 - 16:00Oral presentation
4FBQ - Friction and Wear Failure Mechanism Analysis of SR20 Aircraft Brake Pair
LIU, J. - Civil Aviation Flight University of China
16:00
16:40
16:0016:40
16:00 - 16:40
16:00 - 16:40
C - Coffee break
10:50
11:30
10:5011:30
10:50 - 11:30
10:50 - 11:30
C - Coffee break
12:30
14:00
12:3014:00
12:30 - 14:00
12:30 - 14:00
A - Lunch
12:40
13:40
12:4013:40
12:40 - 13:40
12:40 - 13:40
SL - Sponsor Lecture
16:30
16:45
16:3016:45
16:30 - 16:45
16:30 - 16:45
ASME - 2026 ASME International Mayo D. Hersey Award Ceremony
16:45
17:30
16:4517:30
16:45 - 17:30
16:45 - 17:30
CS - Closing Session & Awards
Presentation details
ITC in section meeting
14:00 - 17:10
Reunião do ITC
Presentation details
Welcome Reception
18:00 - 19:30
Welcome Reception
Presentation details
Opening Ceremony
09:00 - 09:45
Opening Ceremony
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:50
Sponsor Lecture
Presentation details
Long Life Liquid-Like Solid Lubricants for Extreme Space Environments
14:50 - 15:20 Keynote Speaker
Authors
Christopher DellaCorte; Juan Bosch-Giner
Presenter
Christopher DellaCorte - University of Akron
Presentation details
A self-adaptive supramolecular gel lubricating material for space applications
15:20 - 15:40 Oral presentation
Authors
Meirong Cai; Feng Zhou; Lijun Weng; Weimin Liu
Presenter
Meirong Cai - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Time accumulation effect on multiscale contact transient modeling to piston pump with in mixed lubrication
15:40 - 16:00 Oral presentation
Authors
Jian FU
Presenter
Jian FU - Beihang University (Beijing University of Aeronautics and Astronautics)
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
Special Lubricants and Technologies for Space Science
16:40 - 17:00 Oral presentation
Authors
Weimin Liu; Lijun Weng; Dapeng Feng; Jiayi Sun; Xiaoming Gao; Ming Hu; Haizhong Wang; Desheng Wang; Dan Qiao
Presenter
Weimin Liu - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
From the Shenzhou-7 Manned Spaceship to the China Space Station: The Tribological Journey of Solid Lubricating Films in Low-Earth Orbit
17:00 - 17:20 Oral presentation
Authors
Jun He; Desheng Wang; Ming Hu; Xiaoming Gao; Jiayi Sun; Lijun Weng; Weimin Liu
Presenter
HE, J. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Tribological behavior of Inconel 718 and Cr2O3 coatings in high-temperature steam environments for gas turbine engine applications
17:20 - 17:40 Oral presentation
Authors
Matheus da Silva Pinto; Andre Renan Mayer; Yinyin Zhang; Christian Moreau; Pantcho Stoyanov
Presenter
Matheus da Silva Pinto - Concordia University
Presentation details
Evaluation of Al- and Cu-based sacrificial abradable coatings for aerospace applications
17:40 - 18:00 Oral presentation
Authors
Bruno Edu Arendarchuck; Kaue Bertuol; Francisco Rivadeneira; Barry Barnett; Christian Moreau; Pantcho Stoyanov
Presenter
Bruno Edu Arendarchuck - Concordia University Montreal
Presentation details
Forum Young Tribologists - Roundtable Meentoring
18:20 - 19:20
The roundtable session is designed to foster intergenerational dialogue and provide valuable guidance to emerging tribologists. By bringing together senior and early-career professionals, it enables open, insightful discussions about the future of the field. Geared toward young tribologists, the session offers a unique chance to learn from experienced researchers and industry leaders as they share perspectives on new trends, technological challenges, and evolving career opportunities.
Moderator:
Prof. Salete Martins Alves | Federal University of Rio Grande do Norte (Brazil)
Panelists:
Dr Alfredo Fantetti | Imperial College London (UK)
Dr Andreas Rosenkranz | Universidad de Chile (Chile)
Prof. Hong Liang | Texas A&M University (USA)
Prof. Nicholas D. Spencer | ETH Zürich (Switzerland)
Presentation details
Forum Young Tribologists - Evening
19:30 - 21:30
Forum Young Tribologists - Evening Party
Presentation details
Invited talk - Amir Kadiric
09:45 - 10:10 Invited Speaker
Authors
Amir Kadiric
Presenter
KADIRIC, A. - Imperial College, Imperial College London
Presentation details
Spatially Heterogeneous Superwettability in Groove Surfaces: Anchored Plastron for Underwater Drag Reduction
YU, B. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
Tribo-corrosive response of newly developed high entropy ceramic under saline environment
16:40 - 17:00 Oral presentation
Authors
ARUN GURUVAYURAPPAN; Deepak Kumar
Presenter
Guruvayurappan, A. - Indian Institute of Technology Delhi
Presentation details
Shaft Sealing Mechanism for Dual-Axis Motion under High-Pressure Conditions
17:00 - 17:20 Oral presentation
Authors
Yoshitaka NAKANISHI; Haruto Uchizono
Presenter
NAKANISHI, Y. - Kumamoto University
Presentation details
Tailoring the microstructure of MEROX for tribological use in extreme environmental conditions
17:20 - 17:40 Oral presentation
Authors
ARUN GURUVAYURAPPAN; Deepak Kumar
Presenter
KUMAR, D. - Indian Institute of Technology Delhi
Presentation details
Shaft Sealing Mechanism for Low-Speed Motion under High-Pressure Conditions Based on Hydration Boundary Lubrication
17:40 - 18:00 Oral presentation
Authors
Haruto Uchizono; Yoshitaka NAKANISHI
Presenter
H, UCHIZONO. - Kumamoto University
Presentation details
Round table International Cooperation
18:00 - 19:30
Seamless collaboration between world-class research institutions and industrial pioneers is vital to advancing tribological innovation and solving complex engineering challenges on a global scale. This roundtable discussion focuses on developing robust international cooperation strategies that effectively align cutting-edge academic tribology research with practical industrial needs.
Moderated by Dr David Carlos Domingos (Director of International Business Development, Fraunhofer Institute for Production Systems and Design Technology, Germany), the session brings together a distinguished panel of experts: Prof. Alvaro Toubes Prata (CEO, Embrapii - Brazilian Company for Industrial Research and Innovation, Brazil), Dr Ing. Andreas Klein (Deputy CEO, FVA - Research Association for Drive Technology, Germany), and Prof. Shirong Ge (China University of Mining and Technology, Beijing, China). Together, they will share key perspectives on overcoming barriers and driving sustainable global innovation in the field.
Presentation details
Simple Methods for Predicting Mixed and Boundary Friction
09:45 - 10:10 Invited Speaker
Authors
Ian Sherrington; Robert Ian Taylor
Presenter
Ian Sherrington - University of Lancashire
Presentation details
Multiscale Modelling of Rain Droplet Impact on Wind Turbine Blades
10:10 - 10:30 Oral presentation
Authors
Vinayak Ramachandran Nambiar; Joris Degroote; Wim De Waele; Dieter Fauconnier
Presenter
NAMBIAR, V. R. - Ghent University / Universiteit Gent
Presentation details
The formation mechanism, diffusion behavior, properties of the material transfer layer on the rail surface during ultra-high speed sliding electrical contact
HUANG, S. - State Key Laboratory of Special Materials Surface Engineering, China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd.,
Presentation details
Erosion performance of AlSi-based abradable coating
12:10 - 12:30 Oral presentation
Authors
Natália de Oliveira Sousa; Bruno Edu Arendarchuck; Francisco Rivadeneira; Barry Barnett; Kaue Bertuol; Pantcho Stoyanov
Presenter
SOUSA, N. D. O. - Concordia University Montreal
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:40
Sponsor Lecture
Presentation details
Exploring boron nitride nanotubes as reinforcement to Co-TiC sintered composites at high-tempreature wear against Si3N4 ball counterpart
14:40 - 15:00 Oral presentation
Authors
Oleksandr Tisov; Yurchuk Alina
Presenter
Tisov, O. - Xi'An Jiaotong University
Presentation details
Reducing the humidity dependence of friction and wear of graphite-based solid lubricant coatings
15:00 - 15:20 Oral presentation
Authors
Martin Dienwiebel; Omar Zouina; Alexandros Lappas; Andreas Klemenz; Michael Moseler
Presenter
DIENWIEBEL, M. - Microtribology Centre
Presentation details
Exploration of Adaptive Tribological Surfaces for Aerospace Applications with In-situ Raman Analysis
15:20 - 15:40 Oral presentation
Authors
Andrey A Voevodin; Diana Berman; Samir M Aouadi
Presenter
VOEVODIN, A. A. - University of North Texas
Presentation details
Tribological Performance Evaluation of Electroplated Copper Coatings for Aerospace Journal Bearing Applications
15:40 - 16:00 Oral presentation
Authors
Hironmoy Karmaker; Amit Roy; Maya Harfouche; Richard R. Chromik; Christian Moreau; Pantcho Stoyanov
Presenter
KARMAKER, H. - Concordia University
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
From Lab to Aerospace Engine Application: A Cost-Effective Approach to Fast-Tracking Abradable Material Qualification
16:00 - 16:40 Poster
Authors
Kaue Bertuol; Pantcho Stoyanov
Presenter
Kaue Bertuol - Concordia University
Presentation details
Component-level wear and friction investigation of polymer packing seals exposed to Lunar and Martian regolith simulants
16:00 - 16:40 Poster
Authors
Ádám Kalácska; Patrick De Baets; Róbert Keresztes; György Barkó; Gábor Kalácska
Presenter
Ádám Kalácska - Ghent University / Universiteit Gent
Presentation details
Wear-corrosion resistance of aluminum alloy MAO coating by 3D-printing textured PPUA coatings
16:00 - 16:40 Poster
Authors
Gai Zhao; Guo Zhiyuan
Presenter
Gai Zhao - Nanjing University of Aeronautics & Astronautics
Presentation details
Effects of Drilling Parameters on Thermal and Tribological Behavior of Self-Lubricating Impregnated Diamond Bits for Lunar Dry Drilling
Biomimetic “soft-hard-soft” gradient interface engineering: multi-stage structural synergies and dual-layer tribofilm modulation for enhanced tribological properties of CF/PTFE composites
16:00 - 16:40 Poster
Authors
Yue Zhang; Mingming Yang; Zhaozhu Zhang; Weimin Liu
Presenter
YANG M - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Vat photopolymerization 3D printable self-lubricating polyimide
16:00 - 16:40 Poster
Authors
Xiaolong Wang
Presenter
WANG, X. - Lanzhou Institute of Chemical Physics
Presentation details
Lubrication materials for advanced nuclear reactors
16:00 - 16:40 Poster
Authors
Peng Wang; Liqiang Chai; Beibei Zhang; Weimin Liu
Presenter
WANG, P. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Synergistic Lubrication and Wear Mechanisms of WS2/CaF2 Reinforced lmpregnated Diamond Bit Matrix for Lunar Dry Drilling under High-Temperature Vacuum Conditions
16:00 - 16:40 Poster
Authors
Songcheng Tan; Aikedai Saimaiti; Xiaohong Fang
Presenter
TAN, S. - China University of Geosciences
Presentation details
Study on Regulation of Superlubricity Performance of Hydrogenated Amorphous Carbon-based Films by Trace Doping
16:00 - 16:40 Poster
Authors
Guangan Zhang
Presenter
ZHANG, G. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
High temperature lubricity and mechanism of novel glass lubricant
16:00 - 16:40 Poster
Authors
Long Wang
Presenter
WANG, L. - Northwestern Polytechnical University
Presentation details
Design of an Experimental Setup for Quantifying High-Velocity Droplet Impact Forces
16:00 - 16:40 Poster
Authors
Jean Carlos Poletto; Patrick De Baets; Dieter Fauconnier
Presenter
POLETTO, J. C. - Flanders Make, Ghent University / Universiteit Gent
Presentation details
Abrasive Wear of High Density Polyethylene for Offshore Applications
16:00 - 16:40 Poster
Authors
Karoline Sales de Oliveira Gusmão; Thiago Doca
Presenter
Sales de Oliveira, K. - University of Brasilia
Presentation details
Evolution of Friction and Wear Mechanisms of Aerospace sealing Rubber under Thermal–Oxidative Aging
16:00 - 16:40 Poster
Authors
Qiandiao Wei; Jian Wu; Zhihao Chen; Benlong Su; Youshan Wang
Presenter
WU, J. - Harbin Institute of Technology, Harbin Institute of Technology at Weihai
Presentation details
Solid Particle Erosion of Plasma-nitrided DLC-coated Superduplex 2507 Stainless Steel and Inconel 718
16:00 - 16:40 Poster
Authors
Bruno Corveto Bragança; Julia Mazzoni Moura; Rubson Mação Camporez; Newton Kiyoshi Fukumasu; ANDRÉ PAULO TSCHIPTSCHIN; Nathan Fantecelle Strey; Cherlio Scandian
Presenter
BRAGANÇA, B. C. - Universidade Federal do Espírito Santo
Presentation details
Design of Novel Grease-Based Ultralow Friction and Wear Systems and Their Study in Space Lubrication
16:00 - 16:40 Poster
Authors
Liqiang Zhang; Daoai Wang
Presenter
Zhang. L. - State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
Presentation details
Regulation of High-Temperature Adhesion and Static Friction Behaviors of Superalloys via Surface Topography Control
16:00 - 16:40 Poster
Authors
Yuhui Zou; Bingxue Cheng; Tianmin Shao
Presenter
ZOU, Yuhui - Tsinghua University
Presentation details
Scratch Adhesion Resistance of DLC Coatings on 2507 Superduplex Stainless Steel and Inconel 718 by PVD and PECVD
16:00 - 16:40 Poster
Authors
Rubson Mação Camporez; Fernando Gante Maia de Sousa; Fagner Marçal Andrade; Newton Kiyoshi Fukumasu; ANDRÉ PAULO TSCHIPTSCHIN; Roberto Martins de Souza; Dante Ferreira Franceschini Filho; Nathan Fantecelle Strey; Cherlio Scandian
Presenter
SOUSA, F. G. M. - Universidade Federal do Espírito Santo
Presentation details
Engineered Surfaces and Functional Additives for Extreme-Condition and Sustainable Tribological Applications: A Review
Dynamics of Cage-free Ball Bearings under acceleration condition
17:40 - 18:00 Oral presentation
Authors
Wei Cao; Cheng Chang
Presenter
CAO, W. - Sichuan University
Presentation details
Gala Dinner
19:30 - 22:30
Gala Dinner
Presentation details
High-temperature fretting wear behavior of established Tribaloys and a newly developed high-entropy alloy of reduced Cobalt content
09:30 - 09:50 Oral presentation
Authors
Nora Kind; Johannes Walz
Presenter
WALZ, J. - German Aerospace Center
Presentation details
Glazing of C263 Nickel Superalloy at Extreme Temperatures
09:50 - 10:10 Oral presentation
Authors
Joseph P Harrison; Matthew B Marshall; Kate Tomlinson
Presenter
HARRISON, J.P. - University of Sheffield
Presentation details
Interfacial Tribofilm Evolution and Thermal–Tribological Enhancement of Nylon Rotating Bands via Graphene Oxide Coatings
10:10 - 10:30 Oral presentation
Authors
Shuang Yi
Presenter
Shuang Yi - Nanjing University of Science and Technology
Presentation details
Influence of Hydrogen on the Tribological Behavior of Cast Iron Block/Piston Ring Contacts: First Insights
10:30 - 10:50 Oral presentation
Authors
Miguel Angel Narvaez Ardila; Thiago de Oliveira Santos; Taina Luana da Silva; Regina Paula Garcia; Leonardo Rosa Ribeiro da Silva
Presenter
ARDILA, M. A. N. - Laboratorio de Tecnologia em Atrito e Desgaste
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
Experimental investigation of wear behaviour and debris evacuation in an aerospace-grade material pair under high-temperature conditions
11:30 - 11:50 Oral presentation
Authors
Alice MARINESCU; Marine MENUT; Aurélien SAULOT; Lionel LAFARGE; Benyebka BOU-SAÏD
Presenter
Marinescu A. - Institut national des Science Appliquées de Lyon
Presentation details
Tribological behavior of a a-C coated AISI 4340 under seawater lubricated conditions for Oil and Gas Injection Valves
11:50 - 12:10 Oral presentation
Authors
André Dantas Freire; Larissa Solano de Almeida; Miguel Rubira Danelon; Izabel Fernanda Machado; Roberto Martins de Souza; Newton Kiyoshi Fukumasu
Presenter
FREIRE, A. D. - Universidade de São Paulo
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:40
Sponsor Lecture
Presentation details
Effects of Hydrogen Aging on the Tribology of Molybdenum Disulfide (MoS2)
14:40 - 15:00 Oral presentation
Authors
Craig Barbour; Catherine Fidd; Kylie E. Van Meter; Santiago Lazarte; Christian Micko; Julian Long; Adam Delong; Tomas F. Babuska; John F. Curry; Nicolas Argibay; Brandon A. Krick
Presenter
KRICK, B.A. - Florida Agricultural & Mechanical University, Florida State University
Presentation details
Fretting Wear of High-Temperature Coatings in Flat-on-Flat Contacts for Gas Turbine Blade Tip Applications
15:20 - 15:40 Oral presentation
Authors
Mario Lavella; DANIELE BOTTO
Presenter
Lavella, M. - Università degli Studi di Bergamo
Presentation details
Friction and Wear Failure Mechanism Analysis of SR20 Aircraft Brake Pair
15:40 - 16:00 Oral presentation
Authors
Jiaqi Liu
Presenter
LIU, J. - Civil Aviation Flight University of China
Presentation details
Coffee break
16:00 - 16:40
Coffee break
Presentation details
Coffee break
10:50 - 11:30
Coffee break
Presentation details
Lunch
12:30 - 14:00
Lunch
Presentation details
Sponsor Lecture
12:40 - 13:40
Sponsor Lecture
Presentation details
2026 ASME International Mayo D. Hersey Award Ceremony
16:30 - 16:45
2026 ASME International Mayo D. Hersey Award Ceremony